Range Hood Blower Wheel Or Fan Blade

This Range Hood Fan Blade is an OEM part for GE range hoods. It is a vital component that helps circulate the air and remove smoke, odors, and cooking fumes from your kitchen. The fan blade is designed to fit securely onto the range hood motor shaft, rotating rapidly to create airflow within the hood. 

Causes of a faulty fan blade can include wear and tear over time, damage due to accumulated grease or debris, or physical impact. These factors can result in a loose or unbalanced fan blade, reduced airflow, or noisy operation of the range hood.

Symptoms of a bad fan blade may include:

• Decreased airflow or ventilation efficiency
• Excessive noise or vibration during operation
• Visible damage or deformation of the fan blade

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement blower wheel circulates air through the dryer to restore proper airflow for efficient drying and venting. Replacing a worn or damaged wheel can reduce noise and help prevent overheating caused by restricted airflow. What it does

• Spins on the dryer motor shaft to pull air through the drum and exhaust vent.
• Restores airflow to address long dry times and poor drying performance.
• Reduces rattling or scraping noises caused by a cracked, bent, or imbalanced wheel.
• Helps prevent overheating and burning odors that can occur when airflow is restricted.

• Disconnect power (and gas supply for gas dryers) before beginning any repair.
• Access may require removing the dryer drum or front panel depending on model.
• Inspect the motor shaft, mounting hub, and set screw for wear; ensure the wheel is seated and tightened to the shaft.
• Wear gloves and eye protection; check the exhaust duct for obstructions after installation.

Replacement fan blade designed to restore airflow and reduce vibration and noise in range-hood and ventilation fans. Replacing a damaged blade helps the blower run more smoothly and can prevent additional wear on the motor. What it does:

• Moves air when mounted to the blower motor shaft to maintain proper ventilation.
• Restores normal airflow when the original blade is cracked, bent, or missing.
• Reduces wobble, scraping, or rattling noises caused by damaged or unbalanced blades.
• Helps avoid extra motor strain and premature blower wear from an unbalanced assembly.

• Always disconnect power to the appliance before starting any service.
• Remove the hood grille or access panel and use basic hand tools to remove the old blade and install the replacement.
• Ensure the blade is correctly seated on the motor shaft and clears the housing before restoring power.

This replacement fan blade restores airflow in hood and ventilation blowers by moving air through the fan assembly. Use it to replace cracked, bent, or worn blades and help reduce vibration and noisy operation. What it does:

• Spins on the blower motor to generate airflow for ventilation and exhaust.
• Replaces blades that are cracked, bent, or visibly damaged and causing reduced airflow.
• Can reduce unusual noise and vibration caused by an imbalanced or broken blade.
• Helps restore proper vent performance when airflow is weak or inconsistent.

• Disconnect power to the appliance before starting any service.
• Remove the blower housing or access panel to reach the blade; follow OEM instructions.
• Keep fasteners and spacers in order during disassembly; reassemble with original hardware unless replacements are specified.
• If vibration or noise persists after replacing the blade, inspect motor bearings, mountings, and blower housing for damage.

This replacement fan blade restores proper airflow inside your microwave, helping cool internal components so the unit runs reliably and quietly. A worn or damaged blade can reduce ventilation and lead to noise or overheating during operation.

• Circulates air to help cool internal parts and maintain proper airflow
• Helps reduce humming, rattling, or scraping noises from a damaged or unbalanced fan
• Can address weak or no airflow from the fan area
• May help prevent overheating or thermal shutdowns caused by poor circulation

• Disconnect power to the microwave before servicing to avoid electrical shock
• Access the fan area; remove grille/panels as required
• Note blade orientation; transfer any clips, spacers, or hardware from the original
• After installation, spin the blade by hand to ensure free movement before restoring power

This replacement fan blade restores airflow in compatible Broan ventilation hoods and exhaust fans, helping reduce noise and improve ventilation performance. Designed to match the original fit and balance for reliable operation. What it does:

• Replaces a bent, cracked, or missing exhaust fan blade to restore proper airflow
• Helps stop rattling, vibration, or scraping noises caused by damaged blades
• Restores balanced rotation to reduce motor strain and improve venting
• Suitable for use in range-hood and bathroom exhaust blower assemblies where this blade is specified

• One (1) fan blade

• Turn off power to the appliance at the breaker before servicing
• Verify blade orientation and secure mounting per the original hardware
• Inspect shaft and housing for damage; replace motor or fasteners if worn

This replacement blade-fan moves air inside the appliance to help maintain proper temperature and prevent ice buildup. It restores airflow so the appliance can cool and cycle as designed. What it does

• Circulates air over coils and compartments to support even cooling
• Helps prevent frost accumulation and hot spots caused by poor airflow
• Commonly replaced when airflow is weak or the fan is noisy or damaged
• Works with the original fan motor hub to spin smoothly and efficiently

• One blade-fan

• Disconnect power before beginning any repair to avoid electrical shock
• Handle the fan blades carefully to avoid bending; a warped blade can vibrate or rub
• Inspect the fan hub and motor before installation; replace damaged mounting hardware as needed

This impeller is the rotating pump component that moves water through the appliance, restoring spray and circulation performance. Replacing a worn or damaged impeller helps resolve poor wash/rinse results and noisy pump operation. What it does:

• Drives water flow inside the pump housing to maintain proper spray and circulation.
• Can cause weak sprays, poor cleaning, or unusual pump noises when worn or broken.
• Fits the CW H98/HB style pump assembly and interfaces with the pump shaft and housing.
• Designed for direct OEM-fit replacement where this impeller is specified.

• Recommended for users comfortable disassembling pump housings; refer to your service manual for specific steps.
• Disconnect power and turn off the water supply before starting service.
• Inspect the pump housing, seals, and shaft for wear; replace any damaged components to prevent repeat failure.
• Use appropriate tools and handle plastic parts carefully to avoid cracking.