Kenmore Refrigerator 596.78283804 (59678283804, 596 78283804) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12729128
Freezer icing up or fridge too warm? The defrost heater melts frost from evaporator coils to restore cooling. Typical DIY repair takes 20 minutes-2.5 hours.
Do-It-Yourself Stories from Customers like You
Refigerator not cold Robert B. • Parlin , NJ • July 10, 2016
Having never fixed a fridge before, I did a little research. The unit was not old & the cooling system was operating. Observing the frozen ice inside, I diagnosed it as the heat rod and/or it's thermostat as bad. I contacted ApplianceParts Pros, who assisted in confirming my theory. IMPORTANT NOTE: the sales advisor Joyce was truly an intelligent, knowledgable professional, NOT some "burger-order taker" usually encountered. This alone speaks VOLUMES. Subsequently, the parts arrived...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11260592
The Defrost Thermostat and Wiring Harness is an OEM part for Whirlpool refrigerators. This part ensures that the refrigerator's evaporator coils do not become overly frosty, thereby maintaining optimal air flow and cooling efficiency throughout the unit.
Causes for issues with the defrost thermostat and wiring harness often include electrical failures, such as short circuits or broken wires, wear and tear on the thermostat, or a malfunction that prevents it from accurately sensing temperature changes.
Symptoms of a malfunctioning Defrost Thermostat and Wiring Harness include:
- Excessive frost buildup on the evaporator coils
- The refrigerator or freezer compartment becoming too warm
- The refrigerator running continuously without cycling off
- Water leaking inside the refrigerator due to ice melting and not draining properly
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The refrigerator was warm, the freezer was working fine. The evaporator was iced over. Jimmy D. • East Hampton , CT • August 14, 2021
Replaced the defrost thermostat and heater and the refrigerator was working again.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11613295
Fix a noisy or non-cooling refrigerator with this condenser fan motor. Solves overheating compressor issues. DIY-friendly repair with video guide.
Do-It-Yourself Stories from Customers like You
Noisy bearings in condenser fan motor Glenn S. • Eagleville , PA • November 22, 2015
I bought the listed condenser fan motor for my Maytag refrigerator. Access to the condenser fan is by removing sheet metal screws of bottom panel with 1/4 in. nut driver. Condenser fan is on left side of rear access area. Remove electrical connector by pressing-in connector release tab with thumb fingernail and pulling on connector. Remove three mounting screws with 5/16 nut driver. Work fan out to the right past the compressor. I used a pair of pliers, as a lever, behind the plastic fan blades...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002497
Repair kit for refrigerator drawer slide mechanisms. Includes gears and rod to replace stripped, broken, or missing components in pull-out drawer rails.
Do-It-Yourself Stories from Customers like You
Gear on freezer pull out door broke Jon J. • Corry , PA • July 18, 2015
Pulled out storage bin Removed side track rail covers Popped off gear from holding clip Installed drive shaft Installed rail cover and storage bin
Only took about 15 minutes
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10436250
Creates an airtight seal around your freezer door to prevent warm air entry and cold air loss. Replace if torn, cracked, or not sealing properly. Verify fit by model number.
Do-It-Yourself Stories from Customers like You
Gasket not working Kim R. • Kilauea , HI • May 02, 2015
Ordered the new gasket from you - installed it and now my freezer is sealed
i called to order the correct replacement and they were the very best at helping me !!!!!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11197396
This kit includes end caps that attach to the ends of the drawer slide rails inside the refrigerator. They provide a finished appearance and help keep the slide rails properly secured in their mounting tracks. Replace these end caps if they are cracked, broken, or missing, which can cause drawers to slide unevenly or come off track.
Do-It-Yourself Stories from Customers like You
Broken hinge pin on right end cap Gerald P. • Lacey , WA • August 10, 2021
Although I only needed to replace the drawer support (end cap) on the right side the kit comes with replacements for both sides. I was surprised to see that the air flow adjustment mechanism that is located on the right side end cap was not included. I should mention that I did not disassemble the drawer mechanisms before ordering the end cap(s). The kit contained only the two molded end caps - no fasteners, mechanisms, or anything else. It turns out that this was all perfectly fine.
The...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 72017
Touch-up paint for covering scratches, chips, and minor blemishes on appliance exteriors. Restores appearance and protects surfaces when finish is damaged.
Do-It-Yourself Stories from Customers like You
Chipped paint Thomas S. • Middletown , DE • September 03, 2014
Touch up paint
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67006878
Replacement glass shelf that sits above the crisper drawers in your refrigerator. Replace if cracked, shattered, broken, or missing for a complete look.
Do-It-Yourself Stories from Customers like You
Crisper glass and toe plate Mary C. • Green River , WY • December 05, 2014
Very easy.Just set right in
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 350930
Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.
The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.
The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage.
Symptoms needing for Appliance Spray Paint include:
- Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
- A desire to refresh or update the appearance of the appliance without the need for complete replacement
- Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11658402
Extends and retracts freezer drawer in bottom-mount refrigerators. Replace if the spring broke, plastic tab cracked, or drawer won't close properly.
NOTE: This is a set of 2 slides.
Do-It-Yourself Stories from Customers like You
Drawer slide spring had broken needed to replace slide Sima H. • Great Neck , NY • November 23, 2016
There are videos on You Tube,. After removing the bottom basket, you remove the entire drawer including the door together with it, by using a screwdriver to depress the white clip on each drawer slide which releases the slide from body of the freezer.
Once you pull our the entire drawer, you will need to drill out a rivet to remove the old slide. You will need a rivet gun to attach the new slide.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10289489
The Door Shelf Bin is an OEM part for Whirlpool refrigerators. Positioned within the refrigerator door it provides organized storage for condiments, beverages, and other smaller items. This bin measures approximately 7.5” deep x 14” wide x 3.5” high.
Causes of a bad door shelf bin include normal wear and tear, overloading or misuse of the bin, or impact damage from dropped items.
Symptoms of a bad door shelf bin include:
- The bin cracking, breaking, or becoming dislodged from the door
- Items falling out of the bin easily
- Reduced storage capacity in the refrigerator door
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Unfrozen freezer Ivey P. • Porter , IN • August 24, 2015
I fixed my fridge freezer side by side, first by watching appliance parts pros video to see if i could fix it, second i purchsed the part again from APP, received within 2 days, followed video and now the freezer is frozen and the fridge is at 38 degrees and wonderful. Thanks again appliance parts pros for the great videos. I have used and repaired many items and saved a ton of service call money.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67005864
Humidity control slide for refrigerator crisper drawers. Replace this plastic slide if the lever tab has snapped off, cracked, or broken during use.
Do-It-Yourself Stories from Customers like You
The drip pan had basically disintegrated in the 6 years i've had the kitchenaid refrigerator Robert M. • Glenside , PA • November 06, 2015
Had to take the back cover off. It was very tight to remove the fan that sat in the drip pan but did get it off, was able to apply the same level of cursing and got the new pan installed, installing the drain tube was a breeze. Found the parts price very reasonable. Hoping the Whirlpool redesigned the pan so I won't have to do it ever again. I was surprised at how bad the quality of their original part was. Probably saved myself $150.00 on buying the part and doing it myself
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67006113
Threaded anchor that secures refrigerator door handles to the door panel. Replace if cracked, stripped, or missing to properly mount your handle hardware.
Do-It-Yourself Stories from Customers like You
Freezer door handle came off the set screw was strippped after viewing several blogs having a similar problem rather than fight the handle, I ordered a new one with set screws included new one Diane M. • Athens , GA • October 20, 2018
New mounting screws and handle. BTW, the parts have been redesigned to be more robust. Easy fix and the Refrigerator// Freezer look like new.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10141622
Adjustable leveling leg for refrigerators and freezers. Installs at base corner to stabilize appliance on uneven floors. Replace if broken or stripped.
Do-It-Yourself Stories from Customers like You
New refrigerator not level; store couldn't figure out what was wrong. Judith K. T. • Chico , CA • October 31, 2019
Purchased 2 replacement feet risers. A very awkward repait.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11291138
Refrigerator light won't turn on or off when opening the door? This door light switch controls interior lighting. DIY repair in under 10 minutes.
Do-It-Yourself Stories from Customers like You
Interior light on refrigerator was flashing Billy R. • Reedsport , OR • February 28, 2020
Replaced light switch. That did not work, problem was in led lights.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10371193
Replace your cracked, broken, or missing refrigerator door bin. This storage compartment installs on the refrigerator door for organized storage.
Do-It-Yourself Stories from Customers like You
Refrigerator for bins were cracked and the trim was breaking off freezer door handle was cracked in half held together with tape Katherine S. • Oregon City , OR • January 24, 2015
I ordered new bins, and a new handle. Handle was very easy to replace with the same two screws that were on the original. The bins were even more simple to replace.
Read more
More