Poulan Starter

When you pull the starter rope, it will engage the chainsaw starter pulley, which then makes the flywheel engage and causes the engine to fire up. The assembly consists of a few small working parts that can wear out or become damaged or lost over time. The included spring may wear or you may lose one of the screws that secure it in place. This OEM kit makes it easy to replace the entire assembly with an exact fit for compatible models. When installing this starter pulley kit, remove or disconnect the spark plug for your safety. This genuine OEM chainsaw starter pulley kit is designed for use with a variety of chainsaws that are manufactured by brands like Husqvarna, Craftsman, and Poulan. Check your user manual to confirm part number compatibility for an exact fit. This starter pulley kit is sold individually and comes with everything that you need for a quick and easy replacement.

This starter pulley kit is designed for use on string trimmers. It is made to spin the flywheel so the engine will start up when the starter rope is pulled. Sometimes, the teeth on the starter pulley can wear out with extended use. This can result in teeth that do not contact the pawls on the flywheel. In some cases, the pulley will also wear in the area where the recoil spring attaches. If the string trimmer's engine isn't starting, has trouble starting, or has a pull rope that won't retract, a starter pulley kit offers the replacement parts needed. Before the replacement of the part is done, the engine should be cool to the touch. The wire and boot should also be removed from the spark plug before replacement to prevent starting the engine. This is a genuine OEM component that comes directly from the manufacturer. It's designed for use on gas-powered string trimmers by Husqvarna, Craftsman, and Poulan. It is made of hard plastic and steel and comes with the recoil spring, drive pulley, rewind pulley, and drive spring. This is sold as an individual kit.

This is a starter solenoid used in a variety of riding lawn mowers and yard tractors. Unlike most push mowers that are started by pulling a rope and firing a magneto, riding mowers have starters and batteries. The solenoid is the link between the battery and starter. When the ignition key is turned, electricity from the starter flows through the solenoid to the mower's ignition, firing the engine. Because it is the part subjected to abrupt electrical charges, over time the solenoid's internal workings may fail and the device must be replaced. A symptom of a bad solenoid is the if the engine fails to turn over. To make sure the problem is not the battery, turn the ignition switch on and use a screwdriver to simultaneously touch both terminals of the solenoid. If the engine turns over, the solenoid must be replaced. The solenoid sits inside the engine housing by the starter motor. Before starting to replace it, disconnect the positive battery cable. Replacing this device is as simple as disconnecting the wires that attach it to the battery and unbolting it from the engine housing. This solenoid is a genuine OEM replacement part that is manufactured to be an exact replacement for the original part. This solenoid is compatible with Poulan, Husqvarna, Craftsman, and Weed Eater equipment.

The starter spring is what is used to create the recoil to start the engine on pull-start chainsaws, blowers, trimmers, and other lawn equipment. When the starter handle is pulled, the rope extends and pulls on the spring, causing it to tighten and then release, which creates the action to fire the motor. It may also be called the recoil spring, rewind spring, or return spring, but they all refer to the starter spring. Over time, this can become worn with use, and in some situations, it can even break completely. If the starter rope will not rewind into the housing, the spring may be twisted and need to be replaced. If so, this genuine OEM starter spring will do the job for compatible machines. This model is manufactured by Husqvarna and compatible with various Poulan and Husqvarna lawn equipment. This spring may serve as a replacement for many machines including blowers, hedge trimmers, grass trimmers, chain saws, and saws. Check the user manual for compatibility and fit, as well as part numbers. Be sure to install this according to all instructions and diagrams for safe and proper operation.

The starter pawl bridge provides the resistance for the starter rope that is required to fire the engine. The bridge connects to the flywheel and is responsible for making it spin when the starter rope is pulled. Over time, the pawl can become worn with use. In the event that other starter components go bad, those can also damage the pawl. If the flywheel does not engage, it may be a faulty pawl. Always use gloves when replacing engine components and be certain to disconnect the spark plug before working on any engine parts. This OEM starter pawl bridge is manufactured to exact standards and is made by Husqvarna. It is compatible with select Husqvarna and Jonsered trimmers. This durable replacement part is made of metal and sold individually.

This recoil starter spring is what retracts the rope back into the main starter assembly. When the rope is pulled, the spring expands. The release of the rope triggers a retraction, which pulls the rope in and activates the starter, creating the chain reaction that starts the engine. This spring can get twisted or become hyperextended with regular use, in which case the only solution would be to replace the entire spring assembly. This OEM recoil starter spring is manufactured by Husqvarna, with high-quality standards in mind. It is compatible with Poulan, Weed Eater, and Husqvarna machines, including trimmers, leaf blowers, edgers, and pruners. Owners should always consult their parts diagram or owner’s manual for exact part number compatibility. This durable metal spring is designed from high-quality materials and is sold individually. The starter rope and other parts of the assembly are sold separately. Always disconnect the spark plug and wear gloves when performing engine work.

This replacement starter spring is a genuine OEM model from Husqvarna. The starter spring, also sometimes called the recoil spring or recoil starter spring, is part of the entire starter assembly. It attaches to the fan and flywheel housing and is responsible for helping to retract the starter rope when it is pulled to engage the engine. Over time, the spring can wear out or become twisted. This can cause the starter rope to no longer retract or it can even seize up the entire starter assembly. Replacement of the spring is the only option and this OEM part can provide an exact fit for select engines. This part is designed for use with blowers, edgers, trimmers, and pruners that feature Husqvarna engines and that are manufactured by brands like Weed Eater, Poulan, and Husqvarna themselves. The starter spring is made of durable metal and is sold individually. Always disengage the spark plug and allow the engine to cool completely before beginning and repair projects, and protect the hands by wearing gloves.

This black starter handle is used for a range of handheld lawn and garden tools. The handle is the part that connects to the starter rope. When the handle is pulled, the started rope will rotate the clutch assembly and start the engine. Although the handle is simple, it is an essential part of the machine and helps to make starting it possible.The handle is made from plastic. It can become damaged and cracked over time and from repeated use, necessitating replacement. If the starter handle is broken, it will be difficult and in some cases impossible to start the machine. Even small cracks in the handle mean it should be replaced. A damaged starter handle could also be dangerous if it breaks while trying to start the machine.The starter handle will work with certain models of trimmers, pruners, and blowers from Husqvarna, Weed Eater, and Poulan. This OEM replacement starter handle is sourced from the manufacturer and is sold individually.

This genuine Echo starter handle can be used as a replacement part for chainsaws, leaf blowers, leaf vacuums, and string trimmers. The function of a starter handle for one of these types of small engine appliances is to use in conjunction with a starter cord to power up the engine. It is meant for walk-behind appliances that are powered up by recoil starters.A starter handle might need to be replaced if it can no longer turn on the engine in conjunction with the starter rope. If the rope has permanently detached from the starter handle in a way that cannot be simply repaired or if parts of the handle have been damaged or have fallen off, the starter handle must be replaced with this genuine OEM part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This starter handle is compatible with the following brands: Husqvarna, Poulan, Weed Eater, and Paramount.

This replacement part is a starter pulley. It is a genuine replacement part made by Husqvarna. These types of pulleys are commonly responsible for making sure that two different parts are working together. These two parts usually require a rotating or turning motion. The pulley is situated so that they are able to work together when the appliance is in use to help operate the engine.A new starter pulley might be needed if the turning or rotating motion inside the engine is not working properly. This can be because the pulley is broken or damaged in some way and not able to provide the motion for linkage of the parts. Because this part is situated near the engine, be sure the appliance is cooled off before attempting this repair.This pulley is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer.

This is a starter pulley that is used with various types of string trimmers from major manufacturers.The pulley keeps the starter rope in the right location so that the chainsaw comes on and offers cutting power. Through wear and tear or impact, the starter pulley can break or become damaged.If a user pulls the starter rope and the engine does not start, the starter pulley may not be working correctly. It will need to be replaced. Before the replacement is made, make sure the tool is turned off and the spark plug wire is disconnected. The starter pulley and rope can be reached by disassembling the trimmer. The recoil spring should be rewound before the rope is threaded back in.This starter pulley is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The component is made for use with string trimmers manufactured by Turf King, Craftsman, Paramount, Weed Eater, Poulan, and Poulan Pro.

This rewind spring is a genuine Husqvarna part, sold individually. This rewind spring can be used as a replacement part in a string trimmer or an edger. The rewind spring maintains the placement of the pulley in the pull start assembly, allowing the rope to power the appliance.The rewind spring could be dented, punctured, warped, eroded, cracked, chipped, or otherwise damaged to the point of reduced functionality or negated functionality, in which case the rewind spring should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This rewind spring is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This is a starter hub replacement designed for use in select models of lawn and garden equipment. The starter hub is part of the starter system. The starter pulley will engage the hub, which will then engage the flywheel to start the motor. The hub is subject to constant repetitive motion and rotation, so it can often become worn or damaged over time. Without a functional starter hub, the engine will not be able to operate safely, which is why an OEM replacement is essential.It is important to wear gloves when performing engine repairs. In order to replace the starter hub, the old part will need to be removed from the starter assembly. Then, the new hub can be put in place and connected to the flywheel and the starter pulley. Be sure to disconnect the power supply before performing any engine repairs.This genuine OEM starter hub that is manufactured by Poulan. It is designed for use with select models of chainsaws. The hub is sold as an individual replacement part. There is no hardware included and other parts will require an additional purchase.

This starter pawl is a genuine Husqvarna part, sold individually. This starter pawl can be used as a replacement part in a leaf blower. The purpose of the starter pawl in a leaf blower is to function within the mechanism of the pull-start system so that the spring expands and contracts the starter pawl in order to release and coil back the starter rope that powers on the small engine of the leaf blower.If the starter pawl is dented, cracked, chipped, warped, or eroded to the point of reduced efficacy, the starter pawl should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This starter pawl is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.

This part is a replacement recoil starter assembly. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective recoil starter assembly in hedge trimmers.The recoil starter assembly helps the engine to start up by spinning the crankshaft when the user pulls the rope. This part is critical, and if it is faulty in any way, the trimmer may not be able to start. Thus, when damaged, this part should be immediately replaced. When working on or near an engine it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this recoil starter assembly, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This recoil starter assembly can be used with different models of hedge trimmers that have been manufactured by Husqvarna, Poulan, and other brands. Part sold individually.

This starter spring is a genuine OEM replacement part for chainsaws that operate using a starter rope. When an operator pulls the starter rope out, there is a pulley around which the rope then has to recoil. The starter spring maintains tension in the pulley so that the rope will naturally recoil. The starter spring also provides enough tension to prevent the operator from yanking the rope all the way out of the assembly. Through repeated use, and especially if an operator is rough on their appliance, the starter spring can loosen up and will no longer work as effectively. When this happens, the starter pulley will not recoil and the starter rope will hang loose from the appliance. Fortunately, switching out the starter spring is an easy repair that should only require a wrench and a pair of pliers. Be careful when pulling the old spring out. Although it isn't as tense as it once was, it still has the potential to snap back. This replacement starter spring is a high-quality part for Husqvarna, Poulan, and Weed Eater appliances, and as such, it is sourced from its original manufacturer. This part does not ship with any additional hardware.