Freezer Range/Range/Oven Surface Element Board Parts

This is the main electronic control board for an upright freezer. It processes input from the touchpad controls and manages the freezer's temperature regulation, defrost cycle, and display functions. Replace this board if the freezer display is unresponsive, shows error codes, fails to maintain the correct temperature, or the controls do not respond to input.

This electronic control board includes the user-facing touch pad display panel and the circuit board that manages freezer temperature settings and functions. It mounts on the exterior of the freezer compartment and allows you to adjust temperature and other settings. Replace this board if the display is blank, unresponsive, shows error codes, or if the freezer is not maintaining the correct temperature despite other components working properly.

Fixes frost buildup on evaporator coils causing warming or ice accumulation. Test with multimeter for continuity. DIY-friendly repair component.

Fixes frost buildup and warm freezer temps. This defrost heater melts ice on evaporator coils to restore cooling. Moderate DIY repair, 1-2 hours.

Frozen drain line causing water leaks? This defrost drain heater probe prevents ice buildup in the drain tube. Moderate DIY install requires patience.

This main electronic control board manages the freezer's key functions including temperature regulation, defrost cycles, and compressor operation. It is mounted behind the control panel and connects to the temperature sensors, compressor relay, and user interface. Replace this board if the freezer is not maintaining proper temperature, displays error codes, runs continuously without cycling off, or if the controls are unresponsive.

Freezer won't turn on or control panel is unresponsive? This electronic control board manages all freezer systems. DIY install in 10-20 minutes.

This is the electronic control and display board inside your standalone freezer that lets you set the temperature, view the current temperature, and manage settings like fast freeze. It processes your inputs and communicates with the other components to maintain the correct temperature. Replace it when the display is blank or flickering, buttons are unresponsive, or the freezer is not maintaining the temperature you've set.

Electronic control panel touch pad for upright freezers. Mounts on the front door. Replace if buttons are stuck, unresponsive, or the display is damaged.

If your refrigerator won't cool, runs constantly, or has erratic temperature control, the main control board may have failed. Regulates all functions.

This defrost heater assembly mounts near the evaporator coils inside the freezer compartment and generates heat to melt frost buildup during the automatic defrost cycle. It keeps the evaporator coils clear so the refrigerator can cool efficiently. Replace this heater if you notice excessive frost buildup in the freezer, the refrigerator is not cooling properly, or the defrost cycle is not functioning.

This is the electronic control board that governs the appliance's cooling system. It interprets sensor input and user settings to run key components, helping maintain consistent temperatures when the original controller becomes faulty or erratic.

• Monitors temperature sensor feedback and executes cooling cycles to hold the selected setpoint
• Controls major components on applicable models
• May manage additional functions like defrost timing or alarms depending on model design
• Failure can present as warm or unstable temperatures, unit not starting, short-cycling/running constantly, or unresponsive temperature adjustments

• Disconnect power before service; observe ESD precautions and handle the board by its edges
• Note wire/plug locations; transfer connectors to the new board one at a time
• Secure the board in its mounting and ensure all harnesses are fully seated
• Reassemble covers/panels before restoring power and checking operation

Electronic control board with integrated touch pad for freestanding freezers. Replaces failed boards with unresponsive buttons, cracked touch panels, or damaged controls.

This is an electronic control board that mounts inside the freezer or refrigerator compartment and regulates temperature, defrost cycles, and other system functions. It receives input from thermistors and sensors to manage compressor and fan operation. Replace this board if the unit is not cooling properly, displays error codes, runs constantly, or fails to maintain the correct temperature.

This electronic control board is the freezer's central control module. It processes sensor inputs and user settings to run the cooling system and alerts. Replacing a failed board helps restore reliable operation and accurate temperature management. What it does:

• Controls compressor and evaporator fan operation to maintain the set temperature
• Interprets thermistor input and applies control logic to regulate cooling
• Coordinates features such as alarms and, on electronic models, defrost cycles
• Common symptoms include the unit not running or powering up, warming or unstable temperatures, unresponsive or erratic controls/display, or excessive frost buildup

• Disconnect power before servicing; handle the board with ESD precautions
• Access the control housing, note wire locations, and transfer connectors one at a time
• Secure the replacement board and reuse original mounting hardware and any reusable trim/overlay as applicable
• Restore power, set temperatures, and allow up to 24 hours for stabilization

Restore accurate cooling and responsive controls with this Electronic Control Board. It monitors sensors and user settings to manage your freezer's key operations so the unit reaches and maintains the temperature you choose.

• Regulates cooling by commanding the compressor and evaporator fan to maintain set temperature
• Interprets thermistor and keypad inputs to execute temperature changes
• Coordinates defrost timing and temperature alarm functions on applicable models
• Symptoms it may address: not cooling or overcooling, runs constantly or won't run, erratic/inaccurate temperature display, beeping alarm, unresponsive buttons or display

• Disconnect power before servicing; handle the board by its edges and use ESD protection
• Note/photograph wiring before removal; transfer any reusable mounting brackets or covers
• Ensure all connectors are fully seated and locked
• After installation, set your desired temperature and allow up to 24 hours for temperatures to stabilize