George April 17, 2018 for Model Number MFI2266AES I am looking for a replacement ice maker but I am not certain which part number is correct. Model MFI2266AES Serial 10066741LX
Michael October 26, 2017 for Model Number MFI2568AES Icemaker stopped working. The "teeth" which the ice cubes are meant to slide off of; 1 often gets pushed down by the rotating ejectors. If I correct this issue, it woks again for a few cycles, then the same problem occurs. Label on Icemaker shows 130357-02 REV0 and R039060818452A. Do I need an entire Icemaker of is there abetter solution for me?
1 Answer Michael, Yes, your best bet is to replace the ice maker assembly. There is some "play" in the rotating ejectors, But not as much as you're describing. The excess movement in the ejector, would indicate a problem in the motor/linkage of the control head, and/or a problem in the mold and heater assembly, causing excess force needed to eject the cubes. Read More...
Tom September 30, 2017 for Model Number MFI2568AES Ice maker stopped working. Found white grains of something in the bin. The 2 cogs in the front which I believe turn the ice discharge are in perfect condition. The auger turns fine when selected. In the far back of the ice maker where I believe the water is added to the maker was a frozen bock of ice right to the top of the compartment. Is there another set of white cogs that could have stripped and ended up in the bin other from the ice maker itself? I thawed out the block and waiting to see if anything happens. I don't want to buy the ice maker and find out it was another part that failed. Thanks
1 Answer Tom, With the fill cup being clogged with ice then this issue would most likely be a faulty water valve allowing water to seep into the icemaker. The other thing to check is with the ice bin to make sure that the ice bin is not damaged in any way. Read More...
Jeff April 13, 2017 for Model Number AFI2538AEB OK I NEED TO KNOW IF YALL HAVE JUst the ice maker wire harness in the picture and the one it connects to that connects to the 1 inside the fridge if not can you get them and if not can you put me in the right direction to get them ! please please please ! i am in dire need of both of them !
Jeff April 10, 2017 for Model Number AFI2538AEB OK I ask the question earlier about the wire colors on the ice maker harness and the picture of the harness in your parts shows a purple wire running into the plug that goes onto the silenoid and and for the other side of the plug it has a white wire coming from the harness going into the other side with a short wire coming out of the same side of the plug but on my harness the white wire is sliced into and runs to the silenoid plug on 1 side and the pink wire running to the other which both sides of the plug have a little short wire coming from them that connect to each side of the auger motor and also a green/yellow wire coming from the harness that is spliced and running to the auger motor is this right and if not hoe can i fix this because 1 of the harnesses yall are out of stock for and the other is dicontinued from factory !
1 Answer Hello Jeff. Yes, purple is violet and the whites are spliced together and so are the green/yellow wires. We have no control over a part being discontinued. You will need to contact the manufacturer in that case. Read More...
Mike January 19, 2017 for Model Number mfi2568aes What is the replacement icemaker for this refrigerator?
D.J. August 06, 2016 for Model Number Amana AFI2538AEW My ice maker quit making ice. Water still comes out thru door. Filter was just changed. I poured some water into the ice maker and it never ejected the ice. Do I need to replace the ice maker?
1 Answer Hello D.J., If the icemaker will not cycle on its' own with water in it, the issue is most likely the icemaker assembly W10583817. Read More...
Vicki August 03, 2016 for Model Number AFI2538AEW I have a cust that has an icemaker that doesnt look anything like what this model calls for. part w10519364? please help..
1 Answer Hello Vicki. For the model number you provided, W10583817 is the icemaker you will need to order for the unit. Read More...
Jeffrey May 26, 2016 W10519364 I installed this ice maker (with some difficulty. the instructions could be a lot better). it makes ice but doesn't dispense. is that the auger motor....or solenoid? or could it be both. which part do I buy next? the instructions say to cut off a plastic tab but I never could find what tap that was. everything fit anyway. does THAT TAB do anything
1 Answer Hello Jeffery. No, it shouldn't be the tab. You will need to check the auger motor and see if it has power and if it is running. Read More...
Jeff W May 24, 2016 for Model Number W10519364 Whirlpool/maytag ice maker. Looking at the diagram it appears to be the front 2/3 of the ice maker assembly. Mine is not making ice, don't know why. Could be the auger/motor/fan on the back end. IS THAT INCLUDED. Instructions seem to say to attach "ice maker" to old auger/motor etc BUT maybe that's what doesn't work. Are there two parts I need to buy? Dispensing arm is stuck (even after defrost) in the up position so can't tell if water flows or not.
1 Answer Jeff, If the icemaker is not making ice then it would just be the icemaker that would need to be replaced. The auger and motor assembly would not be with the icemaker and would not cause the no ice issue. Read More...