Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Kenmore Washer Dryer Combo 417.97822700 (41797822700, 417 97822700) Parts

Best Seller
Spin Bearing Washer
Genuine Frigidaire part
By: Frigidaire
Part Number: 5308002401

The Spin Bearing Washer is an OEM part for Frigidaire washing machines. Situated inside the transmission housing, this thin metal washer acts as a subsurface support for the belt pulley bearing. The spin-bearing washer facilitates smooth, balanced rotation essential for agitated and spun wash cycles.

Causes of a bad spin-bearing washer include wear and fatigue from years of successive rotations, potentially allowing excessive movement between housing components.

Symptoms of a bad spin-bearing washer involve:

  • Vibration or shaking noises coming from inside the washer cabinet
  • Belt slippage wasting energy by inefficiently spinning loads
  • Increased friction resulting in longer cycle times for spins
  • Failure of belts or other components from unsupported bearing

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This part fixes the following symptoms
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Noisey bearing on spin cycle   Neal G. • Klamath Falls , OR • February 14, 2016

I replaced the spin bearing, tub seal, washer and drive belt since I had it all apart. The video was extremely helpful...I would have tore the whole thing apart trying to figure out how the agitator came off....but it was very simple. Read more

More
$11.95
Compare At:
$14.22
You Save:
$2.27

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Motor,Dryer Drive,With Pulley
Genuine Frigidaire part
By: Frigidaire
Part Number: 8581341966035

 

Do-It-Yourself Stories from Customers like You My stack fridgidare washer dryer approximatly six years old dryer did not work   Ronald G. • Venice , FL • November 14, 2014

I used the internet and checked a dry fuse, and it tested ok. Checked the start switch, ok. So it had to be the motor. Sharon at the company agreed. Motor, and belt arrive very fast. ordered the belt because, if I had it apart why not change it. Internet also helped get the dryer apart. Found on u-tube a repairman cut a hole in the side to gain easy access. This dryer is not easy to work on, but this helped, and will make further repairs much easier. Using the internet, and... Read more

More
$99.04
Compare At:
$110.04
You Save:
$11.00

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Door Strike
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303207102

Dryer door won't stay closed? The door strike secures the door latch during operation. Quick DIY fix—installs from the front in minutes.

This part fixes the following symptoms
  • Door won't close
See more...
Do-It-Yourself Stories from Customers like You Frigidaire dryer door would not stay closed   Carolina L. • Miami , FL • September 08, 2015

My dryer door would not stay shut because the door strike was stuck in the door catch. I was afraid that when I pulled the strike out, it would damage the catch, so I ordered the door strike and door catch. I got the damaged door strike out with needle nosed pliers in about 15 seconds. The door catch was in perfect condition so I didn't need to use the one I ordered. So then I proceeded to install the new door strike. That took me about 15 minutes because I did not have the manual strength to... Read more

More
$28.95
Compare At:
$34.45
You Save:
$5.50

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Timer Knob
Genuine Frigidaire part
By: Frigidaire
Part Number: 131873304

The Dryer Timer Knob is an OEM part for Frigidaire dryers. It is responsible for allowing users to set the drying time and cycle selection by turning the timer shaft. The knob securely attaches to the timer and provides an easy way to control dryer settings.

Over time, the timer knob can become damaged due to repeated use, excessive force when turning, or wear on the internal connection points. If the knob becomes stripped, cracked, or no longer stays in place, it may need to be replaced.

Symptoms of a bad timer knob include:

  • The knob spins freely without adjusting the timer
  • Cracks or breaks in the knob
  • Difficulty selecting or changing dryer settings
  • The knob does not stay attached to the timer

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You The dryer knob cracked and no longer turned the dryer on   Patty G. • Lexington , SC • November 02, 2015

The old knob was not repairable. I ordered a new knob for the washer dryer stack unit. The order came within two days of ordering and it was the correct part. I was pleased. Read more

More
$51.46
Compare At:
$61.24
You Save:
$9.78

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Start Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 134399700

The Start Switch is an OEM replacement part for Frigidaire dryers. This part initiates the dryer's cycle once the user selects the desired settings. By pressing the start switch, the motor activates, and the drying process begins, ensuring clothes are dried according to the selected specifications.

Symptoms of a bad Start Switch include:

  • The dryer not starting when the switch is pressed
  • Intermittent starting issues, where the dryer sometimes starts and sometimes doesn’t
  • The need to hold the switch in place to keep the dryer running
  • Unusual noises when the switch is pressed

Causes for a malfunctioning Start Switch can include electrical issues, such as faulty wiring or connections, wear and tear from frequent use, or internal failures within the switch mechanism that prevent it from signaling the motor to start.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dryers.

Do-It-Yourself Stories from Customers like You Start switch knob broke off.   Jeff O. • Laurier , WA • March 07, 2018

I went online, ordered the part and installed it,,, took 15 minutes to install,,,saved huge $$$ easy peasy!! :-) Read more

More
$67.28
Compare At:
$80.06
You Save:
$12.78

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Bracket
Genuine Frigidaire part
By: Frigidaire
Part Number: 131724301

The Drum Bearing Bracket is an OEM replacement part for Frigidaire dryers. It holds and supports the drum bearing, which allows the dryer drum to spin smoothly during the tumbling and drying cycle.

Causes of failure can be cracking or breaking of the bracket over time due to constant use and stress. Improper installation that puts strain on the bracket may also lead to issues.

Symptoms of a bad drum bearing bracket include:

  • Excessive vibration or shaking during operation
  • Loud grinding or scraping noises
  • The dryer drum not spinning properly or at all
  • Premature wear of the drum bearing

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer drum would not turn   J Kent I. • Anderson , IN • February 22, 2019

I watched the helpful diy video. It gave me what the problem was and the confidence to do it. Took my dryer apart with the helpful hints in the video repair went smooth. Works like a dream and I saved money. Thank you appliance parts pros. Read more

More
$19.63
Compare At:
$21.46
You Save:
$1.83

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Drain Hose
Genuine Frigidaire part
By: Frigidaire
Part Number: 134592700

Replacement drain hose directs used water from your washer to the household drain. Needed when original hose is cracked, split, or leaking.

Do-It-Yourself Stories from Customers like You Washer drain hose split in half   Will W. • Steele , AL • April 19, 2014

Our washer is next door the bathroom. So when, during the rinse cycle, the hose split and we found the back of the house completely flooded I initially assumed the culprit was either the toilet or the sink or possibly an interdimentional portal into a demonic netherworld of vaguely chlorine scented water. I spent the next hour mopping it all up and checking and re-checking the pipes in the bathroom with no apparent leaks. The next load of laundry left more clues as this time the flood was from... Read more

More
$71.36
Compare At:
$84.20
You Save:
$12.84

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Drum Bearing Ball
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303281019

Dryer drum bearing ball ensures smooth drum rotation. Replace if drum wobbles, squeaks, or won't turn. Confirm fit with your model number before ordering.

Do-It-Yourself Stories from Customers like You Dryer drum would not turn   J Kent I. • Anderson , IN • February 22, 2019

I watched the helpful diy video. It gave me what the problem was and the confidence to do it. Took my dryer apart with the helpful hints in the video repair went smooth. Works like a dream and I saved money. Thank you appliance parts pros. Read more

More
$12.95
Compare At:
$15.41
You Save:
$2.46

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Screw (8-18 Thread)
Genuine Frigidaire part
By: Frigidaire
Part Number: 131168200

This factory 8-18 screw secures appliance panels, brackets, and components. Replace missing or stripped hardware to restore a tight, rattle-free assembly and dependable operation.

  • Fastens components to frames, brackets, and covers
  • Replaces missing, damaged, or rusted screws
  • Helps reduce looseness, vibration, and rattling noises
  • Restores proper alignment of panels and assemblies
What's included: One screw
  • Disconnect power before servicing; shut off gas/water if applicable
  • Start the screw by hand to avoid cross-threading; use the proper driver
  • Tighten snugly—do not overtighten to prevent stripping metal or plastic

Do-It-Yourself Stories from Customers like You Grill on air duct had an item melt on to it and partially block air flow   Charles C. • Orchard Park , NY • November 25, 2017

It was easy to find the part on appliance parts pros. Once I found it I studied the diagram and determined that there were 3 screws in the drum that needed to be removed. I disconnected power and then removed 3 interior screws. Once I did that I removed the back cover and removed the single screw on the bottom side of the air duct that held it in place connected to the heat tube. I then reversed disassembly. I want to tell you this is a 2 person job. In order to assemble it you need to... Read more

More
$19.95
Compare At:
$23.94
You Save:
$3.99

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Door Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 134813600

This door switch senses whether the appliance door is closed and signals the controls to run only when it's safe. Replacing a worn or intermittent switch restores dependable starts and proper shutoff when the door opens. What it does:

  • Detects door position and allows operation only when the door is fully closed
  • Interrupts operation when the door opens for safety
  • Common symptoms include: won't start, stops when the door is moved, or "door open" message/error
  • Intermittent starts due to worn actuator or internal switch contacts
What's included:
  • 1 door switch
Install notes:
  • Disconnect power before servicing
  • Access the switch from the front or top panel; release mounting screws or tabs
  • Move wires to the new switch one at a time to maintain correct positions, then secure the switch
  • Test operation before reassembly

More
$51.95
Compare At:
$61.82
You Save:
$9.87

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Leveling Leg
Genuine Frigidaire part
By: Frigidaire
Part Number: 134548800

Adjustable leveling leg that screws into the washer cabinet to stabilize and level your appliance. Replace if broken, damaged, or missing to prevent rocking.

Do-It-Yourself Stories from Customers like You Water leak under tub   Hector D. • Lubbock , TX • December 07, 2014

After watching YouTube videos on possible cause, went to appliancepartspros and order seal and leveling legs since the had been missing since machne was given to us. Parts came in within the week and replaced . No more leaks!! Read more

More
$20.45
Compare At:
$24.34
You Save:
$3.89

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Clamp
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304488479

This factory clamp secures a hose or tubing connection so it stays tight during normal operation. Replace a worn or rusted clamp to restore a firm hold and help prevent leaks, drips, or accidental disconnections.

  • Holds a hose, tube, or duct firmly to its fitting
  • Helps maintain a sealed connection under vibration
  • Helps resolve loose connections, drips/moisture at a joint, or rattling noises
  • Common wear includes loss of tension, corrosion, or visible damage
What's included: 1 clamp Install notes:
  • Disconnect power; if servicing a water line, shut off the water supply
  • Note the original clamp position and orientation before removal
  • Use appropriate hand tools (pliers, screwdriver, or nut driver as applicable)
  • After installation, test for leaks or movement

Do-It-Yourself Stories from Customers like You Fan making banging sound in housing   Keith N. • Kaukauna , WI • April 25, 2015

The blower wheel center was worn down and spinning freely on shaft. Removing front covers, controls and brackets gave access to blower, which front half came off removing screws. (One screw underneath bracket) Pushed new blower on. (It's keyed and has small tabs that line up with groove on shaft). Installed clamp, reassembled and tested. Don't forget to pull the plug out before working on any appliance. Read more

More
$14.95
Compare At:
$17.79
You Save:
$2.84

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Motor Start Capacitor
Genuine Frigidaire part
By: Frigidaire
Part Number: 131212301

Washer motor won't start or stops mid-cycle? This motor start capacitor stores electrical energy to start your washer motor. Moderate DIY repair.

Do-It-Yourself Stories from Customers like You Top loading washer would not agitate or spin h20 out after a clicking noise; the motor wouldn't engage or would start & then stop finally figured that it was the motor &/or capacitor   Susan S. • Pelkie , MI • October 31, 2014

I found your site which was most helpful. I saw on your forum, that others had replaced a motor & capacitor with + results. I was willing to spend what I thought was a reasonable amount & your guarantee was the clincher. I knew that if I called the appliance store where we had purchased the washer in 1998, it would be very expensive & even more important, it would take many days as they would have to order the part & then schedule a service call. I installed the motor & capacitor & was... Read more

More
$15.50
Compare At:
$18.45
You Save:
$2.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Clip - Ball
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303281020

For a complete drum bearing and shaft kit order 5303281153.

Do-It-Yourself Stories from Customers like You Dryer drum would not turn   J Kent I. • Anderson , IN • February 22, 2019

I watched the helpful diy video. It gave me what the problem was and the confidence to do it. Took my dryer apart with the helpful hints in the video repair went smooth. Works like a dream and I saved money. Thank you appliance parts pros. Read more

More
$12.95
Compare At:
$15.54
You Save:
$2.59

IN STOCK
Ships Today Guaranteed
Add to Cart
Drum Baffle Screw (Vane)
Genuine Frigidaire part
By: Frigidaire
Part Number: 131302800

This vane screw secures the internal drum baffle (vane) to the drum, keeping loads turning properly and preventing rattles or snags. Replace a missing or stripped screw to restore a tight, stable baffle during cycles.

  • Fastens the drum baffle/lifter (vane) to the rotating drum
  • Helps maintain proper tumble and load turnover
  • Common symptoms: loose or wobbly baffle, rattling or clunking noises, items catching on a raised baffle edge, or a baffle that detaches
  • Visual cues: missing screw or stripped/damaged threads at the baffle mounting holes
What's included: One screw
  • Disconnect power before servicing; shut off gas
  • Access the baffle from inside the drum; align holes and start the screw by hand to avoid cross-threading
  • Tighten firmly but do not overtighten to prevent stripping the drum or cracking the baffle
  • Start all screws before final tightening to seat the baffle evenly

Do-It-Yourself Stories from Customers like You The pump hose had a tear in it and the water hoses were in bad shape   Steven V. • El Cerrito , CA • September 21, 2014

Unscrewed the front lower panel ( 2 screws ). Disconnected the pump hose clamp and removed the hose. I loosened the lower back panel and pulled out the drained hose from the rear. Replaced with new hose put back clamp and panels. Very easy Read more

More
$17.95
Compare At:
$21.54
You Save:
$3.59

IN STOCK
Ships Today Guaranteed
Add to Cart
Gasket
Genuine Frigidaire part
By: Frigidaire
Part Number: 137551901

This gasket is a sealing component used in select appliances. It fits between two mating parts to keep water or air where it belongs, helping prevent leaks and ensuring proper performance. What it does:

  • Forms a tight seal between components or housings
  • Helps prevent water drips, seepage, or air leaks at the joint
  • Maintains correct appliance performance by keeping moisture/airflow contained
  • Replace if the gasket is cracked, torn, flattened, or misshapen
  • Common signs include residue, moisture, or visible gaps around the seal
What's included:
  • 1 gasket
Install notes:
  • Disconnect power; turn off the water supply before servicing
  • Note the orientation of the old gasket prior to removal
  • Clean and dry the mating surfaces; remove any old gasket residue
  • Seat the new gasket evenly without stretching; reassemble and check for leaks or proper seal

Do-It-Yourself Stories from Customers like You They are 20 year old   Bruce A. • Folsom , CA • March 19, 2018

This was more maintenance than a fix. I replaced the door gasket and temp sensor on my dryer. Thought what the heck and it might work more efficiently. I also replaced the shocks on my front loading washer. That was a bit of a chore, but could not have done it without the video that showed how to replace them. The socket was the life saver. All is working just fine. Who knows maybe I'll get another 20 year out of them. Read more

More
$50.36
Compare At:
$59.93
You Save:
$9.57

IN STOCK
Ships Today Guaranteed
Add to Cart
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store