Regina February 27, 2015 for Model Number MFI2558AEQ Tech ordered the board to replace on frig...When he entered code it will not take code...He has tried multiple times....What to do...
1 Answer Regina, Either the wrong board was gotten for the series of model that you have or the programming is not being entered correctly. You will want to get the control board based on the first 2 digits of your serial number. Read More...
Brett February 18, 2015 for Model Number MFI2568AEW My ice maker wont dispense ice I changed the auger motor and it stii doesn't work it just hums. What's wrong?
1 Answer Brett, You will want to check to see if there is 120 vac going to the auger motor. If there is then check to see if the ice bin is jammed up causing the unit to not be able to dispense. If there is not then it may be a faulty main control board causing the issue. Read More...
Ted G January 26, 2015 for Model Number MFI2269VEB1 The light that illuminates when water is dispensed will not work. It work in the 'auto' mode nor the 'on' mode. Can I replace the light or does the control board have to be replaced. Everything else works okay.
1 Answer Ted, The part number that you would need to replace for the lights would be the yoke assembly WP13005703B. Read More...
Ann January 12, 2015 for Model Number AFI2538AES I have an 6/7 year old Amana Fridge/Freezer with the freezer on the bottom. The unit stopped cooling but the electronics and lights still work. I called a repair person and they took off the back panel inside the freezer and found a layer of ice on the top of the evaporator fins. Then told me the control panel was running hot and I need to replace the control panel for $500. But wouldn't the control panel be running hot if the evaporator had ice build-up? I did not see the technician test the evaporator fan - should he have? The tech ordered a new control panel but now I'm questioning if the tech was trained properly?
1 Answer Hello Ann. The ice will not cause the board to over heat. As for the fan, they should test for power coming to it. If there is no power, then the HV board W10890094 will need to be replaced. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Nash November 09, 2014 Hi, I have problems with my fridge Maytag MFi2568AEF. The fridge make a strange noise and the ice maker doesn´t work. I think is the electronic board. What do you think?
1 Answer Nash, If the noise that you are hearing is like a rapid clicking type noise then it would most likely be that the icemaker is hung up and would need to be replaced. Read More...
Jack C November 04, 2014 for Model Number MFI2269VEM1 Food in refrigerator is freezing. What is a possible cause?
1 Answer Hello Jack. You need to check the damper and see if it is bad and will need to be replaced in the unit. Read More...
Anthony October 16, 2014 for Model Number MF12568AES None of the functions on my keypad are working on interior lights can't dispense water or ice.
1 Answer Anthony, The first thing to check would be to make sure that the control is not locked. If the control is not locked then the most likely cause for the keypad to not work would be either the keypad itself or the Low Voltage control board. Read More...
Adam June 11, 2014 for Model Number maytag MFI2568AES The lights on the door turned off and the unit is no longer cooling. The lights still come on when the door is open. What part do I need to get to fix the problem? Or is there some trouble shooting or a reset that I can do?
1 Answer Hello Adam. Based on the information you provided, it sounds like the high voltage board W10890094 is bad on the unit. Read More...
Scott April 23, 2014 for Model Number MFI2269VEM1 Power went out during storm. Upon power coming back on the display on door was not working. Then noticed the refrigerator was no longer cooling. The light in the refrigerator comes on but that's about it.
1 Answer Hello Scott, You should run the service test as outlined in the tech sheet. This will enable you to run tests on the unit without any special test equipment. You can force any component on and off with this test. If you cannot run the tests as described, the control WPW10310240 has failed and will require replacement. Read More...
Joyce M February 28, 2014 for Model Number MFI2568AES We have a Maytag H2O French door fridge. Lately there is a pronounced click whenever the water/ice dispenser lever is pressed... Almost sounds & feels as if it's sticking. No other issues, water & ice dispensing fine. Just concerned that there may be a developing issue with the lever. Could the lever or a closure/flap be sticking? If so, how can I resolve? Thanks.
1 Answer Hello Joyce. Check and see if the lever is broke and is sticking or if the micro-switch needs to be replaced on the unit. Read More...