Jack June 10, 2013 for Model Number RS2530BBP Ice maker model RS2530BBP,doesn't cycle new ice,I hit reset and tray rotates,ice drops,tray returns and re-fills,then it freezes promptly but never drops ice again own it's own,power freeze or not.Thanks for help
1 Answer Jack, You will want to check the thermistor resistance on the icemaker thermistor. If the resistance is not correct then you will need to replace the icemaker. Read More...
Rachel May 20, 2013 for Model Number RS2544SL The ice maker unit has ice cubes in the tray, and after pushing the "test" button, the ice flips into the bucket. But then it will not continue to operate as it should, but instead water will flow into the ice bucket, down the ice chute, all over the floor. Yikes! It was doing this for a few days and froze water all throughout the freezer shelves. Should we replace the ice maker unit?
1 Answer Rachel, It does sound like a faulty Ice maker control DA97-00258C.After the cubes dispense and fall into the ice bin, the twist tray should rotate back to it's original level horizontal position, If it doesn't the control module is at fault and will need to be replaced. Read More...
Keith May 09, 2013 for Model Number Samsung RS2578SH Hi - my refrigerator and freezer are working fine, however, it does not produce ice. The tray does not fill with water (although the water dispenser works fine). I've tried the reset button several times, and the unit always seems to cycle through fine, but obviously with the water, it won't produce ice. I have not noticed any frost anywhere, and everything else seems to be fine. The unit is 8 years old, and this problem has been happening for a year now. I'm tired of buying ice - please help. Will a new ice maker assembly fix the problem? A new control board? Both? Anything?? Thanks in advance!
1 Answer Hello Keith. Based on the information you provided, it sounds like the water valve DA74-40150H is bad and will need to be replaced on the unit. Read More...
Joe May 03, 2013 for Model Number RS261MDBP I just bought a house and the ice machine on the refrigerator only makes crushed ice. I've changed the settings but it won't change. It's also dropping large chunks of ice in the tray and its cracked the tray and put 2 holes in it. What parts do I need to buy to fix this problem? Thanks.
1 Answer Hello Joe. Check the solenoid and see if it is bad. If it is stuck, you will need to replace the solenoid. DA97-08223D is the ice bucket for the unit. Read More...
Paul April 19, 2013 for Model Number RS2530BBP - Samsung & 1491416 Control Module The sensor on the left, where does it belong on the ice maker? Itcame loose and I cannot find an obvious place to put it. I cannot find any convincing assembly pictures on the internet, either.
1 Answer Paul, The sensor would go on the bottom of the icemaker tray between the 1st and second cube stations. There should be a foam piece that the sensor sits in that has a plastic casing around it. The plastic casing is what holds the assembly to the icemaker. Read More...
1 Answer James, To replace the icemaker, in the front part of the icemaker there are 2 screws to take the entire assembly out of the freezer. Once out you will have to release the motor assembly and drop motor assembly down. Once out install new. Read More...
Richard March 27, 2013 for Model Number rs277acpn My ice maker tray does not turn to empty. Can you help?
1 Answer Hello Richard. If there is power to the icemaker motor, and it does not turn, you will need to replace the icemaker. You can press the button on the icemaker to cycle and test the unit. Read More...
Luis E. March 19, 2013 for Model Number Samsung 115 volts/60 Herz Model RS2534WW I am looking for the ice maker for this refrigerator; the exact fit. The ice maker model is NTGT001TA1 (E).
1 Answer Luis, according to your model the icemaker with the support is part number DA97-02203G. Thanks! Read More...
Dawn March 19, 2013 for Model Number RS2534VQ My ice maker started making a clicking sound last night, I tried to remove it and re install. It seems to get stuck after dumping the ice. Would this mean the motor is failing???
1 Answer Hello Dawn. Yes, based on the information you provided, the icemaker assembly DA97-00258C is bad and will need to be replaced on the unit. Read More...
Mark February 19, 2013 for Model Number samsung rs2545sh How does one remove the ice maker mechanism from the Samsung RS2545SH? I'll be buying a replacement from you if I can get the old one out, as it is frozen in the "dump" position. Many thanks!
1 Answer Hello Mark, At the font of the icemaker assembly there are 2 screws that hold the icemaker in place. You remove the screws and it will allow you to pull icemaker and bracket out. Read More...