Kenmore Range 363.9504190 (3639504190, 363 9504190) Parts
Genuine Ge part
By: Ge
Part Number: PM10X310
Specially formulated cleaner for ceramic glass and smooth cooktops. Removes cooked-on food, grease, and spills without scratching. Verify fit by model.
Do-It-Yourself Stories from Customers like You
Cooktop on my kitchenaid slide in range shattered word to wise don't place your pot tops face don on the stove the top formed a vacuum with the top and as the top cooled the vacuum increased to th Marc L. • North Branford , CT • May 16, 2016
VERY simple fix- you do not even have to pull the range out.. I ordered a new cooktop from Appliance parts Pros. The customer sales rep Alphonso was great and walked me through the general process. I could find no explicit instructions for the repair but I muddled my way through. The fix is simple on Kitchenaid/Whirpool slide in ranges. 1. Open the oven door and remove the two phillips head screws directly below the control panel that hold the panel down.2. Lift the control panel upward and...
Read more
More
$14.78
- Compare At:
-
$17.44
- You Save:
-
$2.66
Genuine Ge part
By: Ge
Part Number: WB44K5012
Oven won't heat or bakes unevenly? A failed bake element is often the cause. Located at the bottom of the oven, this part is a straightforward DIY fix.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Oven is too hot
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Element burn into Richard D. • Summerville , GA • April 02, 2014
Took out old element,got part number and look for the cheapest price online, Appliance Parts Pro could not be beat... order part be number, easy to match, came in fast and put in element, only needed a 5/16 nutdriver to take it out and put it in,unpluged wires and bent just a little to keep one on left and one right from getting mixed up and pluged up new element and ran in the 2 screws,easy job, dont get no easier.. Thanks again Appliance Parts Pro
Read more
More
$46.31
- Compare At:
-
$62.33
- You Save:
-
$16.02
Genuine Ge part
By: Ge
Part Number: WB2X9719
The Support Bracket is an OEM part for GE ovens, designed to provide stability and support for the broiling element. This bracket is essential for ensuring the broiling element is securely positioned at the top of the oven, allowing for even heat distribution and optimal cooking performance when broiling foods.
Causes of damage to the support bracket often involve high heat exposure, accidental impacts during cleaning or cooking, or general wear and tear over time.
Symptoms of a bad Support Bracket include:
- The broiling element hanging lower than usual or touching the oven cavity, which can affect cooking performance and potentially damage the oven's interior.
- Unstable or loose broiling element, leading to uneven cooking or broiling.
- Visible signs of wear, damage, or corrosion on the bracket itself, indicating it may no longer provide adequate support.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Lower oven bake heating element was broken in half Richard P. • Colleyville , TX • September 19, 2014
Watched the appliancepartspro video and changed it out. It took about 15 minutes. I'm sure I saved hundreds.
Read more
More
$8.69
- Compare At:
-
$10.34
- You Save:
-
$1.65
Genuine Ge part
By: Ge
Part Number: 40A15
The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments.
All light bulbs will eventually burn out with consistent use over many years. Vibration during compressor cycles can also potentially disrupt bulb filaments faster.
Symptoms of a burnt out refrigerator light bulb include:
- Dim or no light illuminating inside refrigerator shelves
- Shadows and dark spots making it difficult to find items
- Higher utility costs from leaving the door open to see inside
This bulb is also compatible with refrigerators from brands like Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Nothing worked except the light :) Przemyslaw B. • Wallington , NJ • September 20, 2014
I changed the motherboard - computer and also changed the motor in the freezer, because it was doing a howling sound every time it turned on. The repair technician asked for $500 for a repair and that is on top of the $230 I paid him two days before. I looked up the parts and decided to try myself and it paid off. Great instructional videos. Thanks
Read more
More
$19.95
- Compare At:
-
$23.54
- You Save:
-
$3.59
Genuine Ge part
By: Ge
Part Number: WB44X232
Broil element broken or not heating? This top heating element restores high-heat broiling in electric ovens. DIY-friendly repair, typically done in under 30 minutes.
This part fixes the following symptoms
-
Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You
Oven broil element was broken in half after self cleaning cycle Charles R. • Charlotte , NC • January 24, 2015
I needed to replace the oven broil element on my 15 year old GE range/oven unit. The broil element was broken in half during an oven self-cleaning cycle. Due to the age of the oven, I decided to replace both the broil and bake elements. I ordered the elements from Appliance Parts Pro. Their web site made it very easy to identify and locate the correct replacement parts. The parts arrived in 2 days. I watched the repair demo videos available for each element. Although the oven used in the demo...
Read more
More
$71.36
- Compare At:
-
$84.92
- You Save:
-
$13.56
Genuine Ge part
By: Ge
Part Number: WB48X10056
Broiler pan for ranges and ovens. Installs in main oven cavity to hold food under broiler element. Replace if cracked, warped, or heavily stained.
Do-It-Yourself Stories from Customers like You
None Ralph W. • Brentwoo , NY • July 13, 2014
Fast delivery, great service
Read more
More
$31.95
- Compare At:
-
$38.02
- You Save:
-
$6.07
Genuine Ge part
By: Ge
Part Number: WB1X1293
Secures the igniter to the burner assembly in gas ranges and ovens. Replace if stripped, missing, or damaged during igniter replacement or repair.
Do-It-Yourself Stories from Customers like You
Failure to hold temperature after preheating. Michael D. • Wilmington , DE • January 07, 2023
I was getting really frustrated with our oven. It would preheat to the correct temperature, then slowly lose heat until it was down to about 200 degrees. So it took about two hours to heat a pizza!
Finally decided to repair the oven myself, rather than pay $300.00 to have a repair person come out. Ordered the replacement igniter from AppliancePartsPros.com, and it arrived in two days.
I followed the instructional video on the AppliancePartsPros.com website, and it was going well until I...
Read more
More
$11.34
- Compare At:
-
$13.49
- You Save:
-
$2.15
Genuine Ge part
By: Ge
Part Number: WB14X104
Replaces a cracked, worn, or broken oven door hinge. Installs on the right side, allowing the door to open and close smoothly and securely.
Do-It-Yourself Stories from Customers like You
The left oven door hinge was siezing door would not open fully Tom J. • Powder Springs , GA • November 19, 2014
I ordered both hinges (if the nylon roller was bad on the left, it was probably going to go bad on the right side as well). The web site was easy to navigate, order process simple. Hinges arrived quickly. Slide the oven door up and off. unscrew the three screws for the hinge. You need to then pull up with some force (there is a big spring in there), and twist the hinge to get the last bit out. I used a hemostat to hold the spring and keep it from falling back into the hole. removed the...
Read more
More
$54.51
- Compare At:
-
$64.87
- You Save:
-
$10.36
Genuine Ge part
By: Ge
Part Number: WB14X103
Left side oven door hinge provides smooth opening and closing operation. Replace if cracked, seized, worn, or binding. Mounts to oven cavity interior.
Do-It-Yourself Stories from Customers like You
The left oven door hinge was siezing door would not open fully Tom J. • Powder Springs , GA • November 19, 2014
I ordered both hinges (if the nylon roller was bad on the left, it was probably going to go bad on the right side as well). The web site was easy to navigate, order process simple. Hinges arrived quickly. Slide the oven door up and off. unscrew the three screws for the hinge. You need to then pull up with some force (there is a big spring in there), and twist the hinge to get the last bit out. I used a hemostat to hold the spring and keep it from falling back into the hole. removed the...
Read more
More
$50.26
- Compare At:
-
$59.81
- You Save:
-
$9.55
Genuine Ge part
By: Ge
Part Number: WB23M24
6" element switch
Do-It-Yourself Stories from Customers like You
The burner would not stay at the temperature you wanted. It would go to high eventually. Ronald S. • Columbia , SC • February 05, 2022
Talked to a representative at your company they said it was probably the infinite switch.
I purchased all four switches, replaced all four burner switches. Very easy to do. In less than an hour to replace all four.
Read more
More
$96.53
- Compare At:
-
$115.84
- You Save:
-
$19.31
Genuine Ge part
By: Ge
Part Number: WB1M1
ST10-16 X 7/16"
Do-It-Yourself Stories from Customers like You
Bottom heating element not working on a ge electric range David K. • Portsmouth , RI • December 21, 2014
Move stove to unplug, remove rear center panel, indentify the two spade connectors that feed the heating element and remove (unplug) them. Remove two screws that hold the element to the inside rear wall of the stove and remove element. Install new element, plug in the previously removed spade connectors, re-install rear center panel, plug range (power) in, move stove back into place and enjoy.
Read more
More
$7.65
- Compare At:
-
$9.10
- You Save:
-
$1.45
Genuine Ge part
By: Ge
Part Number: WB25T10042
Indicator light lens covers and diffuses the panel light on your range or oven. Replace when cracked, discolored, or missing to restore visibility.
Do-It-Yourself Stories from Customers like You
Indicator light stopped working Elizabeth C. • Olympia , WA • January 28, 2026
Super easy with your parts and directions
Read more
More
$7.95
- Compare At:
-
$9.38
- You Save:
-
$1.43
Genuine Ge part
By: Ge
Part Number: WB17X5095
The Terminal Block is an OEM part for GE electric ranges. It serves as a critical junction point where the range's wiring connects to the heating elements, ensuring proper electrical flow and operation of the oven and cooktop. This component is essential for the safe and efficient functioning of your appliance.
Causes of a bad terminal block can include overheating due to electrical surges, corrosion from prolonged exposure to heat and moisture, or physical damage from improper installation or handling.
Symptoms of a bad terminal block include:
- The oven or burners not heating properly
- Visible signs of burn marks or corrosion on the block
- Electrical arcing or sparking
- Intermittent or no power to the heating elements
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Bad wire on terminal block of electric range caused the stove to quit working 3days before thanksgiving Stephen Y. • San Antonio , TX • November 25, 2016
Replaced the power cord, bur terminal block fell apart. Ordered replacement part, and overnight shipping. Received the next day and completed repairs. Cheered up my wife, for sure.
Read more
More
$75.95
- Compare At:
-
$91.14
- You Save:
-
$15.19
Genuine Ge part
By: Ge
Part Number: WB15X10225
This replacement range handle restores a secure, easy-to-grip handle for ranges that use part WB15X10225. It returns normal door operation and improves safety and usability for ovens with a damaged or missing handle. What it does:
- Replaces a cracked, broken or loose range/oven door handle.
- Provides a stable gripping surface for opening and closing the oven door.
- Stops handle wobble and prevents accidental detachment during use.
- Matches the factory-style fit and function for straightforward replacement.
What's included: One range handle. Install notes:
- Disconnect power to the appliance before beginning any repair.
- Follow the range/oven manufacturer's door-removal and reassembly instructions when required.
- Basic hand tools are typically required; handle screws fasten securely to the door.
Do-It-Yourself Stories from Customers like You
The range handle fell off and bake element stopped working Victor G. • Murfreesboro , TN • January 12, 2020
I reinstalled the handle. I disconnected the power and replaced the bottom element.
Read more
More
$88.95
- Compare At:
-
$106.74
- You Save:
-
$17.79
Genuine Ge part
By: Ge
Part Number: WB1K5062
Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.
Do-It-Yourself Stories from Customers like You
Intermittant clicking of ignitor Sharon K. • Chandler , AZ • May 09, 2016
My husband gets irked when I take it upon myself to do appliance repair. This isn't my first project. I looked at various websites and found this one very helpful. Information was consistent with what the GEappliance website had. Video instilled confidence that the job could be simply done. Price was right and a new ignitor module was installed; easy peasy! Appliance works like new!
Read more
More
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Genuine Ge part
By: Ge
Part Number: WB01X32746
This replacement screw fastens panels, brackets, or trim inside your appliance. Swapping in a new screw restores a tight, secure fit and helps stop rattles, looseness, or misalignment caused by missing or damaged hardware.
- Secures panels, brackets, or trim to the appliance chassis
- Helps maintain proper alignment and spacing of components
- Replaces missing, rusted, or stripped hardware
- Helps resolve loose panels/handles, vibration, or rattling noises
What's included: One screw Install notes:
- Disconnect power before servicing; for gas appliances, also shut off the gas supply
- Match the screw to the original location; start threads by hand to avoid cross-threading
- Use the appropriate driver and tighten snugly without overtightening
- Inspect the mounting hole or clip for damage and address as needed before reassembly
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99