Dishwasher Roller Nut Parts
Genuine Ge part
By: Ge
Part Number: WD35X21039
Replace cracked or worn upper rack rollers that prevent smooth sliding. Kit includes studs and wheels for secure rack gliding. Fits GE dishwashers.
Do-It-Yourself Stories from Customers like You
Dishwasher top rack roller broken Timothy S. • Ossian , IN • May 31, 2015
Replaced roller as shown in appliance parts pros video. I am highly pleased again and with my exp experience with you. Parts are priced better than anywhere and the videos are the perfect for someone mechanically- challenged like I am.
Read more
More
$35.70
- Compare At:
-
$42.13
- You Save:
-
$6.43
Genuine Frigidaire part
By: Frigidaire
Part Number: 131302800
This vane screw secures the internal drum baffle (vane) to the drum, keeping loads turning properly and preventing rattles or snags. Replace a missing or stripped screw to restore a tight, stable baffle during cycles.
- Fastens the drum baffle/lifter (vane) to the rotating drum
- Helps maintain proper tumble and load turnover
- Common symptoms: loose or wobbly baffle, rattling or clunking noises, items catching on a raised baffle edge, or a baffle that detaches
- Visual cues: missing screw or stripped/damaged threads at the baffle mounting holes
What's included: One screw
- Disconnect power before servicing; shut off gas
- Access the baffle from inside the drum; align holes and start the screw by hand to avoid cross-threading
- Tighten firmly but do not overtighten to prevent stripping the drum or cracking the baffle
- Start all screws before final tightening to seat the baffle evenly
Do-It-Yourself Stories from Customers like You
The pump hose had a tear in it and the water hoses were in bad shape Steven V. • El Cerrito , CA • September 21, 2014
Unscrewed the front lower panel ( 2 screws ). Disconnected the pump hose clamp and removed the hose. I loosened the lower back panel and pulled out the drained hose from the rear. Replaced with new hose put back clamp and panels. Very easy
Read more
More
$17.95
- Compare At:
-
$21.54
- You Save:
-
$3.59
Genuine Whirlpool part
By: Whirlpool
Part Number: 4317933
Replace worn, broken, or missing lower rack rollers. This 4-pack includes white double roller attachments that snap onto your dishwasher's lower rack.
Do-It-Yourself Stories from Customers like You
Broken roller on lower dishwasher basket Linda H. • Conyers , GA • July 25, 2014
Popped the old rollers off and snapped on new ones.
Read more
More
$29.48
- Compare At:
-
$35.08
- You Save:
-
$5.60
Genuine Whirlpool part
By: Whirlpool
Part Number: W10917062
This drive coupling connects the motor shaft to the blender jar. Replace if worn, stripped, or cracked to restore proper blade rotation and function.
Do-It-Yourself Stories from Customers like You
Drive coupler and coupling both on blender and blender jar, were chewed up by using hot stuff in blender. Which we should have not done. Joseph F. • Turnersville , NJ • October 11, 2018
Just ordered blender jar coupler and blender motor coupling and now works fine and like new.
Read more
More
$12.95
- Compare At:
-
$15.54
- You Save:
-
$2.59
Genuine Bosch part
By: Bosch
Part Number: 00423896
This metric M4 x 8 screw secures the toe-kick/lower access panel at the base of the appliance. Replace a missing or stripped fastener to keep the kickplate tight and aligned, helping prevent looseness and noise.
- Secures the toe-kick or lower access panel to the base/frame
- Restores proper fit when the original screw is lost or damaged
- Helps reduce panel rattles and vibration
- Maintains correct alignment and clearance at the bottom edge
What's included: One M4 x 8 screw Install notes:
- Disconnect power before servicing; also shut off the water supply
- Support the panel and align holes before threading the screw
- Start by hand to avoid cross-threading; tighten snugly—do not overtighten
- Verify size matches the original; replace matching hardware together if required by your model
Do-It-Yourself Stories from Customers like You
I fell backwards & dishwasher door was open i won the battle! i have the bruises & bent hinges to prove it Kathleen O. • West Chester , PA • July 22, 2017
I went on your very user friendly website and looked up my bosch dishwasher. I love your diagrams and I felt confident that I could figure out what we possibly needed to get the door to close correctly and get the washer back working again. Your staff is courteous, service was fast and I would definitely recommend Appliance Parts Pros.
Read more
More
$12.16
- Compare At:
-
$13.38
- You Save:
-
$1.22
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304507405
Replacement dishrack roller for dishwashers. Attaches to the sides of the rack to allow smooth gliding movement. Replace when cracked, broken, or worn.
Do-It-Yourself Stories from Customers like You
Two front bottom rollers for the top rack were partly broken, and the rack kept coming off the rollers. George W. • Westminster: , MD • April 04, 2014
Unscrewed the old rollers one at a time, and screwed in the new ones. Couldn't have been simpler. Why did I put it off for so long?
Read more
More
$26.95
- Compare At:
-
$32.07
- You Save:
-
$5.12
Genuine Ge part
By: Ge
Part Number: WD12X10278
White dishwasher lower rack roller axle. Replaces broken or worn axles that cause wheels to fall off. Snap-in design for easy installation.
Do-It-Yourself Stories from Customers like You
Dishwasher rollers had worn down and some were melted since they fell off into the heating element so the lower shelf door was constantly off its track Kara O. • Cincinnati , OH • February 15, 2015
We purchased both the roller studs and new rollers for all of the slots on the lower rack. They came two days later and I was able to easily click them into place and the lower rack now rolls smoothly and securely. I only wish I hadn't lived with it in the broken stage as long as I did - such an easy and affordable fix.
Read more
More
$9.24
- Compare At:
-
$10.16
- You Save:
-
$0.92
Genuine Whirlpool part
By: Whirlpool
Part Number: W10817436
This factory-spec screw secures panels and components in your appliance. Replacing a missing or stripped fastener restores a tight, rattle-free fit so parts stay aligned and operate as designed.
- Fastens brackets, panels, and internal components to their mounting points
- Maintains alignment and reduces vibration during operation
- Replaces missing, worn, rusted, or stripped hardware
- Helpful when you notice rattling, loose panels, gaps, or parts shifting out of position
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas supply if applicable
- Align the part being secured and remove any damaged hardware
- Hand-start threads to avoid cross-threading; tighten with the correct driver
- Do not overtighten; verify the assembly is secure and operates freely
Do-It-Yourself Stories from Customers like You
Wheel tub broken. Paul K. • Belleville , NJ • January 11, 2019
Replaced Wheel-Tub.
Read more
More
$8.72
- Compare At:
-
$9.59
- You Save:
-
$0.87
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303943103
Set of 8 screws and washers.
Do-It-Yourself Stories from Customers like You
Busted top rollers stubborn washers Petra S. • Westminster , CO • August 31, 2015
Dishwasher worked fine except the top rack would keep coming off the rails, could see the rollers needed replacement. Washer is 10 years old, and in that time the rollers had become brittle and broken. At first tried to use old screw and washer, but washer was impossible to remove from screw as I have hard water and the calcium deposits seemingly cemented it. Order this screw and washer set and within 5 minutes of getting easily replaced the old rollers. The video was very helpful, as was the...
Read more
More
$16.90
- Compare At:
-
$18.59
- You Save:
-
$1.69
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268713
Replaces damaged dishwasher dishrack wheel assembly. Installs on upper or lower rack for smooth rolling. Needed when wheels crack or tabs break.
Do-It-Yourself Stories from Customers like You
Whirlpool dishwasher lower rack wheel assembly. Gregory Z. • Missoula , MT • March 01, 2019
Ordered wheel assembly. Received in a couple of days. Easy FIT project. Problem solved.
Read more
More
$52.68
- Compare At:
-
$62.16
- You Save:
-
$9.48
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10251051
This is a rack adjuster mechanism that mounts on the right side of the upper dish rack and allows you to raise or lower it to accommodate different dish sizes. It includes the adjuster housing and associated components that lock the rack into position. Replace this part if the upper rack no longer stays at the selected height, slides unevenly, or the adjuster mechanism is cracked or broken.
Do-It-Yourself Stories from Customers like You
Both adjusters were broken causing the basket to tilt downward as the it was extended in order to be loaded the more it was loaded the further it would tilt downward Mr M. • Reading , PA • June 18, 2016
I removed the basket, studied the old adjusters before removing them, and installed the new ones using some of the old parts(adjustment levers and the covers). adjusters work like a charm.. the only tool required was a screwdriver with removable torque bit.
Read more
More
$75.68
- Compare At:
-
$90.06
- You Save:
-
$14.38
Genuine Bosch part
By: Bosch
Part Number: 00612562
Replacement screw for dishwashers. Secures panels and internal components. Needed when original is stripped, missing, or damaged during repairs.
Do-It-Yourself Stories from Customers like You
Door screw holes were stripped Jackie V. • Evanston , IL • July 02, 2026
Bought the parts per the schematic AppliancePartsPros.com provided (which was super helpful). Installed them with the help of the videos and, boom, all fixed up.
Read more
More
$8.28
- Compare At:
-
$9.11
- You Save:
-
$0.83
Genuine Ge part
By: Ge
Part Number: WD12X332
Includes screws.
Do-It-Yourself Stories from Customers like You
Top rack on the dishwasher wouldn't stay attached. Sean E. • Bakersfield , CA • March 15, 2021
Replaced the upper rollers and the rack rollers along with new caps for the slide bars. Everything fit perfectly and it fixed the problem. A bit pricey but cheaper than a new dishwasher plus installation
Read more
More
$12.01
- Compare At:
-
$14.10
- You Save:
-
$2.09
Genuine Ge part
By: Ge
Part Number: WD2X320
This adjustable leg allows you to level your dishwasher and adjust its height for proper installation under countertops. It supports the dishwasher's weight while providing stability during operation. Replace this part if your dishwasher rocks during cycles, isn't level, or if the existing leg is stripped or broken.
Do-It-Yourself Stories from Customers like You
Dishwasher wasn't draining correctly. Andy S. • Pleasanton , CA • September 18, 2021
After reading all the systems on this site. It made it pretty easy to diagnose the problem. The part came in and slapped it in within a few minutes. Ran it and made my wife happy. She was under undue stress without her dishwasher and now I am her superman! Will order again from you. Part arrived quickly and the info you provided really saved me a ton of money! Seriously thank you.
Read more
More
$10.95
- Compare At:
-
$13.03
- You Save:
-
$2.08
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002106
Replacement roller wheel for dishwasher rack mounting strips. Installs on the rack assembly to help it glide smoothly along the tub tracks. Order when broken or worn.
Do-It-Yourself Stories from Customers like You
Upper rack of dishwasher was not pulling out smoothly Douglas L. • Bellaire , TX • March 03, 2015
Ordered new frame, wheels and SS slide for the bad side. Job was done in 10 minutes and the rack now works smoothly.
Read more
More
$16.95
- Compare At:
-
$20.00
- You Save:
-
$3.05
Genuine Whirlpool part
By: Whirlpool
Part Number: W11614118
Replacement tub wheel that supports and guides the washer drum for smooth, aligned rotation. Replace worn wheels to reduce drum noise, rubbing and uneven spinning. What it does:
- Supports and guides the washer drum so it turns smoothly and stays aligned.
- Reduces friction between the drum and cabinet, helping prevent scraping or binding.
- Replace if the drum squeaks, drags, rubs, or wobbles during spin cycles.
What's included: One tub wheel. Install notes:
- Disconnect power and turn off water supply before servicing the appliance.
- Access may require removing the cabinet, front or rear panel depending on model.
- Inspect adjacent shafts, bearings and mounts for wear and replace if needed.
- Reassemble and test the washer after installation to ensure proper drum movement.
More
$14.45
- Compare At:
-
$17.34
- You Save:
-
$2.89