Range Hood Terminal Block, Receptacle Parts

The Light Socket is an OEM replacement part for Broan range hoods. This electrical fitting provides a power connection point for light fixtures above stovetops. A faulty socket jeopardizes safe operation.

Causes of a bad socket can include loose wire connections allowing arcing or shorts, moisture intrusion corroding terminals, or cracking of plastic insulation. 

Symptoms of a bad light socket include: 

• Intermittent or non-functioning lights  
• Warm socket housing or abnormal smells/sounds
• Tripped breakers or blown fuses servicing the range hood

This OEM component fits additional brands like Thermador, Viking, and some Kenmore range hood models using equivalent Broan designs.

Replace a cracked or heat-damaged light socket base with this ceramic insulation base. It insulates and secures the lamp receptacle, helping the bulb seat correctly and maintain a reliable connection for consistent lighting.

• Provides a heat-resistant, insulated mounting point for the light socket
• Helps maintain a stable electrical connection to the bulb
• Common symptoms: light won't turn on with a known-good bulb, flickers, bulb won't seat securely, scorch marks or cracking at the socket base
• Restores reliable illumination when the original base is worn or damaged

• Disconnect power at the breaker or unplug the appliance before servicing
• Allow the area to cool completely before working near the lamp
• Handle ceramic components carefully; transfer any leads or hardware one at a time to maintain correct wiring
• Use the correct bulb type and wattage as specified by the appliance rating label

The Lamp Holder is an OEM part for Bosch range hoods. It secures interior lighting fixtures in place above the stovetop, managing connecting wires neatly out of the way. Proper holder positioning ensures consistent task illumination.

Causes of failure can include normal wear from sustained vibration in the kitchen environment. Periodic replacement preserves essential visibility above the cooktop.

Symptoms of a faulty lamp holder are:

• Interior hood light failing to illuminate or flickering inconsistently
• Visible damage or deterioration of mounting clips/anchors
• Loosening of lighting unit from repeated cleaning

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This lamp socket holds the appliance light bulb and provides the electrical connection it needs, restoring reliable, steady lighting so you can see clearly during cooking and routine checks.

• Provides secure electrical contact to power the light bulb
• Holds the bulb firmly in the light assembly
• Replaces heat-damaged or brittle sockets that cause flickering or no light
• Common symptoms: light won't turn on with a known-good bulb, flickers, bulb won't seat, or visible charring/melting at the socket

• Disconnect power at the breaker and allow the appliance to cool before service
• Wear cut-resistant gloves; nearby metal and glass edges can be sharp
• Move wires one at a time from the old socket to the new to maintain correct connections
• Install a bulb that matches your model's specified type and wattage before restoring power

This lampholder is the light socket that secures the bulb and delivers power so your appliance lighting works reliably. Replace a worn or heat-damaged socket to restore steady illumination and dependable operation.

• Provides secure mounting and proper electrical contact for the light bulb
• Fixes issues such as no light, flickering, or bulbs that won't stay seated even after replacement
• Replaces sockets with visible cracks, discoloration, or burned contacts
• Uses the bulb type and wattage specified for your model

• Disconnect power at the breaker or unplug the appliance before servicing
• Use only the bulb type and wattage listed for your appliance; seat the bulb fully without overtightening
• Transfer any mounting screws, bracket, or connectors from the original part as required by your model

This socket is an electrical wire terminal that provides a secure connection between wiring and a compatible appliance component, helping restore reliable power transfer and prevent loose or intermittent connections. What it does:

• Accepts and holds a mating terminal to complete an electrical circuit
• Restores a secure wire-to-component connection when the original socket is damaged or worn
• Helps stop intermittent power, sparking, or heating at a loose connection
• Used where a durable, removable terminal interface is required

• One socket terminal (single piece)

• Turn off and disconnect power to the appliance before servicing
• Inspect mating terminals and wiring; replace any damaged wires or connectors
• Push the mating terminal fully into the socket until it locks; ensure proper orientation

Lamp holder that secures the interior light bulb and provides the electrical connection for reliable refrigerator illumination. Replacing a worn socket restores steady contact and helps fix no-light, flickering, or intermittent interior lighting. What it does:

• Secures and aligns the interior light bulb while providing the electrical contact to the appliance lighting circuit.
• Replaces corroded or damaged sockets that can cause no light, dim or flickering bulbs, or bulbs that won't stay seated.
• Fits behind the interior light cover and connects to the existing wiring in the lighting assembly.
• Serves as a direct single-piece replacement when the socket shows visible damage, burn marks, or loose contacts.

• Disconnect power at the wall outlet or breaker before you begin to avoid electrical shock.
• Allow the bulb to cool and remove it before replacing the socket; handle wiring and terminals carefully.
• Make sure connections are secure and insulated; if wiring is frayed or damaged, replace wiring.

This lamp holder assembly secures and powers the refrigerator interior light so you can see inside the compartment. It replaces a cracked, loose, or nonworking socket to restore reliable interior illumination. What it does

• Holds and provides the electrical connection for the interior light bulb.
• Replaces damaged or cracked socket housings that cause intermittent or no light.
• Secures the bulb in the correct position so the door switch and light operate properly.
• Helps eliminate flickering, loose bulb fit, or a socket that won't hold the bulb.

• 1 lamp holder assembly

• Disconnect power to the appliance before starting any repair (unplug or switch off breaker).
• Remove the bulb and cover/panel per your appliance instructions to access the socket.
• Disconnect wiring harness and replace the socket; ensure connections are secure and insulated.
• After installation, restore power and test the light operation.

The Light Socket is an OEM replacement part for Whirlpool range hoods. It is a component that holds and provides electrical connections for the light bulb(s) within the range hood. The light socket ensures proper illumination, allowing you to clearly see the cooking surface below.

Symptoms of a bad Light Socket include:

• Range hood lights not turning on or flickering
• Visible signs of burning, melting, or damage to the socket
• Difficulty inserting or securing the light bulb in the socket
• Electrical arcing or sparks coming from the socket area

Causes of a bad light socket can include electrical faults, such as short circuits or voltage surges, physical damage from impact or exposure to heat and moisture, and general wear and tear over time. A faulty socket can prevent the range hood lights from functioning correctly.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore range hood models.