1 Answer Hello Alex. If the pump is bad, it can leak, make noise, or not turn. Hope this helps. Read More...
Frank S. June 07, 2011 for Model Number kenmore 80 series model # 110.15862400 The washer wont drain. I removed the pump and its clear but noticed that its hard to turn the impeller. Is that normal ?
1 Answer Hello Frank. Does the unit spin? If not, check the lid switch WP3949238 and see if it is bad or broken. Hope this helps. Read More...
Andrew June 05, 2011 Water pumps plastic keeps breaking in the same spot between the hoses are these defective pumps or is another issue causing the plastic to break. Part Number: AP2907492 Made by Whirlpool
1 Answer Hello Andrew. The pump WP3363394 needs water to keep it cool. Make sure if you do any extra spins, that there is water added to keep the pump cool. Otherwise, it can crack the pumps from the heat. Hope this helps. Read More...
Don May 22, 2011 for Model Number LSQ9659PW4 Washer is leaking water. Have not used it in a couple days and there is a large puddle around it. I have checked the fill hoses and they are fine. Believe it may be an internal hose or pump. Please advise on possibilities and how to check. Thanks, Don
1 Answer Hello Don. You will need to check and see if the water valve WP3979346 is leaking. If so, you will need to replace the water valve on the unit. Hope this helps. Read More...
Louis May 21, 2011 for Model Number kenmore elite 8526053/3356472/sm9711174 I found these number on my washer don't know which one is correct I know that the pump is leaking but dont want to buy the wrong one.
1 Answer Hello Louis. According to the numbers you provided, WP3363394 is the correct part number for the pump. Hope this helps. Read More...
Dave May 19, 2011 for Model Number SAWS800MQ0 Wife washed load of rugs and may have had small rocks. Machine has grinding sound now. Sometimes clothes are quite wet after spin. I assume needs new pump. How do I remove control pannel to get in the unit? Dave
1 Answer Hello Dave. There are two screws on the back of the endcaps. You will need to remove these screws, and pull forward, and flip the control banel backward, to access the clips holding the cabinet to the frame. Hope this helps. Read More...
Jeff May 15, 2011 for Model Number taws800jq1 Clothes are too wet after spin cycle. Sometimes it should be spinning but it doesn't.
1 Answer Hello Jeff. Check the motor coupling 285753A and make sure it is good. If so, Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. Hope this helps. http://forum.appliancepartspros.com/washer-repair/3265-replacing-direct-drive-washer-brake-shoes.html Read More...
Jesse J. May 13, 2011 My washer will not fill up with water-turn to drain/spin cycle and it does drain but not spin-turn to wash and agitator works fine.
1 Answer Hello Jesse. You will need to test the lid switch and make sure it is good. If it is bad, you will need to replace the lid switch. You can test this with a multi-meter MA-DM1. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Kenny May 07, 2011 for Model Number IAS5000RQO Machine washes fine but while on spin it will not drain.
1 Answer Hello Kenny! Check the drain hoses to make sure they are not clogged. Also check the drain pump to make sure there isn't anything stuck in the pump restricting it. If all is ok, replace the pump WP3363394. Hope this helps! Read More...
Camilo April 10, 2011 for Model Number DU800CWDBO Washer is not getting water. It does run, but no water being taken into the dishwasher. I checked the water supply line and it is clear.
1 Answer Hello Camilo. You will need to check the float and make sure it is not stuck in the full position. Make sure it moves freely up and down. If it is good, you will need to see if your getting power to the water valve. If there is power there, but no water, you will need to replace the water valve 3374621. Hope this helps. Read More...