Customer Questions and Answers for Refrigerator Temperature Sensor by Ge

Hello Louis. This answer was located on our Repair Forum, this is a free service in which technicians will assist with answering repair questions for our customers. Please use this link to assist in your repair: http://forum.appliancepartspros.com/refrigerator-freezer-repair/108880-fresh-food-freezing-temp-continues-get-colder.html . Hope this helps!

Hello Louis. You will need to test the thermisters WR55X10025 and see if they are good. Here is a chart to use when testing. Thermistor
Temperature Resistance
77°F..................10,000 ohms
36°F..................29,500 ohms
0°F....................86,300 ohms

You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html

Hello Susan. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. Hope this helps. http://forum.appliancepartspros.com/refrigerator-freezer-repair/4220-ge-refrigerators-gs-ps-models-evaporator-fan-motor-test-replacement.html

Hello Paul. You will need to test the thermisters WR55X10025 and see if they are good. Thermistor
Temperature Resistance
77°F..................10,000 ohms
36°F..................29,500 ohms
0°F....................86,300 ohms You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html

Hello, is the freezer working fine or are both sides not cooling? If you are only experiencing temperature issues on the fresh food side, you will want to make sure you don't have ice build up on the evaporator coils. If you have ice build up, then you are having a defrost issue. The most common issue for your unit will be WR55X10942C. You can test the defrost thermostat with a multi meter MA-DM1, it should read close for continuity. You can verify the heating element WR51X10055 is working as long as you get a resistance reading. Hope this helps!

Hello Adam. The grill unsnaps from the liner of the refrigerator. There should be a slot on the side of it to unsnap it off with. Hope this helps.

Hello Benigno. You will need to check and see if there is a defrost problem with the refrigerator. Look for frost build up on the back freezer wall. If so, you will need to test the heater WR51X10101 and thermostat WR50X10068 and make sure they are good. They should read closed for continuity when cold. If they are good, and there is a defrost problem, you will need to change the main control board WR55X10942C. You can test this with a multi-meter MA-DM1. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html

Hello Greg! If you are speaking of the wiring grommet you do not remove this you splice the wires and wire in the new thermister sensor. Hope this helps!

Greg, The fresh food thermistor (you may have 2) is located behind/inside the oval shaped grille located on the left wall of the fresh food compartment, carefully pry the grille loose from the liner, Good Luck

Hi Greg, you should look for the cover WR02X10647 on the side walls of the fresh food side. You will snap the cover off and the sensor should come out as well. Hope this helps!