Ralph January 09, 2017 for Model Number 106.58242890 My Side by Side wasn't running, only the condenser fan. I check at the start relay and it wasn't working. I had voltage to it but the compressor wouldn't start. I removed the relay and ohms out the compressor and it checked out ok. My question is what number on the relay does the red wire go to and what number the white wire goes to. I failed to remember which was which. Thanks in advance for your help. Ralph.
1 Answer Hello Ralph. The red goes to the overload and the white goes to number 5 on the relay. Read More...
Paul November 30, 2016 for Model Number ED22PQXFW01 For this Whirlpool side-by-side, on the starter relay (part AP6006896) which terminal (1-3) do you connect the white neutral wire too? I know the red goes to the overload switch. Thanks
1 Answer Hello Paul. If you look on the back of the relay by the holes, the white goes to number 5. Read More...
Dye October 26, 2016 for Model Number Whirlpool refrigerator Model: ED5LVAXVQ00 When running the 8 year old refrigerator has started making a clicking sound. The run sound will be low then after the click the run sound volume increases. Sometimes it will click several times for multiple minutes. Other times it doesn't click at all.
1 Answer Dye, This issue would most likely be a relay in the defrost control board that is making the clicking noise and the part number for the board is WPW10366605. You may also notice when the door is open that the filter indicator may be blinking or flashing in conjunction with the noise. Read More...
Fred July 06, 2015 I have a GARF19XXVK01 and can hear the compressor clicking. I see two start relay's. Is this the right one? Thanks
1 Answer Hello Fred, If the unit still has the original compressor it will need the start device WP2225929. If the compressor has ever been changed, the replacement compressor will require the start relay W10920279. Read More...
Troy January 08, 2015 for Model Number 10658242890 The white wire goes to what terminal on 2262185 start relay for compressor?
1 Answer Hello Troy, The hot wire on this model is red so it will connect to the overload WP61006294. The white wire is neutral so it will connect to terminal 3 on the relay W10920279. Read More...
Cheryll October 07, 2014 for Model Number Whirlpool Refrigerator Model ED25PQ Good Morning: I have a side by side that will run and cool/freeze for a day or two and then stops working and warms up inside. I was wondering if it could be a relay switch problem or the switch (can't remember name) that tells the unit to turn back on when it needs to. Thanks so much...Having to try and fix this myself. Cher
1 Answer Hello Cheryll. It sounds like the cold control WP2198202 will need to be replaced in the unit. Read More...
John August 21, 2014 for Model Number LBC22518WW My refrigerator is not cooling. I hear the click when compressor sttempts to start, so I figure the start switch relay, compressor overload, or both. Problem is I can't find the exact match or even a cross reference part number that is correct. Can you please provide the correct part choices? Thank You
1 Answer Hello John, This is most likely going to be a bad start relay 6749C-0014E on the compressor. Read More...
Bill P July 31, 2014 for Model Number KSRS25QGWH01 Replaced the Start-up relay (2262185) and forgot to note the Red, White and Blue wires connections to which terminal! Help! Bill
1 Answer Hello Bill. Red to the overload, Blue to the Start terminal, and White to the run terminal. Read More...
Spencer W G July 02, 2014 for Model Number ASD2514ARW There is a blue wire for the overload and a double orange wire and a single white wire for the relay. The two relay wire connectors and different sizes and the new relay has both the same size. The smaller connector will not attach. Please provide detailed installation information.
1 Answer Spencer, Aside from just clipping the smaller terminal off and installing the correct size wire on the terminal you would want to get the overload relay kit part number 8201786 which would have a jumper wire. Read More...
Alan June 05, 2014 for Model Number EB19ZKXRWRO Which is the correct start relay and overload for original compressor in a whirlpool EB19ZKXRWRO? I'm having trouble finding a replacement is there a universal one for whirlpool 3 prong compressor.