Samsung Washer WA50T7455AV Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10501250
Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.
Do-It-Yourself Stories from Customers like You
Shift actuator Jesse M. • Nipomo , CA • October 04, 2025
With the video that was made from appliance pro.Help me out one hundred percent to understand what I was dealing with
Read more
More
$28.43
- Compare At:
-
$34.12
- You Save:
-
$5.69
Genuine Samsung part
By: Samsung
Part Number: DC97-15459G
Fix a washer that won't fill, overfills, or leaks water when off. This water inlet valve controls flow into the drum. DIY repair in 15-20 minutes.
Do-It-Yourself Stories from Customers like You
Error code nf not filling Gerald E. • Edmond , OK • June 20, 2016
Researched error code and symptoms on Internet. Disassembled washer back to get right part #, be careful they are different!
Googled part # for OEM part, found AppliancePartsPros with competitive pricing and fast delivery, placed order on Wednesday, had it on Friday for a few bucks more.
Got the part as expected, replaced, tested and success! No error code, fast wash cycle, happy better half!
Read more
More
$125.95
- Compare At:
-
$149.88
- You Save:
-
$23.93
Genuine Samsung part
By: Samsung
Part Number: DC31-00187A
Washer won't drain or draining slowly? A failed drain pump prevents water removal during cycles. Moderate DIY repair with video guide available.
Do-It-Yourself Stories from Customers like You
The washing machine wouldn't drain David H. • Ellicott City , MD • September 03, 2016
I opened the washer and replaced the pump. To open the washer:
1. Remove the 2 screws that are different from the others in the top back corners of the machine. That will let you remove the top.
2. Remove the soap tray and its holder. The tray comes out if you depress the tab in the back center. Its holder comes out if you remove the two screws in the front. You can leave all the hoses attached.
3. Remove the control panel. It snaps in. Undo the top snaps first. You'll have to reach...
Read more
More
$155.95
- Compare At:
-
$185.58
- You Save:
-
$29.63
Genuine Samsung part
By: Samsung
Part Number: DC97-19289F
Washer won't drain or shows ND error? This drain pump assembly fixes drainage failures and clears error codes. DIY-friendly, takes about 20 minutes.
Do-It-Yourself Stories from Customers like You
Nd error code on samsung aquajet vrt smartcare Sandra J. • Richmond , VA • September 12, 2015
I ordered the part (drain pump assy) from AppliancePartsPros.com and it was delivered to my house in 2 days. I called a friend to install it for me but....he never showed up. So I decided to do it myself. I watch the video that another Appliance Part customer suggested and it was extremely easy even for a seasoned woman as myself. It only took me about 20 minutes. Test load was perfect with no errors. This morning I'm on load 5 and still no issues. Thanks Appliance Parts hopefully I won't ever...
Read more
More
$107.38
- Compare At:
-
$126.71
- You Save:
-
$19.33
Genuine Samsung part
By: Samsung
Part Number: DC97-16931B
The Dryer Knob Encoder Assembly is an essential component for Samsung dryers, ensuring precise control of your appliance's settings. This genuine OEM part guarantees a perfect fit and reliable performance, allowing you to easily adjust drying cycles and temperatures with confidence. Crafted for durability, the Dryer Knob Encoder Assembly enhances the functionality of your dryer by accurately translating knob movements into electronic signals, resulting in consistent and efficient drying results. Installation is straightforward, making it a convenient solution for restoring your dryer's performance without the need for professional assistance. Whether your original encoder is worn out, unresponsive, or damaged, this Dryer Knob Encoder Assembly provides a seamless replacement that maintains the quality and efficiency of your Samsung dryer. Improve your drying experience with this dependable part, designed to keep your appliance running smoothly and extend its lifespan.
Do-It-Yourself Stories from Customers like You
The washer set button knob broke. Philip R. • Shiloh , IL • July 31, 2022
Ordered a new knob and took out little bits of the old one. Took the new knob and pressed it over the stump and presto works like new.
Read more
More
$71.95
- Compare At:
-
$84.90
- You Save:
-
$12.95
Genuine Samsung part
By: Samsung
Part Number: DC97-18610F
Suspension damper assembly that mounts inside your washer to absorb vibrations during operation. Replace if cracked, broken, or worn to restore stability.
More
$50.56
- Compare At:
-
$59.66
- You Save:
-
$9.10
Genuine Samsung part
By: Samsung
Part Number: DC34-00025E
Washer won't start or shows LO/DC error? Lid lock assembly secures the lid during cycles and signals the control board. DIY-friendly repair with video.
This part fixes the following symptoms
-
Door latch failure
-
Will not agitate
See more...
Do-It-Yourself Stories from Customers like You
Dc "spin" and lo "lid lock" error codes Matthew H. • Clarksville , TN • May 19, 2015
After watching the video it was strait forward. Just Pull the screws pop the lid swap the springs "grease them" and put it back together. I would suggest that you have a person help you mostly has a second pair of hands. The lid was over rear springs and it will save you some expletives to have the extra body. I had worn out springs and the load kept becoming unbalanced during spin cycles I just happened to coincide with the Lock mechanism failing. The motor drive for the lock stopped working....
Read more
More
$164.47
- Compare At:
-
$195.72
- You Save:
-
$31.25
Genuine Samsung part
By: Samsung
Part Number: DC61-01722B
Adjustable leveling leg installs on the bottom of your washer. Replace if broken, cracked, or snapped off. Allows height adjustment for stability.
Do-It-Yourself Stories from Customers like You
Broken washer leg Larry C. • Cape Girardeau , MO • October 05, 2016
Ordered a new leg from Appliance Parts & put it on.
Read more
More
$13.95
- Compare At:
-
$16.60
- You Save:
-
$2.65
Genuine Samsung part
By: Samsung
Part Number: DC90-10128N
Fix tE error codes with a new water temperature thermistor. This sensor monitors wash water temp. DIY-friendly repair takes under 10 minutes.
Do-It-Yourself Stories from Customers like You
Te code error Michael H. • Blue Springs , MO • August 08, 2014
I first check the schematics to find the heat sensor. On my model it's c on the control panel. I checked the continuity on the orange and white wires. It showed some continuity but not much. I then went to the heater element and found the orange and white wires going to the thermistor. Turns out the heater element and thermistor need repalced.
Read more
More
$48.95
- Compare At:
-
$57.76
- You Save:
-
$8.81
Genuine Samsung part
By: Samsung
Part Number: DC62-00328A
Washer not draining or water backing up? This check valve regulates water flow and prevents backflow. DIY repair with video guide included.
Do-It-Yourself Stories from Customers like You
Poor location of drain pump Michael D. • Lower Burrell , PA • March 11, 2016
First of all, I cannot believe that Samsung would actually think that putting the drain pump on the drum was a GOOD idea.
The fix was easy, When I bought the washer off an individual, She told me that she was informed the drain pump needed replaced. So I did that. Pain in the a&* du to the location and trying to secure the bolts. It broke off after a week. I found out that Samsung put out a repair bulletin and a customer service rep from this site emailed it to me. After looking up the parts,...
Read more
More
$65.20
- Compare At:
-
$71.72
- You Save:
-
$6.52
Genuine Samsung part
By: Samsung
Part Number: DC96-01703H
Fix washer overfilling or not filling properly. This water level pressure switch regulates water in the tub. Easy DIY repair for OC error codes.
This part fixes the following symptoms
-
Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You
No code, just over filling. Jim B. • New Kensington , PA • December 10, 2021
Replaced water level sensor on washing machine.
Read more
More
$81.95
- Compare At:
-
$97.52
- You Save:
-
$15.57
Genuine Samsung part
By: Samsung
Part Number: DC66-00887B
Replacement pulsator cap for top-load washers. Covers the center agitator mechanism. Order a new cap if yours is cracked, broken, or missing.
More
$60.95
- Compare At:
-
$73.14
- You Save:
-
$12.19
Genuine Samsung part
By: Samsung
Part Number: DC60-40133A
Replace a bent or missing pulsator bolt that prevents proper agitator assembly. This washer bolt secures the pulsator mechanism for smooth operation.
Do-It-Yourself Stories from Customers like You
Pulsator needed to be replaced Ondean S. • East Hartford , CT • December 21, 2019
Ordered a new part and installed
Read more
More
$10.36
- Compare At:
-
$11.84
- You Save:
-
$1.48
Genuine Samsung part
By: Samsung
Part Number: 6002-000213
The Refrigerator Screw-Tapping is an essential component for maintaining your Samsung refrigerator's functionality. This genuine OEM part ensures precise threading, allowing screws to be securely fastened without damaging the surrounding materials. Designed specifically for Samsung refrigerators, it guarantees a perfect fit and reliable performance. Whether you are replacing a damaged screw-tapping or performing a repair, this Refrigerator Screw-Tapping simplifies the process, saving you time and effort. Its high-quality construction provides durability and long-lasting support for your appliance. By choosing the Refrigerator Screw-Tapping , you ensure your refrigerator remains sturdy and functional, enhancing its overall lifespan. This genuine OEM part is easy to install and seamlessly integrates with your existing setup, making it an ideal choice for DIY repairs. Trust in the quality and compatibility of this Samsung part to keep your refrigerator operating smoothly and efficiently.
Do-It-Yourself Stories from Customers like You
Dryer would not start. John K. • Lawrenceville , GA • November 03, 2017
The start button had been tricky to use. You had to push it in just a certain way to get the dryer to start. Eventually it was non-responsive. All other controls worked and there was no error code displayed. The repair was to replace the whole control board which cost around $100. Heavy sigh..
Be sure to keep track of all your screws.
BTW it was not the thermal fuse. All the online videos say this is the first thing to look for when the dryer will not start. Be sure to check with the person...
Read more
More
$6.41
- Compare At:
-
$7.56
- You Save:
-
$1.15
Genuine Samsung part
By: Samsung
Part Number: 6021-001573
The Hexagon Nut for Washer is an essential component designed to ensure the stability and proper functioning of your Samsung washing machine. Crafted with precision, this genuine OEM part guarantees a perfect fit and reliable performance, just like the original component. Its durable construction provides strength and longevity, helping to maintain the integrity of your washerGÇÖs assembly. Installing this hexagon nut is straightforward, allowing for easy DIY repairs that save you time and money. By replacing worn or damaged nuts with this high-quality part, you can restore your washer to optimal working condition, minimizing the risk of leaks or mechanical issues. Compatible with a wide range of Samsung washer models, the Hexagon Nut for Washer offers assurance and peace of mind for your appliance maintenance needs. Trust in this genuine OEM part to deliver the functionality and durability required to keep your washing machine running smoothly.
Do-It-Yourself Stories from Customers like You
Wrong nut listed for this washing machine! Samsung washing machine had to remove tub from clutch/motor and ruin nut holding tub to clutch Timothy M. • Louisville , KY • October 06, 2018
For Samsung Washing clothes machine WA50F9A7DSP/A2
The large (about 1 inch) nut at the bottom of the tub that holds the tub onto the clutch/motor is NOT Appliance Parts Pros 6021-001573, described as NUT-HEXAGON M26 OD44 ZNDC1. This nut has a 24 mm internal diameter. It is marked ZNDC-1 MT26 70H on top of the nut and is left hand or reverse thread. It is slightly too small to thread onto the clutch shaft.
THE CORRECT NUT has a 26 mm internal diameter. That is Appliance Parts Pros...
Read more
More
$60.95
- Compare At:
-
$73.14
- You Save:
-
$12.19
Genuine Samsung part
By: Samsung
Part Number: DC61-03385A
Fix a washer that won't drain or is leaking water with this drain pump body assembly. Resolves NF error codes and flooding issues. Video guide included.
Do-It-Yourself Stories from Customers like You
Poor location of drain pump Michael D. • Lower Burrell , PA • March 11, 2016
First of all, I cannot believe that Samsung would actually think that putting the drain pump on the drum was a GOOD idea.
The fix was easy, When I bought the washer off an individual, She told me that she was informed the drain pump needed replaced. So I did that. Pain in the a&* du to the location and trying to secure the bolts. It broke off after a week. I found out that Samsung put out a repair bulletin and a customer service rep from this site emailed it to me. After looking up the parts,...
Read more
More
$28.39
- Compare At:
-
$30.34
- You Save:
-
$1.95