Room Air Conditioner Touch Pad

Replacement touch pad for air conditioner control panel. Needed when original pad is worn, cracked, unresponsive, or buttons are faded or damaged.

This drive PWB supplies and regulates power to a driven component in your appliance, ensuring the motor receives the correct signals for smooth, reliable operation and restoring function when the original board fails.

• Provides regulated power and control signals to a motor or actuator
• Interfaces with the main control to manage operation
• On-board components help protect the circuit from faults
• Common symptoms of a failing board: motor won't run or is intermittent, only one speed works, erratic surging, or visible burn marks/clicking from the board area

• Disconnect power before servicing; verify no voltage is present
• Handle the board by the edges and avoid static discharge
• Photograph/document all connectors; transfer them one at a time
• Reinstall using original hardware; keep wiring clear of moving parts

This is the main electronic control board that manages all functions of the air conditioner, including compressor operation, fan speed, and temperature regulation. It receives input from the user controls and sensors to maintain the desired settings. Replace this board if the unit fails to turn on, does not respond to controls, displays error codes, or behaves erratically.

This electronic control board (main PCB) replaces the oven/refrigerator console's primary circuit board to restore control and user-interface functions. It provides the appliance's logic and power management so controls respond correctly. What it does:

• Serves as the appliance's primary logic/control circuit, managing buttons, displays, and timed cycles
• Can resolve symptoms such as unresponsive controls, blank or erratic display, or failure to start cycles
• Replaces a damaged or shorted PCB that may cause intermittent operation or consistent error indications
• Works with existing harnesses and mounts to re-establish electronic control signaling

• Disconnect all power (unplug or shut off breaker) before replacing the board to avoid shock or damage
• Handle the board by its edges and avoid static discharge; use an anti-static wrist strap if available
• Verify connectors align and seat fully; do not force plugs—match keyed harnesses

This electronic power control board manages the main electrical functions of the air conditioner, including compressor operation, fan speed, and temperature regulation. It receives signals from the user interface and directs power to the appropriate components. Replace this board if the unit fails to turn on, does not respond to controls, runs erratically, or displays error codes.

This is an electronic display board that shows temperature settings, mode selections, and operational status on a room air conditioner's front panel. It communicates user inputs from the touch controls to the main control board. Replace this board if the display is blank, shows incorrect readings, has flickering segments, or if the touch controls are unresponsive.

This is the main control board that manages the appliance's electronic functions and user interface, restoring normal control of cycles, displays, and timed operations. Replaces a failed or unresponsive control module to recover device control. What it does:

• Receives input from buttons/knobs and sends commands to motors, valves, heaters, and displays
• Controls timing, cycle selection, and system diagnostics for normal operation
• Resolves issues like unresponsive controls, no display, or incorrect cycle behavior
• Requires correct configuration and secure connections to function reliably

• 1 main control board (electronic control assembly)

• Disconnect power before service to avoid shock or damage
• Handle board by edges and avoid contact with components or circuitry
• Verify mounting, connectors, and wire routing match original before restoring power

This is an electronic input control board for a window or portable air conditioner. It processes signals from the touch pad panel and manages the unit's functions, including temperature settings, fan speed, and mode selection. Replace this board if the control panel is unresponsive, buttons do not register inputs, or the unit behaves erratically despite having power.

This electronic control board manages the operating functions of the air conditioner, including fan speed, temperature settings, and compressor cycling. It receives input from the control panel and directs power to the appropriate components. Replace this board if the unit does not respond to controls, displays error codes, fails to turn on, or behaves erratically.

This is a plastic enclosure that covers and protects the control panel area of a window or portable air conditioner. It houses the touchpad controls and helps keep internal wiring and components shielded from dust and moisture. Replace this part if the cover is cracked, broken, or missing, which can expose sensitive electronics and affect the appearance and operation of the unit.

This control board kit manages your air conditioner's electrical functions, regulating temperature, fan speed, and operational modes. It processes input from the thermostat and user controls to maintain desired cooling levels. Install this kit if your air conditioner won't turn on, doesn't respond to temperature adjustments, or if the display is malfunctioning.