Customer Questions and Answers for Door Hinge by Bosch

Daniel, In order to remove the door hinges from the door you will need to disassemble the door. When the door is disassembled you will be able to take the hinges out.

Hello Kevin, I'm sorry but it appears that the hinge receivers are the parts you need and they are not listed by the manufacturer. This means that these are probably part of the bake tub assembly, which are also not listed, (not available). The best advice I can give you at this point would be to contact the manufacturer and see if they can provide you with a part number for the hinge receivers.

Hello Tony. Here is the information we have on the replacement. REMOVING THE OVEN DOOR CAUTION: Be careful handling the oven door when removing it, as it is very heavy. Never lift the door by the handle. 1. Pull the oven out of its mounting location so that you can access the left and right hinge pocket covers. 2. Remove the screws from the left and right hinge pocket covers and remove the covers. 3. Remove the locking screw from each of the hinges.4. Fully open the oven door5. Raise the U-clip over the hook on each of the hinges to lock them. This will prevent the hinge from snapping closed when the door is removed. 6. Grasp the oven door by the sides near the top, and carefully close it until the hook in the hinge contacts the hinge support (approximately 3/4 of the way). You will feel some spring resistance while you do this, which is normal. 7. Gently lean against the top of the door to hold it in position, and grasp the door firmly by the sides approximately 2/3 of the way down, then open the door slightly, and lift it until the hinges are free of the frame supports. Pull the hinges out of the oven slots and remove the door. REINSTALLING THE OVEN DOOR 1. Hold the oven door by the sides approximately 2/3 of the way down and insert the hinges into the oven slots near the top as far as possible.2. Lower the oven door to its fully open position. 3. Rotate the U-clips on the hinges forward to the unlocked position. 4. Close the oven door. 5. Reinstall the two hinge locking screws. 6. Reinstall the hinge pocket covers."

David, Unfortunately the door hinges 00488417 for your unit have been discontinued by the manufacturer with no suitable replacement. The part number you are looking at 00487746 do not work for your unit.

Kim, On your oven there should not be locking screws on the hinges. You would open the door fully and put the latch over the hook and push the door like you are closing it. This will enable the hinge to lift out of the door.

Rae, The door hinges for the lower oven door are part number 00487746.

Janice, The spring is part of the door hinge for your model which would be part number 00487747. This hinge will work for both sides.

Michael, Here's some information : "REMOVING THE OVEN DOOR CAUTION: Be careful handling the oven door when removing it, as it is very heavy. Never lift the door by the handle. 1. Pull the oven out of its mounting location so that you can access the left and right hinge pocket covers. 2. Remove the screws from the left and right hinge pocket covers and remove the covers. 3. Remove the locking screw from each of the hinges.4. Fully open the oven door5. Raise the U-clip over the hook on each of the hinges to lock them. This will prevent the hinge from snapping closed when the door is removed. 6. Grasp the oven door by the sides near the top, and carefully close it until the hook in the hinge contacts the hinge support (approximately 3/4 of the way). You will feel some spring resistance while you do this, which is normal. 7. Gently lean against the top of the door to hold it in position, and grasp the door firmly by the sides approximately 2/3 of the way down, then open the door slightly, and lift it until the hinges are free of the frame supports. Pull the hinges out of the oven slots and remove the door. REINSTALLING THE OVEN DOOR 1. Hold the oven door by the sides approximately 2/3 of the way down and insert the hinges into the oven slots near the top as far as possible.2. Lower the oven door to its fully open position. 3. Rotate the U-clips on the hinges forward to the unlocked position. 4. Close the oven door. 5. Reinstall the two hinge locking screws. 6. Reinstall the hinge pocket covers."

Hello Lewis, After extensive research, it appears that the part has been dis-continued and there is no satisfactory substitute. I would contact a local authorized dealership to see if they have been informed by Thermador of a part that will work in your application. The model number the tech looked up for you shows to be different and the parts do not show to cross, so I would find out from the manufacturer before paying shipping costs on a part that will not interchange.

Hello Ray, The door hinge 00414511 is listed for your model number so it should take care of your issue. As far as the display, you should check the low voltage transformer to insure it is sending power to the display. You should be able to do this with a helper, since the unit will have to be pulled out to access the internal components for testing and replacement.