Kenmore Refrigerator 596.79549012 (59679549012, 596 79549012) Parts

Water dispenser came down to a trickle and made a lot of noise, I changed the filter but it didnt help and thus the water tank/head assembly needed to be replaced. Replacing the water Tank/head assembly was an easy task, the hardest part is removing the covers and taking care of not breaking the insulation of the water inlet hose. For the not-so-experts like me it is also good to rememebr to have a bucket to collect all the water that comes out after the connection to the solenoid valves is... Read more

I went to appliancepartspros.com and described the symptoms which led to replacing the capacitor. The part arrived the next day!!! Unfortunately the clicking and warmness remained. I went to the online chat and Mandie recommended the relay which was next in the chain before the dreaded compressor. Once again the part arrived the next morning! I snapped it in and I was back in business, 90 dollars total in the two parts. No service call with the standard "it's the compressor" diagnosis. ... Read more

Almost ordered solenoid valve but realize ice maker was working ok and water dispenser worked good for the first 1-2 seconds. Read online forums and found some posting about replacement of filter head w/ reservoir tha ressembled the problem I was having. Ordered filter head and got part within 2 day (even with ground shipping request). Took about an hour to carefully figure out how to remove covers and install part. An easy way to determine if solenoid is ok is removing filter and installing... Read more

First, I had to replace a cracked roller so I could roll the frig out. I did this by tilting it slightly and shoving a shim underneath. I had to use two shims to get enough clearance for the wheel. I unscrewed the old wheel, screwed in the new one pretty easy, removed the shims and rolled it out. Then I unplugged the frig from the power socket, removed 6 screws from the back panel, and pulled out the old drain kit, which had become clogged with dirt and dust. I put in the new drain kit,... Read more

I ordered the replacement parts. They arrived after two business days in one box. Nothing was missing or damaged in transit. I knew how to replace the parts because this is an old refrigerator that I fixed in the past. Notes: - You will need a nut driver to open and close the screws because they have a hex head. - The new screws that I ordered according to the refrigerator's drawings on the AppliancePartsPros website were much longer than the existing screws. So I reused the old screws. Read more

I ordered new bins, and a new handle. Handle was very easy to replace with the same two screws that were on the original. The bins were even more simple to replace. Read more

A tree had fallen across our power lines and the resulting power surge fried the circuit board. The diagnosis was a bit difficult and involved an educated guess based on how the frig was acting. The display was dark unless a button was pressed and the inside light worked but that was all. I had to rule out the compressor as the root cause so I back fed power to the compressor and heard it and the condenser fan fire up. I ordered the board and found the only way I could get it overnight was to... Read more

The right door on our Jenn Air French Door Refrigerator would pop open & not fully close when the left door was closed first. Called the local distributor/dealer who advised me that the magnetic door gasket probably needed replacement (cost $300.00 + for the repair) What??? Visited you web site where I noted the right door had a "closure & bushing" on the bottom of the door. Could it be this was the problem fix? Took the right door off & examined both pieces. Sure enough the bushing was... Read more

Ordered new part, very easy to replace only took about 5 minutes to install new part and get everything going again. Part was a perfect fit and was shipped and received in only a few days. Thanks Read more

Replaced heating element and thawed out ice buildup. Read more

Replace Read more

The noise seemed to be caused by a vibration. The condenser fan motor seemed to have a vibration. I didn't need the fan blade as it came off in good condition. Read more

After trying to stop leaks with glue, i figured I should replace the drip pan, It took a little effort to get the fan out of the way but once that was taken care of the rest was simple. Putting the new pan in was very easy five minutes at most. The best part was the great delivery I got from appliance parts, and this is not a paid commercial. THANKS!!! Read more

Watched your video and replaced the switch Read more

I ordered the part from you which arrived much sooner than expected. I replaced the Rail-Mulln. It was so easy to fix, next time I'll let my wife do it. Read more

Replaced ice bin assy. Read more