Parts for Maytag MFT2976AEB00: 03 - Refrigerator Liner Parts

Fix leaking water lines or no water flow to your dispenser or ice maker. This water tube routes water from the inlet valve to the filter manifold.

The Reservoir is an OEM part for Whirlpool refrigerators. It is designed to store and dispense water within the refrigerator, typically connecting to the water dispenser and ice maker. This reservoir ensures a consistent supply of water, facilitating the production of ice and providing chilled water for consumption.

Causes of a bad reservoir can include mineral buildup from hard water, cracks or leaks due to wear and tear, or contamination from foreign particles.

Symptoms of a bad reservoir include:

• Water leaks inside the refrigerator
• Reduced or no water flow to the dispenser or ice maker
• Odd tastes or odors in the water
• Ice production issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Fix no ice or water dispenser issues with this refrigerator water inlet valve. Controls water flow to ice maker and dispenser. Moderate DIY repair.

Holds the water filter and routes water to the dispenser and ice maker. Replace if cracked, leaking, or won't engage the filter. Confirm fit by model.

Access panel cover that shields internal components and restores a clean finish. Replace if cracked, broken, or missing to protect wiring and parts.

Replacement cover panel for your refrigerator. Installs on exterior or interior surfaces. Needed when original is cracked, broken, or missing.

Flip-down door won't stay closed or open smoothly? This push latch secures compartment doors with a spring-action catch. Simple DIY fix in minutes.

Replacement door filter access cover for your refrigerator. Secures and protects the water filter compartment. Replace if cracked or missing. Verify fit.

This heater fill tube directs water to the appliance's heating area to enable proper operation and efficient cycles. Replacing a damaged or clogged tube restores correct water routing and helps prevent leaks or heating issues. What it does:

• Routes incoming water to the heater/float area so the appliance can heat and process water as intended
• Prevents leaks by maintaining a secure, routed path for water flow
• Helps avoid poor heating performance caused by blockages or cracks in the tube
• Commonly replaced for visible cracks, splits, or when water sprays or leaks near the heater area

• One heater fill tube

• Disconnect power and shut off water supply before beginning any repair
• Inspect surrounding hoses, clamps, and fittings; replace any damaged hardware for a reliable seal
• Use basic hand tools; follow the appliance service manual for disassembly and routing details

Replacement fastening screw for securing trim, panels, and brackets inside appliances. Use when original screw is missing, stripped, or damaged.

This foamed icebox assembly is the insulated inner cabinet section for the freezer compartment that restores proper insulation and airflow, helping the appliance hold temperature and reduce frost buildup. What it does:

• Replaces a damaged or cracked icebox liner to restore the sealed, insulated freezer cavity
• Helps maintain consistent cold temperatures by restoring the factory foam insulation
• Reduces excess frost and moisture caused by gaps or damaged cabinet parts
• Provides the structural inner shell for evaporator and shelving mounting points

• One foamed icebox assembly

• Disconnect power and, if applicable, water supply before starting; follow safety precautions
• Replacement typically requires partial disassembly of the freezer section and removal of components mounted to the icebox (evaporator, shelves, trim)
• Use appropriate fasteners and sealants as needed per OEM instructions; check alignment before reassembling

Replacement housing assembly for your refrigerator. Installs to enclose internal components. Order a new one if your original is cracked or damaged.

Water pooling at the bottom of your fridge? The evaporator drip pan collects condensation from the defrost cycle. Easy DIY replacement—just pull out and set in.

Fix warm fridge temps or excessive frost with a new evaporator fan motor. Restores proper airflow across coils for consistent cooling. DIY-friendly.

Refrigerator not cooling properly or freezing up? The dual evaporator assembly absorbs heat to maintain cold temperatures. Advanced repair, 2-3 hours.

LED light module illuminates your refrigerator interior. Replace when lights become dim, flicker, or stop working entirely. Verify fit with your model.

Refrigerator not cooling but freezer works? A failed evaporator fan motor stops cold air circulation. Moderate difficulty repair requires panel removal.

The Heater is an OEM part for Whirlpool refrigerators. It is a thin heating element located behind the cover for the ice compartment inside the fresh food section that functions to prevent condensation from accumulating.

Causes of a bad heater can include failure of the heating element over many cycles of use, cracks or breaks due to normal wear and tear or repeated door opening/closing stress.

Symptoms of a bad heater include:

• Foggy or clouded refrigerator door panels
• Visible condensation building up inside refrigerator doors
• Potential for water droplets or leaks inside door panels

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Refrigerator light won't turn off or on? The door switch detects when the door opens and closes. Easy 5-minute DIY repair with a pick tool or scraper.

Insulation foam panel for refrigerator. Installs inside cabinet walls to maintain temperature efficiency. Replace if cracked, compressed, or missing.

This is a mounting support bracket that holds the fresh food compartment fan motor in place inside the refrigerator. The fan circulates cold air throughout the fresh food section to maintain even temperatures. Replace this support if the fan motor is loose, vibrating excessively, or making rattling noises due to a cracked or broken bracket.

This adapter kit mounts to the rear of the ice box compartment inside the refrigerator, connecting the air duct system to ensure proper cold air circulation to the ice maker area. It helps direct airflow for efficient ice production and freezer compartment cooling. Replace this part if ice production has slowed, the ice box area is not staying cold enough, or the original adapter is cracked or missing.

Refrigerator warm but freezer cold? This damper control regulates airflow between compartments. Moderate DIY repair with video guidance available.

Replacement cover for your refrigerator. Installs to protect internal components or conceal mechanisms. Order if your original cover is cracked or missing.

Seals the freezer/icebox compartment to maintain proper temperature and reduce frost buildup. Replace if seal is torn, loose, or causing moisture intrusion.

A replacement icebox rear gasket that seals the freezer compartment to help keep cold air in and reduce moisture intrusion. Restores the door seal to help maintain proper temperature and reduce frost buildup. What it does

• Seals the icebox/freezer door edge to maintain cold compartment temperature.
• Helps prevent warm air and moisture from entering, reducing frost and ice buildup.
• Can improve cooling consistency and help reduce excessive run time caused by a poor seal.
• Common symptom fix: visible gaps, torn or deformed seal, or recurring frost around the door.

• One icebox rear gasket.

• Disconnect power to the appliance before replacing the gasket.
• Remove the old gasket, clean the door/frame sealing surface, and align the new gasket evenly.
• Press the gasket into the channel firmly; some models may require gentle warming or minor adjustment for a snug fit.

LED light module illuminates your refrigerator interior. Replace when lights become dim, flicker, or stop working entirely. Verify fit with your model.

Seals the fan housing to direct airflow and maintain proper cooling. Replace if worn or damaged to reduce air bypass and improve temperature consistency.

This refrigerator compartment wire harness restores reliable electrical connections to components in the fresh-food section. Replacing a damaged or heat-stressed harness helps resolve intermittent outages and ensures power and signals reach RC components as designed. What it does:

• Distributes power and control signals between the main wiring and refrigerator-compartment components
• Helps address issues like RC lights not working or intermittent/no power to fresh-food section components
• Replaces harnesses with broken conductors, overheated/browned insulation, corroded, or loose connectors
• Maintains correct routing to prevent pinched, shorted, or chafed wires

• 1 refrigerator compartment wire harness assembly

• Disconnect power before servicing; do not work on live circuits
• Note the original routing and take photos to match clip locations and connector paths
• Seat keyed connectors fully; do not force—verify pin alignment and locking tabs
• Avoid pinching the harness when reinstalling panels and covers; restore power and test operation