Dryer Bath Fan Light Socket Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 8009
Original Whirlpool light bulb, 40 watt.
Symptoms of needing to replace the light bulb include:
- Dimming or flickering light
- Complete lack of illumination inside the appliance
- Visible signs of damage or burnout on the bulb itself
Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.
Do-It-Yourself Stories from Customers like You
Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016
I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it...
Read more
More
$18.23
- Compare At:
-
$21.69
- You Save:
-
$3.46
Genuine Whirlpool part
By: Whirlpool
Part Number: Y303836
Dryer making rumbling noise or drying slowly? A worn blower wheel with a rounded center causes wobbling and poor airflow. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Very concerning loud thumping noise while running our dryer. William M. • Sudbury , MA • July 20, 2019
In the past, I replaced some electronic components on our gas dryer, the solenoid and the electronic ignitor, but the rest of the dryer looked more difficult to repair if needed in the future.
I was wrong.
I went unto AppliancePartsPros.com and watched some repair videos on dryers like mine that make big thumping sounds while drying. This happened when I googled my dryer model number in an attempt to find out is capacity, because I wanted our new dryer to have the same capacity.
I found out...
Read more
More
$21.46
- Compare At:
-
$27.20
- You Save:
-
$5.74
Genuine Whirlpool part
By: Whirlpool
Part Number: WP694089
The Blower Wheel is an OEM part for Whirlpool dryers. This component is crucial for the proper circulation of hot air within the dryer drum, ensuring efficient drying of clothes by directing airflow through the drum and out the exhaust.
Common causes of a bad blower wheel include accumulated lint and debris obstructing the wheel, physical damage from foreign objects, or general wear from prolonged use. A faulty blower wheel can significantly reduce drying efficiency and may cause the dryer to overheat.
Symptoms of a bad blower wheel include:
- Longer drying times for clothes
- Unusual noises during the drying cycle
- Overheating of the dryer
- Poor airflow from the dryer vent
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Will not tumble
-
Takes too long to dry
-
Noisy
See more...
Do-It-Yourself Stories from Customers like You
Broken blower wheel on dryer Mark B. • Independence , WV • April 12, 2014
I FOUND the website on t internet, found my part ordered it and watched the how to video ,repaired the dryer myself. Awesome Website.
Read more
More
$34.75
- Compare At:
-
$41.35
- You Save:
-
$6.60
Genuine Ge part
By: Ge
Part Number: WE05X20431
Illuminates your dryer drum for better visibility when loading and unloading clothes. Replace when burned out or flickering. Verify fit with your model.
Do-It-Yourself Stories from Customers like You
Light bulb in dryer Jeff P. • Bradenton , FL • September 03, 2017
It was an easy repair just screwed in. The ordering process and simple no hassle and got here fast! I will definitely order from you again
Read more
More
$15.21
- Compare At:
-
$18.10
- You Save:
-
$2.89
Genuine Whirlpool part
By: Whirlpool
Part Number: WP697772
Dryer making rattling noise or not heating properly? A cracked blower wheel disrupts airflow. Moderate DIY repair—requires panel removal and wrench work.
Do-It-Yourself Stories from Customers like You
Dryer was getting louder and louder finally it started vibrating horribly i pulled the bottom panel and the blower housing fan teeth were missing Anthony C. • Newton , KS • June 06, 2015
I wanted to avoid pulling the drum. Luckily, my blower was easily accessed by pulling the front bottom panel. A couple of sheet metal screws were all I needed to remove the fan housing cover. I knew the fan was on reverse threads, i.e. righty-untighty. As it spins it tightens so no need for a retaining nut. I took off a screw holding on the exhaust tube and wiggled it out. I found the broken teeth inside. With the tube out of the way I was able to slide a crescent wrench in back and place...
Read more
More
$49.51
- Compare At:
-
$59.41
- You Save:
-
$9.90
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22002263
Illuminates the dryer drum for better visibility when loading and unloading. Replace when bulb burns out or fails to light. Confirm fit with your model.
Do-It-Yourself Stories from Customers like You
Squeaky noise and not fully drying David H. • Santa Clarita , CA • September 20, 2019
Originally the dryer was squeaking a lot, so I purchased a new belt tensioner, but the original tensioner was an old-style no wheel tensioner, so that wasn't the source of the squeaking.
I saw a lot of lint had built up inside the unit where there shouldn't have been that much. So I viewed a few videos on the Appliance Pros site and saw that the rear wheel guides were the cause of the squeaking and the rear felt drum and blower housing seal needed to be replaced. The rear blower housing was...
Read more
More
$15.55
- Compare At:
-
$18.50
- You Save:
-
$2.95
Genuine Frigidaire part
By: Frigidaire
Part Number: 131775600
Dryer not drying or making loud noise? The blower housing assembly circulates hot air through the drum. Most DIYers complete this repair in under an hour.
Do-It-Yourself Stories from Customers like You
Drum stopped turning loud 60 hz hum from motor James S. • Winchester , TN • November 03, 2018
The very easy diagnosis was motor seizure. Because the machine is about a decade old, I decided to renovate most of the guts. My DIY project included replacing the motor, blower, drum bearing, belt, and door hinge. The end result is a functional dryer with no left-over parts.
Lack of parts and hardware challenged the effort. For example, the blower assembly did not have the slide capture for the motor. I had to use the old one which is showing its age. With the exception of the drum...
Read more
More
$105.33
- Compare At:
-
$125.34
- You Save:
-
$20.01
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304409888
The Terminal Block Kit is an OEM part for Frigidaire appliances, typically used for connecting house power to various electrical appliances like ranges and dryers. This kit includes includes screws, nuts, and a unique terminal block. It plays a critical role in the power supply system by providing a reliable connection point for the appliance's main power cord, preventing loose connections and potential electrical hazards.
Symptoms of a bad Terminal Block Kit include:
- Signs of burning or melting at the connection points,
- Flickering power or intermittent operation of the appliance,
- A burning smell from the appliance area.
Causes of terminal block failure often involve loose connections that can lead to arcing and overheating, improper installation, or general wear and tear that degrades the integrity of the electrical contacts.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Little to no heat when baking
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Turns out it is the control panel but the terminal block was broken as well Patricia R. • Calera , AL • April 16, 2015
We replaced the broken Terminal Block but have not yet replaced the Control Panel. Will purchase that part from you shortly.
Read more
More
$16.90
- Compare At:
-
$18.82
- You Save:
-
$1.92
Genuine Whirlpool part
By: Whirlpool
Part Number: W11497304
The Blower Wheel is an OEM part for Whirlpool dryers. It is essential for circulating air through the dryer's drum, helping to efficiently and evenly dry clothes by moving heated air past the tumbling laundry. This component is crucial for maintaining the performance and energy efficiency of your dryer.
Symptoms of a bad Blower Wheel include:
- Unusual noises, such as rattling or thumping, indicating a loose or damaged wheel.
- Reduced airflow, leading to longer drying times or clothes not drying completely.
- Excessive vibrations during operation, which can also affect other components.
Causes of a bad blower wheel can include physical damage from foreign objects hitting the wheel, wear and tear from regular use, or accumulation of lint and debris that unbalances the wheel.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Blower wheel had broken at the shaft William K. • Apopka , FL • April 04, 2014
I removed the front panel of the dryer and the metal cover over the blower wheel. Removed the lock ring and clamp. Removed the old wheel and placed the new wheel on the shaft. I thoroughly cleaned all the lint around the area and inside the front cover. I resealed the metal cover over the blower and reinstalled the front cover. Dryer works great. Easy fix, I spent more time thoroughly cleaning all the lint.
Read more
More
$60.52
- Compare At:
-
$72.02
- You Save:
-
$11.50
Genuine Whirlpool part
By: Whirlpool
Part Number: 33001790
Fix loud grinding noises in your dryer with a new blower wheel. This fan circulates air to dry clothes efficiently. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Lack of heat and long drying times Allan H. • Baroda , MI • March 06, 2016
Our Maytag gas clothes dryer was not drying like it should/used to and was making a lot of noise. After researching online I figured the vent was partially blocked and/or the blower wheel was bad. When I took it apart, the vent had very little lint in the lower elbow exiting the back of the dryer but the blower wheel was loose on the shaft and was missing the clamp. I cleaned out the vent and put a hose clamp on the blower wheel to tighten it to the shaft and tried it again. The noise was...
Read more
More
$35.95
- Compare At:
-
$42.78
- You Save:
-
$6.83
Genuine Frigidaire part
By: Frigidaire
Part Number: 134690800
Dryer not drying or taking too long? A worn blower wheel reduces airflow, causing poor drying performance. Moderate DIY repair in 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Noisy electric dryer on startup John B. • Wenatchee , WA • January 29, 2018
Disassembled dryer. Installed new belt, drum rollers, idler arm and blower.
Read more
More
$140.61
- Compare At:
-
$165.92
- You Save:
-
$25.31
Genuine Samsung part
By: Samsung
Part Number: DC67-00180B
Fix loud grinding or squealing noises from a broken blower wheel. Restores proper airflow in your dryer. DIY-friendly repair, typically 30 minutes.
This part fixes the following symptoms
-
Too hot
-
Takes too long to dry
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
Dryer was making loud rubbing noise Jennifer D. • Milton , GA • August 15, 2016
Did google search and found youtube diagnostic and repair video. Blower wheel was warped and rubbing on the cover. We ordered a new blower wheel and followed youtube instructions to install new blower wheel.
Read more
More
$145.95
- Compare At:
-
$172.22
- You Save:
-
$26.27
Genuine Whirlpool part
By: Whirlpool
Part Number: 56000
Fix no airflow or squealing dryer with this blower wheel replacement. Restores proper air circulation through drum and exhaust. Moderate DIY repair.
This part fixes the following symptoms
-
No heat or not enough heat
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Motor ran but drum would not turn dryer motor pulley on motor shaft was stripped i found metal shavings under pulley that is attached to motor shaft Ysidro M. • Mesa , AZ • January 25, 2015
Since finding out pulley on motor is factory installed, I had to order a new motor with new pulley on it. I could not remove old blower wheel from old motor, no matter how hard I tried so I had to purchase new blower wheel and new blower housing. I am super happy finding Appliancepartspros.com the prices, and my experience was great! I basically removed everything step by step, and then replaced with the new parts step by step. I had help by watching videos that were provided online before and...
Read more
More
$68.95
- Compare At:
-
$82.05
- You Save:
-
$13.10
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304513609
Dryer making loud rumbling or tapping noise? A worn or damaged blower wheel assembly is often the cause. Moderately difficult repair for most DIYers.
Do-It-Yourself Stories from Customers like You
Very noisy when turned on. Paul P. • Mendon , MA • October 22, 2022
I replaced the Blower Wheel Assembly.
Read more
More
$52.68
- Compare At:
-
$62.69
- You Save:
-
$10.01
Genuine Whirlpool part
By: Whirlpool
Part Number: W11602886
LED light module illuminates refrigerator and freezer compartments. Replace when lights go out or produce dim, flickering light. Verify fit by model.
Do-It-Yourself Stories from Customers like You
Light went out in freezer. Shirley B. • Dillsburg , PA • September 22, 2023
Put in new LED lighrt module you sent me
Read more
More
$32.64
- Compare At:
-
$38.84
- You Save:
-
$6.20
Genuine Whirlpool part
By: Whirlpool
Part Number: WPA3073101
Illuminates appliance interior. Replace when burned out or dimming. Verify wattage and base type match your model before ordering. Easy DIY fix.
Do-It-Yourself Stories from Customers like You
Bad refrigerator light socket Russell R. • Tulsa , OK • December 14, 2014
Dropped light panel by removing two screws with socket set. Unplugged two terminals and unclipped the light socket from the base. Then just clipped the new socket onto the base, plugged the connectors onto the terminals and remounted the base. Total job was less than 15 minutes.
Read more
More
$5.70
- Compare At:
-
$7.22
- You Save:
-
$1.52