Julie V. July 15, 2011 for Model Number kenmore model 11026914691 I need to replace the Lid Switch for my washer machine, but I don't know what part number I need to buy. Thank you.
Julie V. July 15, 2011 for Model Number 11026914691 KENMORE I need to replace the lid switch and I don't know how to change it. Where is the old one in the washing machine? I can't find it.
1 Answer Hello Julie! Your washer lid switch is part number WP3949238. Here is a link from our free repair forum with information on how to disassemble your washer and replace the lid switch. Hope it helps! http://forum.appliancepartspros.com/washer-repair/78460-washer-lid-switch.html Read More...
Julie V. July 12, 2011 for Model Number 11026914691 Hi, for a Kenmore Washer water pump this part #AP2907492 is compatible with this #3363394? Thank you.
1 Answer Hello Julie. Yes, WP3363394 is the correct pump for the model number you provided and is the factory replacement. Hope this helps. Read More...
Julie V. July 12, 2011 for Model Number 11026914691 Hi, this model is for a washer kenmore, I need to replace the washer pump but I don't know what # I need to buy thank you
Ace P. July 12, 2011 for Model Number 110.92291100 On my washer the water comes out very slow on both hot and cold settings. We already checked and clean small filting screens. But we still have a problem. What else can it be?
1 Answer Hello Ace. You will want to make sure that both the screens at the end of the hoses and the one's located on the water inlet valve are clean from any obstruction. If all screens are clean you will want to consider replacing the water valve assembly 3357901. Hope this helps! Read More...
Darrin K. July 11, 2011 for Model Number LSQ9110PW0 Is the pump motor allways suppose to be turnning the pump through all cycles?
1 Answer Hello Darrin. The pump is mounted to the motor and will always run as long as the motor is running. Thanks! Read More...
Kim July 10, 2011 for Model Number 11026844690 My washer runs, goes through the cycles but seems to be leaking out the bottom. What would the problem be?
1 Answer Hello Kim. You will need to check and see if the pump WP3363394 is leaking. If so, you will need to replace the pump. You can tilt the washer backwards and look and see if the pump is leaking. Hope this helps. Read More...
Bob July 04, 2011 for Model Number lsq9665jq3 Hi, our washer runs, but when it should drian the water it will not do this? Could it be the pump? It also will not spin.
1 Answer Hello Bob. You will need to check the lid switch 3949247V and see if it is broke or bad. It should read closed for continuity with the lid closed. If it is bad, the machine will not spin or drain. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Rina June 21, 2011 for Model Number 11029522801 My washer will fill but not sprin or drain. Noise is heard. Is this the water pump and where is it located?
1 Answer Hello Rina. You will need to test the lid switch WP8318084 and see if it is bad. If so, you will need to replace it. It is located under the control panel. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Lucy T. June 13, 2011 for Model Number LA5800XTWO My washer want start no matter what I try. I had a load of close in it,and I had to drain the water out it just stoped.
1 Answer Hello Lucy. You will need to test the lid switch W10820036 and see if it is bad or broken. If so, you will need to replace the lid switch. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...