Room Air Conditioner Gasket & Seal

This door gasket is a flexible replacement seal that restores a tight refrigerator door seal to help keep cold air in and reduce energy loss. Designed to fit OEM specifications for a direct-fit replacement. What it does:

• Creates an airtight seal around the refrigerator door to help maintain consistent internal temperature
• Helps prevent frost buildup and reduces compressor run-time caused by air leaks
• Restores proper door closure for improved food preservation and energy efficiency
• Common symptom: visible gaps, damaged or cracked seal, or cold air leaking from the door

• One replacement door gasket

• Inspect mounting flange and channel for damage or debris before installing; clean surfaces for best seal
• Typical install requires removing the old gasket and seating the new gasket into the door channel; use gentle, even pressure to avoid overstretching
• If gasket is difficult to seat, warming it slightly with a hair dryer on low can improve flexibility (avoid overheating)
• Disconnect power only if required by your specific model's service instructions and follow all safety precautions

This 8 mm diameter gasket creates a tight seal where a small round-profile seal is required, helping prevent water or air leaks and keeping the appliance operating properly. It's a direct-fit replacement when the original seal is worn or damaged. What it does:

• Replaces a worn or torn round-profile gasket to restore proper sealing
• Helps prevent leaks of water, steam, or conditioned air in sealed connections
• Reduces drafts and moisture intrusion that can affect appliance performance
• Restores the original interface between mating parts for reliable operation

• One 8 mm diameter gasket

• Turn off power and water to the appliance before beginning work
• Clean the sealing surfaces and remove old gasket material before installing the new gasket
• Seat the gasket evenly around the mating surface; avoid stretching or twisting the seal

This 10 mm-diameter gasket provides a precise seal to prevent leaks and maintain proper operation of the appliance connection where it installs. Durable construction helps restore a tight, reliable seal. What it does:

• Creates a watertight/airtight seal at the mating joint to prevent leaks
• Helps maintain proper pressure and function of the connected component
• Replaces worn, cracked or flattened seals that can cause drips or loss of performance
• Restores reliable sealing to reduce cycling or moisture-related issues

• Disconnect power and shut off water supply before starting any repair
• Inspect mating surfaces and clean away residue to ensure a proper seal
• Replace the old gasket fully; do not stretch excessively when installing
• After installation, restore power/water and check the connection for leaks

This 8 mm diameter gasket creates a reliable seal in appliance assemblies to help prevent leaks and loss of pressure or airflow. It's a small replacement part that restores proper sealing where a worn gasket is causing issues. What it does:

• Seals joints and connections to help prevent water or air leaks
• Restores tight fit where a cracked, brittle, or flattened gasket allows seepage
• Reduces vibration noise from loose or poorly sealed parts
• Helps maintain proper operation of the sealed compartment or fluid path

• One 8 mm diameter gasket

• Disconnect power and water supply (when applicable) before servicing the appliance
• Remove old gasket and thoroughly clean mating surfaces before installing the new gasket
• Ensure the gasket is fully seated and aligned along the entire contact surface for an effective seal

A small circular rubber gasket designed to provide a reliable seal where a 8 mm diameter gasket is specified. Helps prevent air, moisture, or dust from passing through a joint or opening in the appliance. What it does:

• Creates a tight seal around shafts, openings, or mating surfaces to reduce leaks and drafts
• Cushions and protects components from vibration and wear
• Helps maintain correct airflow or pressure paths inside the appliance
• Common replacement when a worn or cracked seal causes unwanted noise, moisture, or air loss

• One 8 mm diameter gasket

• Inspect mating surfaces and clean thoroughly before installing the new gasket
• Replace only with the exact gasket size specified for your appliance to ensure proper sealing
• If adhesive or a retainer is used, follow the appliance manufacturer's instructions for secure attachment
• Disconnect power or follow appliance safety procedures before servicing

This molded form gasket provides a replacement seal designed to restore a tight closure and reduce air or water leakage. It helps maintain proper appliance operation by replacing a worn or damaged seal. What it does:

• Seals the mating surface to prevent air or water from leaking out
• Helps reduce frost build-up or moisture-related pooling when the seal is compromised
• Restores door/compartment closure where a deformed or torn gasket allows gaps
• Commonly replaced when gasket shows visible cracks, gaps, or continual leaks

• Disconnect power and remove any stored items before replacing the gasket
• Clean and dry the sealing surface thoroughly to ensure a proper fit
• Align the gasket into the channel and press evenly; some trims may require careful seating along the entire edge
• Inspect surrounding trim and hardware; replace or tighten as needed for a complete seal

This replacement case/stool gasket seals the appliance case to help keep internal components secure and reduce gaps that can cause leaks, drafts, or noise. It restores a proper seal for reliable operation. What it does:

• Forms a flexible seal at the case/stool interface to block water, air, and debris
• Helps prevent visible gaps, rattling, and air or water leakage around the cabinet
• Restores proper alignment and cushioning between panels and components
• Reduces the chance of dirt buildup and related odors where the case meets the stool

• One gasket case/stool as shown

• Disconnect power (and water if applicable) before beginning any repair
• Remove required access panels or components to reach the gasket mounting area
• Replace by seating the gasket evenly into the channel; avoid stretching or twisting
• Use hand tools only; avoid sharp tools that can nick or cut the new gasket