Mark July 03, 2023 for Model Number JP350BOC1BB I need the infinite control switch for the 8 inch front burner, which one do I need?
1 Answer Mark, The front infinite switches are Left Front - WB23M9 & Right Front - WB24T10119 Read More...
Richard January 28, 2023 for Model Number JP350W0A2WW One of the burners on my range top is coming on at full and not taking temp adjustments. I guess I need a new infinite switch, but I navigated to one using this model number and when I did a cross check to see if it was right for my model, it said no. Which switch do I need.
1 Answer Richard, Thanks for the question!!! The compatibility tool looks for an exact model number written in a specific way. GE prints the model numbers on the unit with extra numbers in it. If you use your model number but remove the 0 between the W and A, like this JP350WA2WW. It shows this switch is for your model. Read More...
Jack June 26, 2022 for Model Number ZEU668V1BB I need A switch for my halogen element. Will this switch control a halogen element on a GE ZEU668V1BB?
1 Answer Jack, the halogen switch WB23K5053 would be used with the model number provided. Unfortunately, it has been discontinued by the manufacturer and is no longer available. Read More...
David November 21, 2021 for Model Number JP960B0A2BB My GE Profile Performance cooktop has Model # JP960B0A2BB on its label. It appears that your website only has Model # JP960BA2BB (https://www.appliancepartspros.com/cooktop-parts-for-ge-jp960ba2bb.html). Are they the same model? The left front burner (a part of the dual element) only works when the switch is at HI and somewhere between 9 and 8. The bridge and the back burner are OK. It appears that the switch for the left front burner needs to be replaced. Should I order Switch Infinite Control WB24X29364 / AP6284674 (https://www.appliancepartspros.com/ge-switch-infinite-control-wb24x29364-ap6284674.html)? Thank you very much!
Bob March 26, 2021 for Model Number 911.43679890 I have an older kenmore cooktop and I am replacing a infinite control switch with p/n WB24X29364 the terminals on the old switch are P,L1,L2,H1,H2 the new switch terminals are H1,L2,L1,HC,P. What is the proper wiring? Thank You.
1 Answer Bob, You would do a direct swap of the wires from one to the other except the H2 will go to the HC terminal. Read More...
Gary August 24, 2020 for Model Number jp3508ov1bb This is the only model number I can find on my GE Profile cooktop, and it doesn't match any of the numbers anybody (including GE) recognizes. I need the infinite control for the right front, largest, dual wattage element. The wattages controlled are 1000 or 1500, depending on the one selected with the little selector knob. It has 5 male spades on the bottom. It is rated at 10 amps 240volts. It has the following numbers on the side: INF 240 TP-1054 and 229C4188P001 and 9613CM. The case is square and black, not as tall as it is wide. The top is stamped steel. It has holes on two opposite sides, one giving access to some small set screw. Is there a replacement for this control? It was replaced once before with a control with the following numbers on the side: CTL011 and HL 812007 and 1431416 and WB23M9/WB23K5009. This control never did work right, but now has gone completely bonkers. Thanks
1 Answer Gary, Based on the information provided the element control for 3000W is WB24X29364 and for the 1200w it is WB23M8 and for the 1900w it is WB23M9 Read More...
Timothy May 21, 2020 for Model Number 911.42675991 Kenmore cook top m/n: 991.42675991. I need to replace the dual burner infinte switch. Old number p/n:229C4188P001, new p/n: WB24X29364 (WB23X5052). I received it without wiring instructions. Can you kindly advise he wiring instructions? Thank you.
1 Answer Hello Timothy, the manufacturer of your model does not supply instruction sheets for infinite switch replacement. Also no wiring schematics available for the same reason. In general, the new switch will wire the same way the original one was, L1 (black) 120v ,,L2 (red)120v,,, P (for the "on" indicator light ), H1 to one side of the circuit to the element and H2 (or HC) to the other side of the element. Read More...
Bob April 16, 2020 for Model Number Kenmore Cooktop 911.42679991 The original part has terminals marked P1, P2, P, H1, and H2. This replacement part WB24X29364 has terminals marked L1, L2, P, H1, and HC. What is the correct pairing?
1 Answer Bob, the wires would be transferred as follows: P1 will transfer to L1, P2 will transfer to L2, P will transfer to P, H1 will transfer to H1, and H2 will transfer to HC. Read More...
Henry March 20, 2020 for Model Number GEJCP930TC1WW Front right dual burner infinite switch on GE Profile smooth cooktop is not working--Info shows replacement switch is GE-WB24X29364. Problem is that the original switch wire terminals are labelled: Pilot, P1, P2, 2, 4. Terminals on new switch are labelled: P, H1, HC, L1, L2. I presume that Pilot wire goes to P on new switch, however, I do not know where the other four wires from the defective infinite switch should be attached to on the new switch. Please help me with which wire goes to which terminal on new switch! Thank you.
1 Answer Henry, the terminal P1 is changed to L1, P2 is changed to L2, Pilot is changed to P, 2 is changed to H1, and 4 is changed to HC. Read More...
Stuart October 15, 2017 for Model Number j p66080v188 GE Profile cooktop I need the infinity switch for my cooktop, I go through the selection but the model matching button says it is not compatable with my model. Please give me the part number I need. thanks, love the videos.