Poulan Ignition Controls

An ignition module works in conjunction with the flywheel to create an electric current. It sends the voltage to the spark plug at a precise time to ignite the fuel and air mixture in the cylinder. An ignition module does not have moving components, but exposure to heat can cause damage over time. There are several warning signs that the ignition module has failed. The most common ignition module related problem is engine sputtering. If the damage is severe, it may cause total engine start failure. This is an original Husqvarna ignition module replacement. This part is compatible with string trimmers, pole pruners, hedge trimmers, and leaf blowers from Craftsman, Poulan Pro, Weed Eater, and Poulan. It is sold individually. Other components are not included in this ignition module replacement.

This is an authentic OEM replacement ignition module built specifically for Husqvarna lawn appliances. An ignition module, also known as an armature-magneto, is an essential part of a combustion engine's ignition. The ignition module creates pulses of high voltage electricity that the spark plug uses to generate a charge and start the ignition. Without a functional ignition module, the spark plugs and ignition will not engage. The most common reason for an ignition module to break is if the spark plugs have gone bad or are missing from the ignition. The charge generated by an ignition module is quite high, so if the spark plugs are not in place to receive the charge, the high voltage can fry and melt the module. If the spark plugs are not receiving a spark but can carry a charge, the odds are that the ignition module has been fried and will need to be replaced. To make this repair, use a wrench set and screwdriver. Although this high-quality replacement part is designed specifically for Husqvarna appliances, it may also work with some Jonsered appliances, too. It comes sourced from the original manufacturer and does not include any additional hardware.

This is a genuine replacement ignition module for select Husqvarna lawn and garden equipment engines. The ignition module, also known as the armature-magneto, creates high voltage power in pulses, which then passes on to the spark plugs and allows them to create the spark to fire the engine. This part consists of the ignition coil and the spark plug boot, which is made with durable rubber and insulated metal. When the various components fail, the engine may not get the spark that it needs to turn over because the spark plug is not getting the power. A replacement will get the equipment running again. This OEM replacement part is designed for use on gas-powered blowers and string trimmers, including select models from Husqvarna, Poulan, Weed Eater, and Jonsered. The ignition module comes as a complete part and includes the boot assembly and coil, so no additional purchases will be required. Hardware is not included, however, and will need to be bought separately when it is needed. This unit is sold individually. The engine should be cool before doing any repairs and gloves should always be worn to protect the hands during engine repairs and parts replacements.

This is a genuine ignition module for Husqvarna engines on select outdoor lawn equipment. The ignition module includes the ignition coil and spark plug connector in a single piece. This module is used to transfer the electric charges from the flywheel magnets. This ignites the fuel-air mixture in the cylinder and creates the combustion that powers the engine. Over time, the ignition module can become worn or the spark plug connector can snap off or get damaged, causing a need for replacement. Without a properly functioning ignition module, the engine will not be able to start. This OEM ignition module is manufactured to exact standards for use in Poulan and Husqvarna string trimmers. It is a replacement for the original part and is sold as an individual unit. The spark plug and other parts and hardware will require an additional purchase. To replace this part, allow the engine to cool and disconnect the old ignition module from the spark plug. Then, detach the other side of the module and replace it with the new part. Reconnect the spark plug and the job is done. Be sure to allow the engine to cool and wear gloves when performing this repair.

This genuine replacement ignition module is part of the starting system in select models of gas string trimmer/edger units. It connects the spark plug to the engine and supplies the electric current to generate the spark for ignition. In the event that the module wears out or becomes defective, the engine may fail to start. With a faulty ignition module, it will be difficult to operate equipment if it works at all, which is why an immediate replacement with an OEM part like this is necessary. This genuine OEM ignition module is manufactured by Husqvarna and compatible with select trimmers from Poulan, Weed Eater, and Husqvarna. This unit includes the ignition module, the rubberized wire, and the spark plug boot or cap. Hardware and other components are not included. It may be a good idea to replace the spark plug when replacing the ignition module if it has not been replaced recently. Be sure to wear gloves and allow the engine to cool before doing any repairs on the ignition or other engine components. Be sure to disconnect the power supply before beginning any repairs for safety, as well.

Lawn tractors typically have keys, which can provide an added measure of security and protection over push-button or pull-start machines. This is a replacement molded ignition key for use with lawn tractors. The key ensures that only those who have the key can use the mower, which reduces the risk of unauthorized users. The key is made of metal and plastic. Many lawn tractor owners will want to have a replacement key for their mower, even if their current key is still operable. There is always the risk of losing the key and having an extra ensures that the owner can continue to use the machine even if they lost one of the keys. Some choose to buy several keys to have one or two extra on hand. This is a genuine OEM replacement molded ignition key from the manufacturer. It is sold individually and is compatible with more than 150 models of lawn tractor. Brands that are compatible with the key include Craftsman and Husqvarna.

This replacement part is a key. It is a genuine replacement part made by Husqvarna. This key is intended to start and stop different types of machinery, typically a lawnmower. Without this key, the user might not be able to use the lawnmower at all. A new key might be needed if the current one is missing or damaged. This could mean that the key does not fit in the slot anymore or the previous key might be lodged in place. This is not unusual after years of use. It is recommended that the user refers to the owner's manual before attempting to replace this key. This should be a simple repair if the previous key is not stuck in place. This is also a genuine OEM replacement part to ensure proper fit and long-lasting use. Note that part is sold individually and is sourced directly from the manufacturer.

This genuine OEM replacement ignition module is a type of electric switch used to send signals to the ignition cable and create a spark to fire up the engine in a gas-powered chainsaw. When the ignition coil creates a high-voltage charge, it triggers the spark plugs to create a spark and ignite some fuel so the engine will start. The ignition is usually one of the first things to check if an appliance's engine does not start, after checking for fuel and then the spark plugs. If the spark plugs are fine, though, the problem is likely to do with another part of ignition, namely the ignition module. As it is located near a high-voltage region of the ignition, the switch can fry and will need to be replaced. Using a pair of pliers, a screwdriver, and a wrench set, switch out the faulty ignition module and test the engine to see if it starts. This replacement ignition module is compatible with Craftsman chainsaws and does not include any addition hardware. As a high-quality part, it comes sourced directly from the original manufacturer.