Parts for Bosch SHE9PT55UC/98: Pump Parts

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Fix dishwasher not filling with water or leaking at the water entry point. This inlet ensures proper water flow and prevents leaks where water enters.

The Cover is an OEM part for Bosch dishwashers. It serves as a protective barrier over vulnerable inner components. The cover helps prevent damage from spills, shields electronics from moisture, and blocks access to moving parts for safety.

Causes of a bad cover can be normal wear and tear, repeated impact damage, or improper handling during repairs.

Symptoms of a bad cover include:

• Cracks, holes or other physical damage
• Warping or deformation over time
• Loose or improper fit that exposes internal parts

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Thread Bolt is an OEM part for Bosch dishwashers. It serves as a fastening component, securing the water inlet in place and ensuring a proper water supply connection.

Causes of a malfunctioning Thread Bolt can include cross-threading or over-tightening during installation, leading to stripping or damage.  

Symptoms of a bad Thread Bolt include:

• Leaks around the water inlet area Loose or rattling water inlet valve 
• Difficulty in accessing or removing the valve assembly 

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Fix E4 water flow errors in your dishwasher with this flow meter sensor. Monitors water volume to ensure proper fill levels during wash cycles.

Reduces hard-water minerals to prevent spotting and buildup on dishes and glassware. Replace when dishes show mineral deposits. Verify fit by model number.

This is a sensor that detects the level or presence of rinse aid in the dishwasher's dispenser system. It communicates with the control board to ensure the correct amount of rinse aid is dispensed during the wash cycle for spot-free drying. Replace this sensor if your dishwasher displays a rinse-aid error, fails to dispense rinse aid, or consistently leaves spots and film on dishes despite a full rinse-aid reservoir.

Replace your dishwasher door gasket when leaks appear or the seal feels hard and cracked. Restores watertight sealing. Confirm fit with your model number.

This is a small rubber seal that fits on the water softener cap inside the dishwasher, creating a watertight barrier to prevent leaks. It ensures the water softener compartment remains properly sealed during wash cycles. Replace this seal if you notice water leaking from the softener cap area or if the rubber has become worn, cracked, or no longer provides a tight fit.

Secures threaded connections in your dishwasher to keep components tight and stable. Replace if cracked, stripped, or broken to restore proper fastening.

Replace your dishwasher's detergent dispenser lid if it's cracked, broken, or missing. This cover snaps onto the dispenser to keep detergent secure.

Fix cloudy dishes and hard water spots with this water softener regeneration valve. Restores proper brine flow during recharge cycles for cleaner dishes.

Dishwasher leaking from the bottom or won't drain? The sump assembly collects and channels water to the pump. Moderate DIY repair with video guide.

Water backing up into your dishwasher tub after draining? The check valve prevents dirty drain water from flowing back in. Moderate DIY repair.

Secures the dishwasher sump or sump cover to the tub for a tight, leak-resistant seal. Replace if missing, stripped, or damaged to restore stability.

Seals the sump area to prevent leaks and ensure proper water circulation and drainage. Replace if cracked, warped, or missing. Verify fit with your model.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

This is a lid that covers the drain pump housing inside the dishwasher sump area. It seals the drain pump to ensure proper water flow during the drain cycle. Replace this lid if it is cracked, warped, or missing, which can cause water leaks, poor draining, or unusual noises during operation.

The Turbidity Sensor is an OEM part for Bosch dishwashers. It is a component located inside the dishwasher that plays a key role in monitoring water quality during each wash cycle. The turbidity sensor detects small food particles and residue in the water, relaying this information to adjust water temperatures, spray pressures, and cycle times accordingly to achieve optimal cleaning results.

Causes of failure could be normal wear and tear over time, mineral buildup affecting the sensor's ability to read water quality accurately, or damage from electrical faults.

Symptoms of a bad turbidity sensor include:

• Inconsistent or inadequate cleaning performance
• Extended cycle times
• Error codes displayed related to water issues

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Sump to Water Inlet Hose is an OEM replacement part for Bosch dishwashers. This hose provides a pathway connecting the dishwasher's sump and water inlet valve. It allows the sump to fill with water during different dishwashing cycles, facilitating key functions like rinsing, spraying cycles, and final rinses. Proper connection between these components via this hose is required for the dishwasher to operate efficiently. 

Causes of a faulty sump to water inlet hose include cracking, leaking, or kinking over repeated use and cycles. Hoses can become damaged due to pinching in the dishwasher or exposure to high water pressures over time.

Symptoms of a bad sump to water inlet hose include: 

• Incomplete filling of the sump during the cycle
• Erratic water pressure 
• Leaks from the hose connection points
• Loud knocking sounds from within the dishwasher 

This replacement part is also compatible with some Thermador, Gaggenau, and Kenmore models.

Replacement dishwasher seal creates a watertight connection between components. Replace when leaks or pooling occur. Verify fit with your model number.

Fixes poor cleaning from weak spray arm pressure. This water distributor routes water to spray arms for proper wash circulation. DIY install in 30-45 min.

The Divertor Motor is an OEM part for Bosch dishwashers.  This part controls the direction of water flow within the unit. This motor directs the water to different spray arms based on the selected wash cycle, ensuring efficient cleaning by optimizing water usage and spray intensity. 

Causes of damage to the divertor motor can include regular wear and tear, exposure to water and detergent over time, and electrical issues such as wiring problems or faults in the control board.

Symptoms of a failing Divertor Motor include:

• Inadequate water distribution during cycles, which can lead to uneven cleaning results.
• The dishwasher making unusual noises, such as humming or grinding, which may indicate a struggle in the motor function.
• Certain wash zones receiving little to no water, affecting the appliance's overall performance.
• Error codes displayed on the dishwasher panel that relate to water circulation problems.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This is a combined circulation pump and heating element assembly that pumps water through the spray arms and heats it during the wash and rinse cycles. It ensures water reaches the proper temperature for effective cleaning and drying. Replace this part if the dishwasher is not cleaning dishes properly, water is not circulating, dishes come out cold, or if diagnostic codes indicate a pump or heater failure.

Secures the hose between pump and heater in your dishwasher. Replace if loose, damaged, or causing leaks. Confirm fit with your model number.

Does your dishwasher shake or make loud noises during the wash cycle? A worn suspension damper may be the cause. This part absorbs vibration and stabilizes the tub.

Dishwasher won't drain or shows E24/E25 error? The drain pump removes water after wash cycles. Moderate DIY repair with video guide available.

The Funnel is an OEM part for Bosch dishwashers. It helps accurately guide water from the inlet valve onto wash arms and other components inside the dishwasher.

As water flows through the funnel during each cycle, small debris particles can become trapped. Over time, a buildup of mineral deposits or grime occurs inside the funnel.

Causes are normal mineral accumulation from hard water, along with food particles or grit trapped during dishwasher use.

Symptoms of a bad funnel include:

• Reduced or uneven water pressure to spray arms
• Clogs or blockages that hamper water flow
• Mineral deposits visible inside the funnel

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.