Parts for Bosch SHS5AV52UC/22: Pump Section Parts

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

If your dishwasher is leaking from the inlet or not filling properly, this water inlet housing connects your water supply. Moderate DIY repair.

Molded protective housing that replaces a cracked or missing cover. Shields internal wiring and components from debris and damage during normal use.

If your dishwasher door won't stay closed or latch properly, this lock clamp secures the latch assembly for reliable door sealing and engagement.

Dishwasher leaking from the bottom or won't drain? The sump assembly collects and channels water to the pump. Moderate DIY repair with video guide.

Water backing up into your dishwasher tub after draining? The check valve prevents dirty drain water from flowing back in. Moderate DIY repair.

Secures the dishwasher sump or sump cover to the tub for a tight, leak-resistant seal. Replace if missing, stripped, or damaged to restore stability.

Seals the sump area to prevent leaks and ensure proper water circulation and drainage. Replace if cracked, warped, or missing. Verify fit with your model.

The Drain Pump LID is an OEM part for Bosch dishwashers, designed to securely cover and protect the drain pump assembly. This crucial component ensures that the drain pump is shielded from debris and damage, allowing it to efficiently remove used water from the dishwasher at the end of each cycle.  

Causes of these symptoms can range from physical damage due to impact or wear and tear over time, leading to cracks, warping, or a degraded seal.  

Symptoms of a bad Drain Pump LID include:

• Water leakage around the drain pump area, indicating a poor seal or damage to the LID
• Increased noise during the drain cycle, which could suggest debris interference due to a compromised LID
• Difficulty in draining water, potentially caused by obstructions that a damaged LID failed to prevent

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Turbidity Sensor is an OEM part for Bosch dishwashers. It is a component located inside the dishwasher that plays a key role in monitoring water quality during each wash cycle. The turbidity sensor detects small food particles and residue in the water, relaying this information to adjust water temperatures, spray pressures, and cycle times accordingly to achieve optimal cleaning results.

Causes of failure could be normal wear and tear over time, mineral buildup affecting the sensor's ability to read water quality accurately, or damage from electrical faults.

Symptoms of a bad turbidity sensor include:

• Inconsistent or inadequate cleaning performance
• Extended cycle times
• Error codes displayed related to water issues

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Flexible plastic tube that carries used wash water from the dishwasher sump to household drain plumbing. Replace if cracked, pinched, or leaking.

If your dishwasher won't drain or has weak spray, the pump housing may be cracked or damaged. This component houses the circulating pump assembly.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Fix E09 error codes or no heat issues with this dishwasher circulation pump and heater assembly. Moderate DIY repair, typically 15 minutes to 2 hours.

Secures the hose between pump and heater in your dishwasher. Replace if loose, damaged, or causing leaks. Confirm fit with your model number.

Does your dishwasher shake or make loud noises during the wash cycle? A worn suspension damper may be the cause. This part absorbs vibration and stabilizes the tub.

Fix E24 or E25 error codes with this dishwasher drain pump. Solves noisy pumping, slow draining, and drainage failures. Moderate DIY repair.

Leaking dishwasher or E15 error code? A worn diverter valve seal allows water to escape during wash cycles. Moderate DIY repair with video guide.

Secures dishwasher wiring harness where it passes through cabinet. Replace if clip is cracked, broken, or missing to protect wires from strain and chafing.

Fix loose or disconnected dishwasher components with this retaining clip. Secures fittings and prevents misalignment during operation. Simple DIY fix.

Vent hose for dishwashers that guides steam and moisture out during wash cycles. Replace if cracked, disconnected, or worn to restore proper venting.

Secures hoses to fittings and prevents leaks in your dishwasher. Replace if stretched, corroded, or damaged to maintain a tight seal. Confirm fit.

The Water Inlet Fill Hose is an OEM part for Bosch dishwashers. This part is responsible for safely and efficiently connecting the dishwasher to your home's water supply, ensuring that water flows into the dishwasher at the correct pressure and volume for optimal cleaning performance. 

Over time, the Water Inlet Fill Hose can become susceptible to wear and tear, leaks and blockages.

Symptoms indicating the need for a new Water Inlet Fill Hose include:

• Water pooling around the dishwasher base, pointing to a potential leak in the hose.
• The dishwasher not filling with water properly, or filling very slowly, suggesting a blockage or damage to the hose.
• A visible inspection reveals cracks, bulges, or signs of corrosion on the hose connectors.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.