Kenmore Dishwasher 665.14063K010 (66514063K010, 665 14063K010) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 350930
Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.
The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.
The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage.
Symptoms needing for Appliance Spray Paint include:
- Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
- A desire to refresh or update the appearance of the appliance without the need for complete replacement
- Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$24.95
- Compare At:
-
$29.94
- You Save:
-
$4.99
Genuine Whirlpool part
By: Whirlpool
Part Number: W10878507
Delivers water from supply line to dishwasher tub. Replace if cracked, leaking, chewed by rodents, or damaged during installation or moving.
Do-It-Yourself Stories from Customers like You
Jenn airJDB8000AWS3 dishwasher would not drain Lynden B. • Benicia , CA • December 17, 2019
Dishwasher washer would not drain after hearing glass-like particles during the drain cycle despite trying to clean the cylinder filter. Originally suspected the drain motor was damaged. After watching a video on how to replace the drain pump, I carefully energized the dishwasher (from water and electricity) then removed the dishwasher to take a look. After removal of drain hose from the pump, discovered that drain hose was connected to water inlet assembly which also needed removal to...
Read more
More
$52.95
- Compare At:
-
$63.01
- You Save:
-
$10.06
Genuine Whirlpool part
By: Whirlpool
Part Number: WP596669
The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.
Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.
Symptoms of a bad hose clamp include:
- Leaks at the hose connection points
- Hoses slipping off the connections
- Visible rust or damage on the clamp
- Reduced appliance efficiency due to leaks
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Will not stop filling with water
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
My washing machine smelt horrible Bryan W. • Ogdensburg , NY • August 20, 2018
First off I have to say that Appliance Parts Pro's saved me from hiring a repair person, and quite possibly just getting rid of my washing machine. Their video's helped out SOOOOOOOO much and the advice one of their agents gave me over their online chat helped me trouble shoot something when I got stuck. On top of this they shipped my parts fast enough that less than 12 hrs later they arrived, which allowed me to get my machine up and running way faster than the other options I had available....
Read more
More
$7.31
- Compare At:
-
$8.77
- You Save:
-
$1.46
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10250160
Secures the dishwasher upper rack to the slide rail and allows height adjustment. Replace if the clip is cracked, broken, or won't snap onto the positioner.
Do-It-Yourself Stories from Customers like You
Kitchenaid dishwasher top rack falling apart Gerald S. • York , PA • February 02, 2016
Ordered numerous replacement parts. Started with the tracks which required pulling the washer out of the cabinet to reach the screws. Pushed it back in and re-secured. Then stared on the rack and replaced the rack adjusters and various clips. Everything is straight forward and easy to replace. I originally called a local repair place to have them repair it. They came out and said they needed to order parts and they would call back. A week went by and I followed up with them. Had to leave...
Read more
More
$43.22
- Compare At:
-
$51.86
- You Save:
-
$8.64
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10195036
The Water Level Float is an OEM part for Whirlpool dishwashers. It helps regulate the water level within the dishwasher by rising with the water level and signaling the control board to shut off the water inlet valve when the appropriate level is reached.
Causes of a bad water level float can include wear and tear, mineral buildup or debris obstructing its movement, or damage due to mishandling. Over time, these issues can prevent the float from moving freely or accurately signaling the water level.
Symptoms of a bad water level float include:
- Dishwasher overfilling or underfilling
- Water leaks during the wash cycle
- The dishwasher not completing cycles correctly
- Error codes related to water level issues
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The dishwasher was leaking from the water level float David C. • Whippany , NJ • January 20, 2019
Ordered 6 parts from you thanks to your fantastic web schematic parts diagram received parts very fast changed parts easily and that leak stopped. Your company is a 5* operation hands down.
Read more
More
$51.46
- Compare At:
-
$61.24
- You Save:
-
$9.78
Genuine Whirlpool part
By: Whirlpool
Part Number: W10727422
Upper dish rack assembly for dishwashers. Holds glasses, cups, and small items on the top level. Replace if cracked, warped, rusted, or deteriorating.
Do-It-Yourself Stories from Customers like You
Rusty racks crumbling silverware basket obstructed discharge valve clogged mesh on the food grinder Yuriy M. • Mountain View , CA • May 15, 2015
Just replaced the things. Had to reuse old tine rows, rollers, the spray arm, etc., i.e. I removed 'em from the old racks and put on the new ones, but that was piece of cake. Also, I cleaned the food grinder and the discharge valve compartment (thank you very ???? ???? much, Internet), so spray arms around the top rack get enough water pressure now. I didn't have to buy any parts for the latter part of this little repair project, though.
Read more
More
$202.32
- Compare At:
-
$242.78
- You Save:
-
$40.46
Genuine Whirlpool part
By: Whirlpool
Part Number: W11763736
Replacement dishwasher panel that covers and protects internal components. Install to replace a dented, cracked, worn, or missing panel piece.
Do-It-Yourself Stories from Customers like You
Dishwasher was white and all of our other appliances were stainless steel Janet H. • Sarasota , FL • February 12, 2018
Ordered front panel and panel control. Also ordered name plate (did not need) front panel already has it. My husband and I had it switched out in approx 10 minutes. Took longer to gather proper tools than it did to do the repair. Looks awesome and original!
Read more
More
$23.63
- Compare At:
-
$26.25
- You Save:
-
$2.62
Genuine Whirlpool part
By: Whirlpool
Part Number: W10402110
Dishwasher won't turn on or has no power? This thermal fuse kit protects against overheating. Simple DIY fix takes about 20 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
No power on the dishwasher Jim C. • Burnet , TX • July 17, 2014
Checked online with app and figured out the most common cause of the problem after checking the most obvious causes. Ordered the fuse received on the second day. Installation was very simple and the dishwasher was again functional.
Read more
More
$35.60
- Compare At:
-
$42.01
- You Save:
-
$6.41
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10195037
Fix a dishwasher not filling with water by replacing the water level float lever. This lever regulates water levels and prevents leaks. Easy 15-minute DIY repair.
Do-It-Yourself Stories from Customers like You
The dishwasher was leaking from the water level float David C. • Whippany , NJ • January 20, 2019
Ordered 6 parts from you thanks to your fantastic web schematic parts diagram received parts very fast changed parts easily and that leak stopped. Your company is a 5* operation hands down.
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8269259
Seals the dishwasher air vent to prevent water leaks during operation. Replace if you notice dripping under the vent or wet insulation behind the panel.
Do-It-Yourself Stories from Customers like You
Kitchenaid dishwasher leaking on bottom left of door Neil D. • Centerbrook , CT • January 14, 2017
First tried replacing the seal around the door as that was the simple and most logical fix. Still leaked. Removed the front and upper panel to inspect. Found calcium deposit running down from under the Air Vent Assembly and wet behind the black stick-on insulation. Easy to trace the leak to the bottom of the door.
=> Ordered new Air Vent Assembly, gasket and Vent Deflector.
Parts arrived. Took 5 minutes to remove upper panel. Removed the two wires from the Air Vent Assembly. Inserted a...
Read more
More
$45.28
- Compare At:
-
$53.88
- You Save:
-
$8.60
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10505748
The Tub Wheel Assembly is an OEM part for Whirlpool dishwashers. It consists of the wheels and their mounting components that facilitate the smooth gliding of the dishwasher rack in and out of the unit. This assembly is critical for the operation of loading and unloading dishes, ensuring that the racks move smoothly without jamming or causing damage to the dishwasher interior.
Symptoms of a faulty tub wheel assembly include:
- Difficulty in sliding the dishwasher racks.
- Racks getting stuck or derailing during movement.
- Unusual noises when the racks are moved.
The primary causes of wear or damage to the tub wheel assembly can include regular use, excessive load on the racks, or accidental force applied when loading or unloading dishes. These can lead to broken wheels or dislodged fittings, necessitating replacement to maintain functionality.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Top rack rollers were worn Scott A. • Fort Worth , TX • August 03, 2014
Replaced rollers which were easy except i had to pull the dishwasher about half way out of the cabinet
Read more
More
$9.41
- Compare At:
-
$11.29
- You Save:
-
$1.88
Genuine Whirlpool part
By: Whirlpool
Part Number: W10873429
Bracket that secures the water level switch in your dishwasher. Replace if cracked, broken, or damaged, causing the switch to shift out of position.
Do-It-Yourself Stories from Customers like You
The dishwasher was leaking from the water level float David C. • Whippany , NJ • January 20, 2019
Ordered 6 parts from you thanks to your fantastic web schematic parts diagram received parts very fast changed parts easily and that leak stopped. Your company is a 5* operation hands down.
Read more
More
$26.74
- Compare At:
-
$31.82
- You Save:
-
$5.08
Genuine Whirlpool part
By: Whirlpool
Part Number: W11086533
The Insulation is an OEM part for Whirlpool dishwashers, specifically engineered to enhance the appliance's efficiency by reducing heat loss and minimizing noise. This insulation wraps around the dishwasher, acting as a barrier that keeps heat within the appliance during cycles and dampens the sound of its operation, making for a quieter kitchen environment.
Causes of a bad insulation part can include wear and tear over time, moisture damage leading to mold or mildew buildup, or physical damage from pests or mishandling during installation or repairs.
Symptoms of inadequate insulation include:
- Noticeable increase in the dishwasher's noise level
- Exterior surfaces of the dishwasher feeling warmer than usual
- Longer wash cycles due to inefficient temperature maintenance
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Jenn airJDB8000AWS3 dishwasher would not drain Lynden B. • Benicia , CA • December 17, 2019
Dishwasher washer would not drain after hearing glass-like particles during the drain cycle despite trying to clean the cylinder filter. Originally suspected the drain motor was damaged. After watching a video on how to replace the drain pump, I carefully energized the dishwasher (from water and electricity) then removed the dishwasher to take a look. After removal of drain hose from the pump, discovered that drain hose was connected to water inlet assembly which also needed removal to...
Read more
More
$27.77
- Compare At:
-
$33.05
- You Save:
-
$5.28
Genuine Whirlpool part
By: Whirlpool
Part Number: W10155344
The Diverter Motor is an OEM part for Whirlpool dishwashers. It controls the movement of the diverter disc, which directs water flow to different spray arms during the wash cycle. This ensures that all areas of the dishwasher receive adequate water pressure for effective cleaning.
Causes of a bad diverter motor can include electrical malfunctions, wear and tear from frequent use, or damage from water exposure. A faulty diverter motor can prevent the proper distribution of water, leading to poor cleaning performance.
Symptoms of a bad diverter motor include:
- Dishes not being cleaned properly
- Unusual noises coming from the dishwasher during operation
- The dishwasher not advancing through cycles correctly
- Water not reaching all areas of the dishwasher
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Note: Includes wire harness WPW10083167, Drain cap part number WPW10193605, and the shaft seal has been incorporated into sump housing, not available separately.
Do-It-Yourself Stories from Customers like You
Leaking from the bottom of the dishwasher Chuck H. • Rochester Hills , MI • October 17, 2015
Removed and replaced diverter motor. Ops check good, no more leaking. I'm guessing the seal was the problem but diverter ruined (water residue) from leaking over the last 5 years??? This seal is only available if you buy the tub so followed another review - removed diverter then gently pried out the seal, cleaned and then lubed with silicone grease. Also turned the seal 180 degrees or the opposite way before reinstalling the diverter and then wrapping it all back under the counter.
Read more
More
$97.49
- Compare At:
-
$116.01
- You Save:
-
$18.52
Genuine Whirlpool part
By: Whirlpool
Part Number: 8212560
Side mounting bracket kit secures your dishwasher to adjacent cabinetry. Replace missing, damaged, or broken brackets for stable installation.
Do-It-Yourself Stories from Customers like You
Dishwasher mounting two cabinets Franklin B. • Hoquiam , WA • December 16, 2017
I haven't yet started to place the dishwasher in place is
Read more
More
$27.77
- Compare At:
-
$32.77
- You Save:
-
$5.00
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10195038
The Nut is an OEM part for Whirlpool dishwashers. This nut secures the float switch, a key component in regulating the water level within the dishwasher. The float switch ensures your dishwasher does not overfill by triggering the water to stop once it reaches a certain level.
Over time and with regular use, the nut that holds the float switch in place can become loose or damaged. This could potentially allow water to seep through gaps, leading to leaks, or could cause the float switch to malfunction, affecting the dishwasher's ability to regulate water levels accurately.
Symptoms of a faulty Nut include:
- Water leaks from the base of the dishwasher
- The dishwasher overfills or underfills
- Unusual noises during operation
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The dishwasher was leaking from the water level float David C. • Whippany , NJ • January 20, 2019
Ordered 6 parts from you thanks to your fantastic web schematic parts diagram received parts very fast changed parts easily and that leak stopped. Your company is a 5* operation hands down.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13