Kenmore Refrigerator 596.71103101 (59671103101, 596 71103101) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90767
The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.
This part fixes the following symptoms:
- Loose or wobbly components within the appliance
- Panels or parts that are not securely attached
- Rattling or unusual noises due to loose parts
- Damaged or missing screw
The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Certain buttons were'not working Brent T. • Easton , MD • November 17, 2014
One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS!
p.s. In doing my research come to find Maytag did little to insulate control panel from oven...
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Whirlpool part
By: Whirlpool
Part Number: WP628356
This icemaker fill cup and bearing assembly directs water from the inlet tube into the ice mold and provides the pivot point for the shutoff arm. Replacing a cracked or missing cup helps stop leaks, misdirected fills, and inconsistent ice production.
- Channels incoming water into the ice mold to prevent splashing and overfilling
- Provides the pivot/bearing for the ice level (shutoff) arm
- Helps maintain consistent cube size and reliable icemaker shutoff
- Typical symptoms: water or ice buildup under the icemaker, overfilling or hollow/irregular cubes, or a loose/binding shutoff arm
What's included: 1 fill cup and bearing assembly Install notes:
- Unplug the refrigerator and shut off the water supply before servicing
- Remove the ice bin and detach the icemaker to access the side-mounted cup
- Position the new cup directly under the fill tube; secure with existing hardware and verify the shutoff arm pivots freely in the bearing
- Restore power and water; run a test fill and check for leaks
This part fixes the following symptoms
-
Ice maker dispenses too much ice
-
Leaking
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Broken part Eva H. • Walnut Creek , CA • March 23, 2014
Watched online video and worked along - it was easy and quick - I was amazed!
Read more
More
$32.42
- Compare At:
-
$38.58
- You Save:
-
$6.16
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12550101Q
Color: Black. Size: 23 3/4 inches x 31 1/2 inches. For white order WP12550116Q.
Do-It-Yourself Stories from Customers like You
The freezer door gasket was coming apart and wasn't sealing properly any more Leonard M. • Sunnyvale , CA • August 23, 2014
I ordered the replacement gasket and...replaced it.
One issue was that the replacement procedure was not at all like the video to which I was directed when I got the gasket. The video showed a gasket with a rigid flange that had to be inserted into the door structure. On my Amana, I clearly had to remove the inner plastic liner and set the gasket under it. This was not particularly difficult but certainly wasn't the same process.
Also, I removed the freezer door to do the replacement in...
Read more
More
$115.53
- Compare At:
-
$137.48
- You Save:
-
$21.95
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10348409
This factory screw secures appliance components. It restores a tight, reliable hold when the original hardware is stripped, missing, or corroded—helping prevent vibration and keeping panels and brackets properly aligned.
- Provides threaded fastening for panels, brackets, covers, or internal components
- Replaces worn, rusted, stripped, or missing hardware
- Helps reduce vibration and rattling from loose parts
- Restores proper alignment and a secure fit of attached parts
What's included: Includes 1 screw. Installation notes:
- Disconnect power; turn off water supply before service
- Note original screw location and retain any spacers or clips for reassembly
- Start threads by hand to avoid cross-threading
- Tighten snugly; do not overtighten to prevent stripping
Do-It-Yourself Stories from Customers like You
Dishwasher would not start Mark M. • Midlothian , VA • July 16, 2016
Maytag Dishwasher (about 5 years old). Some of the buttons had stopped functioning. Then the Start button began choosing whether or not to work. Eventually it would not start at all. Upon removing the control panel, the first thing I noticed was that the brackets that hold the two lower screws were broken. (So this was the reason that the door was so hard to open from the time it was new.) I trouble shot the thermal fuse, the door-latch switches, and inspected the control board trying to find...
Read more
More
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: W11176463
The Icemaker Fill Tube is an OEM replacement part for Whirlpool refrigerators. It delivers water to the icemaker, allowing it to produce ice cubes. It is responsible for directing water from the water inlet valve to the icemaker tray, where it freezes into ice cubes.
A bad fill tube can occur due to wear and tear, blockages, or damage. If you notice symptoms such as no ice production, leaking water, or ice cubes with an unusual shape or size, it may be time to replace the fill tube.
Symptoms of a bad fill tube include:
- No ice production or limited ice output
- Leaking water around the icemaker area
- Irregularly shaped or oversized ice cubes
Repair your refrigerator by replacing the faulty or damaged fill tube with this genuine OEM part.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Water was leaking & then freezing in the bottom of the freezer compartment Ronald S. • Frankfort , IL • December 30, 2014
Replaced the water tube that went from the plastic tubing to the ice cube tray. Found that even though it was the same exact length as the original, there was only an extremely small gap from the end of the tube to a splash board. This may have been the root cause of my problems.
Read more
More
$54.95
- Compare At:
-
$65.39
- You Save:
-
$10.44
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67001255
This refrigerator ice bucket stores ice made by the icemaker and positions it for dispensing. Replacing a cracked or warped bin restores smooth ice flow and helps prevent jams, spills, and mess inside the freezer.
- Holds and contains ice cubes in the freezer for easy access and dispensing
- Interfaces with the auger/crusher assembly in dispenser-equipped models
- Helps correct issues like ice jamming or inconsistent dispensing caused by a damaged bin
- Addresses visible damage such as cracks, chips, warping, or a bucket that won't seat properly
- Can reduce stray ice or moisture under/around the bin when the original is compromised
What's included: 1 ice bucket Install notes:
- Unplug the refrigerator and turn off the icemaker/water supply before starting
- Remove the old bin; transfer any auger/crusher components from the original if your model uses them
- Seat the new bucket fully so it latches/aligns correctly with the drive
- Restore power and verify proper dispensing operation
Do-It-Yourself Stories from Customers like You
Passed down fridge was missing ice bin Samuel F. • St. Joseph , IL • July 06, 2015
We found the right ice cub bin/pan, ordered it, and it arrived quickly. Fit perfectly, and it is now catching our ice.
Read more
More
$98.73
- Compare At:
-
$116.50
- You Save:
-
$17.77
Genuine Whirlpool part
By: Whirlpool
Part Number: WP627018
Size: 1/4 inch. Nut for plastic water line.
Do-It-Yourself Stories from Customers like You
Broken y connector off of water valve on amana refridgerator Greg S. • El Dorado Hills , CA • October 19, 2014
Ordered part from AppliancePartsPros.com and received it 2 days later. Put the part in, fit like a glove, water and ice cube maker working flawlessly again with no leaks. Thanks.
Read more
More
$11.95
- Compare At:
-
$14.34
- You Save:
-
$2.39
Genuine Whirlpool part
By: Whirlpool
Part Number: 10461901
Color: white. Measures about 1-1/2 inches wide by 7-1/2 inches high by 2 inches deep.
Do-It-Yourself Stories from Customers like You
Crisper drawers sagging Graham J. • Valley Springs , CA • September 19, 2016
Ordered support post. Tenants were moving in Monday. Ordered on Wednesday, part arrived Friday. Took minutes to install. Fast ,easy ordering. Unit is ready for tenants. I'm am very satisfied.
Read more
More
$29.68
- Compare At:
-
$35.62
- You Save:
-
$5.94
Genuine Whirlpool part
By: Whirlpool
Part Number: WPB5705307
Ice maker water line: 1/4x 8ft.
Do-It-Yourself Stories from Customers like You
Water leak and broken parts inside refrigerator Todd B. • Indianapolis , IN • August 28, 2017
Replaced the broken parts. The water leak was caused by the drain valve not directed into drain pan
Read more
More
$16.95
- Compare At:
-
$20.00
- You Save:
-
$3.05
Genuine Whirlpool part
By: Whirlpool
Part Number: W10752646
This thermostat is a temperature safety device that opens the circuit if temperatures climb beyond the safe threshold. Replacing a failed thermostat helps protect the appliance from overheating and restores normal heating performance.
- Monitors internal temperature and cuts power if it overheats
- Helps prevent damage to components from excessive heat
- Common failure signs include no heat, intermittent heat, or the unit shutting off on high heat
- Shows continuity when cool and open when tripped
What's included: Thermostat only Install notes:
- Disconnect power before service; verify no voltage is present
- Access location varies by model; note wire positions and transfer one at a time
- Mount firmly against the intended surface for proper sensing
- After replacement, verify airflow/venting and clear lint/debris to avoid repeat trips
Do-It-Yourself Stories from Customers like You
Refrigerator and freezer not cooling. Tom C. • Dorchester , MA • March 06, 2021
Tested start relay and fan with multimeter both passed.
The condenser would start only if the thermostat was on the highest setting and the refrigerator would cool for a while, stop and not restart unless I adjusted the defrost timer. Decided to replace the thermostat, defrost timer and defrost thermostat. The refrigerator is working as expected. FYI on a Kenmore 59669142992 the defrost timer is located under the freezer in the front right.
Read more
More
$105.60
- Compare At:
-
$126.72
- You Save:
-
$21.12
Genuine Whirlpool part
By: Whirlpool
Part Number: W10833899
This electrically actuated valve controls the flow of household water into your appliance during operation. Replacing a sticking or leaking valve restores proper fill performance and helps prevent unwanted dripping between cycles. What it does:
- Opens and closes to admit the correct amount of water at the right time
- Helps maintain stable water pressure and shutoff to the unit
- Common symptoms of a failing valve: no fill, slow/insufficient fill, water seeping into the tub when off, or leaks from the valve body
- May buzz or hum without allowing water flow when the internal coil or screen has failed or is clogged
What's included:
Install notes:
- Disconnect power and shut off the water supply before servicing
- Keep towels or a tray handy; some residual water will drain
- Note hose and wire orientations; transfer any brackets or fittings from the original valve
- After installation, restore water and power, check for leaks, and run a test fill cycle
This part fixes the following symptoms
-
Ice maker won't dispense ice
-
Ice maker not making ice
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
Ice maker leaking water into ice container through ice maker Matthew V. • Knoxville , TN • November 22, 2015
After some research on the internet,I found out that the most likely cause was a failed water inlet valve. The refrigerator is quite old so I wasn't going to spend an arm and leg on it to fix it. I was pleasantly surprised to find the part, at a reasonable price, that I needed on this website with a helpful how-to video to boot. The part I needed wasn't in stock. I was followed up with an e-mail stating an estimated time when the part would be released. A week or so later I received the...
Read more
More
$151.53
- Compare At:
-
$181.84
- You Save:
-
$30.31
Genuine Whirlpool part
By: Whirlpool
Part Number: WPM0114003
This speed clip is a small retainer that slides over a panel edge to provide a captive thread for a screw. Replacing a worn or missing clip restores a tight, rattle-free hold on the attached component. What it does:
- Slides over a panel or bracket to create a captive thread for a mounting screw
- Maintains tension to resist vibration and loosening
- Helps when a screw spins or won't tighten due to a missing retainer
- Addresses loose, rattling, or misaligned panels or trim
What's included:
Install notes:
- Disconnect power and, if applicable, shut off water before servicing
- Note the original clip's location and orientation for correct fit
- Fully seat the clip on the edge; start the screw by hand to avoid cross-threading
- Do not overtighten; ensure the component is secure and noise-free
Do-It-Yourself Stories from Customers like You
Water was leaking & then freezing in the bottom of the freezer compartment Ronald S. • Frankfort , IL • December 30, 2014
Replaced the water tube that went from the plastic tubing to the ice cube tray. Found that even though it was the same exact length as the original, there was only an extremely small gap from the end of the tube to a splash board. This may have been the root cause of my problems.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPA3223101
This small insert slides into the end of plastic water tubing to reinforce it for a compression-style connection. It helps create a secure, leak-resistant seal at valves and couplings on appliance water lines.
- Supports the tubing wall so the ferrule and compression nut can tighten without collapsing the tube
- Helps prevent drips or seepage at the connection point
- Useful when the tubing end is cracked, deformed, or won't hold a tight seal
- Common symptoms include leaks at a fitting, a connection that won't stay tight, or restricted flow from a pinched tube end
What's included: 1 tube insert Install notes:
- Shut off the water supply and disconnect power before servicing
- Cut the tubing square; remove any damaged section and deburr the edge
- Slide the compression nut and ferrule onto the tube, fully seat the insert, then assemble the fitting—do not overtighten
- Restore water and check all connections for leaks
Do-It-Yourself Stories from Customers like You
Water was leaking & then freezing in the bottom of the freezer compartment Ronald S. • Frankfort , IL • December 30, 2014
Replaced the water tube that went from the plastic tubing to the ice cube tray. Found that even though it was the same exact length as the original, there was only an extremely small gap from the end of the tube to a splash board. This may have been the root cause of my problems.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP98165
This replacement screw secures panels, brackets, and components inside appliances. Replacing a missing or stripped fastener restores a snug, rattle-free fit using the correct #8-18 thread and 5/8-inch length.
- Fastens covers, trims, brackets, and internal parts to the cabinet/frame
- Used wherever a #8-18 x 5/8 screw is specified
- Replace if the original is missing, corroded, stripped, or will not tighten
- Symptoms: loose or rattling panels, gaps, or hardware that backs out
What's included: 1 screw (#8-18 x 5/8 in.) Installation notes:
- Disconnect power; shut off gas/water before servicing
- Match thread and length; start by hand to avoid cross-threading
- Use the correct driver bit and tighten snugly—do not overtighten
- Inspect and replace damaged clips or tabs before securing
Do-It-Yourself Stories from Customers like You
Missing parts Barry E. • Long Beach , WA • July 20, 2019
Replace
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12013211Q
This evaporator fan motor assembly circulates cold air across the evaporator coil and through the refrigerator and freezer. Replacing a failing motor restores steady airflow for consistent temperatures, faster cooling recovery, and quieter, reliable operation.
- Circulates air across the evaporator and through vents to cool both compartments
- Helps maintain even temperatures and proper defrost/airflow
- Replace if you notice weak or no airflow from vents and rising refrigerator temps
- Addresses noisy, intermittent, or non-running fan from the freezer area
- Can contribute to frost buildup on the evaporator cover when airflow is lost
What's included: Evaporator fan motor assembly Install notes:
- Disconnect power before service; use gloves to protect against sharp edges
- Access is typically behind the freezer's rear panel; remove shelves/bins as needed
- Note wire harness orientation; transfer any screws, grommets, or brackets from the original as required
- After reassembly, restore power and ensure smooth fan operation and airflow from vents
Do-It-Yourself Stories from Customers like You
The fan went bad it was no longer moving cold air from the freezer Gregory D. • Lancaster , PA • January 02, 2016
I removed both basket guides, removed the ice cube maker then removed the back wall panel, all only taking around 10 min. This gave me access to the fan, removed 2 more screws, disconnected 3 wires, all with connectors, then went in reverse to install new fan. 1/4" nut driver and a pair of needle nose pliers is all you need. The pliers are to remove the plastic wire keepers on the fan.
Read more
More
$203.44
- Compare At:
-
$244.13
- You Save:
-
$40.69
Genuine Whirlpool part
By: Whirlpool
Part Number: W10887190
This replacement light bulb restores clear, reliable illumination so you can see contents and monitor appliance operation. Replace a burned-out, dim, or flickering bulb to bring visibility back to the area it lights. What it does:
- Provides illumination in the appliance's interior or designated lighting location
- Makes it easier to see contents and check status at a glance
- Common symptoms: light won't turn on, intermittent/flickering light, dim or blackened bulb
What's included:
Install notes:
- Disconnect power before servicing; allow hot surfaces and the old bulb to cool completely
- Remove any lens/cover, then remove the old bulb
- Install the new bulb securely without overtightening; reinstall the lens/cover if present
- Restore power and test operation
Do-It-Yourself Stories from Customers like You
Lights burned out! M Dawn F. • Lafayette , LA • December 03, 2016
Let there be light! Easy change out and what a difference light makes! I had waited so long I got used to the fridge having only the top light and after changing out the bulbs -- well it is so good to see what is in the back of the fridge again! Just remove the plastic protector, easy as pie to do, and unscrew the bulbs and replace them!
Read more
More
$16.95
- Compare At:
-
$20.34
- You Save:
-
$3.39