Hal December 13, 2025 for Model Number KDTM354DSS4 On an upper rack that slips and is failing on the right side to stay in the high position when loaded which parts do i need to replace? The upper rack adjuster or the Right adjuster housing or both or ?? Please help
1 Answer Hello Hal, thank you for contacting AppliancePartsPros.com That would most likely be the adjuster WPW10546503 and/or the adjuster positioner WPW10195840. I recommend checking each of those for damage and wear. Read More...
Trent March 16, 2025 for Model Number KDTM354DSS5 Having trouble with sagging top rack that falls forward when the door is opened. Dishwasher itself is level, but there is a lot of play in the top rack adjusters when I lift the top rack manually. Adjusters themselves seem to work fine between positions and not seeing anything broken or missing in the adjusters but perhaps they wear out over time. Is this a sign of bad adjusters, or what else can cause the top rack to sag? Thank you
1 Answer Trent, This would most likely be an issue with the adjusters or rollers on the upper rack and would need to be replaced. Read More...
Huntley July 24, 2024 for Model Number KDTE104ESS3 Hi, Does the Upper Rack Adjuster WPW10546503 / AP6022813 work on either side of the upper rack. I need the rack adjuster for the left side of the upper basket (when facing the dishwasher). Thanks, -Huntley
1 Answer Hello Huntley, thank you for contacting APP, The Adjuster Housings are side-specific, Left WPW10588164 and Right WPW10588165, but the Rack Adjuster Assembly WPW10546503 is not side-specific. Read More...
Mark March 03, 2024 for Model Number Kenmore Dishwasher 665.13223N410 The wheels have broken off the upper dish rack. The part which they attach onto is WPW10546503. However, Appliance Parts Pros doesn't have this part listed with wheels. Then, what is the correct part number? I need this part for both the left and right sides. Thank you! Mark
1 Answer John, there will be a lever on each adjuster housing that would be pulled outward, allowing the rack to be adjusted. Once it is at the height needed, the lever would be pushed back in. Read More...
1 Answer James, This rack adjuster WPW10546503 does not use rollers. The tabs on the adjuster on either end will hook to the sliding rail. Read More...
1 Answer DiDiB, If they are broken you will likely have to pry the off with a screwdriver and then replace the damaged pieces. Read More...
Jenn July 09, 2022 for Model Number KDTM354DSS4 I watched your video on replacing the dishwasher upper rack adjuster for our kitchen aid and it was great, but we also have a cracked ‘adjuster housing’ and need to replace that too. Is that available on your site? Thanks!
1 Answer Jenn, THanks for the question!!! The housing is part number WPW10588164 for the left, the right is WPW10588165, and the back cover for both is WPW10250162. Read More...
Jpm April 26, 2022 for Model Number KDFE204EBL1 Sometimes when I load and try to start it will fill with water but won't start running. Sometimes the "Add Dish" light will be on even when completely full. Sometimes it will start on it's own like an hour later, sometimes I need to cancel the wash cycle and restart it 3 or 4 times before it will run as normal. Any help is appreciated.
1 Answer JPM, You will want to check to make sure that the door switch is good and if it is then the issue will be a faulty control board. Read More...
Ed October 13, 2021 for Model Number KUDE50CXSS4 I NNED TO KNOW IF PART NUMBER W10712394 WILL WORK FORTHIS MODEL OF THE KITCHENAID UPPER RACK ADJUSTER THANK YOU
1 Answer Ed, There is not a kit for the rack adjuster for your model and you will need to get part number WPW10546503 for the adjuster you need. Read More...