Aaron Fuchs June 24, 2017 for Model Number WM2277HW Control board shot. The part number on the board I pulled is 6871EC1087C. Your website compatibility check says this is not compatible with the WM2277HW washer. It also talks about a 6871ER1087C board. So what part do I order?
1 Answer Meenachem, Unfortunately we do not have information on life expectancy of a product. Read More...
Bgp September 10, 2016 for Model Number WM2277HW I'm searching for the replacement of main control board, and come across two different boards: 6871ER1003C and 6871ER1078T. Somebody said that which board to use depends on the serial number of the washer. My washer's S/N is 509KWPV06560. Can you confirm which board I should get?
1 Answer BGP, The part number that is showing as being the main board for your unit is 6871ER1078T. Read More...
Keith B July 07, 2016 for Model Number WM2277HS Like a few others my power board has no LED lit up when plugged in. Symptoms are nothing lights up when plugged in. Power to unit is good. It has a pretty black fuse but does not do anything differently when the fuse is shorted out.
1 Answer Hello Keith. If there is power and it does not light up, you will need to order and replace the control board on the unit. Read More...
Ernie S September 08, 2015 for Model Number LGR7646EQ3 Power on, lights on contro panel, no water coming out, and wont run. What's wrong, need help please?
1 Answer Ernie, You will want to check the power coming to the water valve and see if there is 120 vac getting to the valve. If there is not then you will need to check at the temp switch and at the timer to make sure that power is getting to them for the water valve. If there is power at the water valve then the valve is faulty and would need to be replaced. Read More...
David August 28, 2015 for Model Number WM2077CW I need a new motherboard 6871ER1003F will mortherboard 6871ER1003C work since they no longer make the F
1 Answer David, Unfortunately the main control board 6871ER1003F having been discontinued by the manufacturer, there is not a suitable replacement. The 6871ER1003C control board will not work as it may have different programming. Read More...
Vlad September 29, 2014 for Model Number WM2277HW When I start up my washing machine, it manages to start pouring water in. It only poured water in for maybe 5 seconds and then immediately shuts off giving me a CE error code. Since it is only 5 seconds, the rotor doesn't even have time to start to turn cycle. We did smell a bit of plastic smell not long before it broke down on us. I have took apart the machine, checked the motherboard for any signs of short circuiting or burns and there is none. I cannot find that any wires are fried as well and there are no visible leaks whatsoever. I have taken off the rotor and the stator and everything looked good as new. The barrel also turns very easily by hand and there is no obstruction. My only guess is that the motherboard maybe fried? What could be throwing this CE error code?
1 Answer Vlad, The CE error code indicates a over current error which would be caused by a main control board or the winding in the stator is shorted. Since it happens so rapidly the main control board would be the issue. The part number is 6871ER1003C. Read More...
Ian September 22, 2014 for Model Number WM2277HW Got the dreaded le locked motor error, replaced the hall sensor and checked all connections and wiring ok machine runs fine for a month them le again after playing around get it going and same thing, done this about 3 times no can' get it to turn, do you think it is a main board failing
1 Answer Hello Ian. If the wiring harness is good, and the rotor is good, then it leaves the board on the unit. Read More...
Walter January 24, 2014 for Model Number LG2277HB Washer won't start no lights on front display board. How to determine if main control bd or the display bd is at fault?.Power is available,noise filter is ok.Does the main control bd have a pilot light in middle that lights up when unit is working? If it does mine is out. Your response would be appreciated.
2 Answers Hello Walter, If the LED is not lit, the main PWB board 6871ER1078T is in need of replacement. Read More...
Walter January 24, 2014 for Model Number LG2277HB Washer won't start no lights on front display board. How to determine if main control bd or the display bd is at fault?.Power is available,noise filter is ok.Does the main control bd have a pilot light in middle that lights up when unit is working? If it does mine is out. Your response would be appreciated.
2 Answers Walter, If the led on the control board is not on then the issue would be the main circuit board. The main circuit board is part number 6871ER1003C. Read More...