Range / Cooktop / Oven Switch Action Control Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 316436001
Burner won't turn off or stuck on high? This surface element switch controls heat settings for large burners. Moderate DIY with panel removal.
This part fixes the following symptoms
-
Won't start
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
The front left element (8 inch) would stay hot on lower control settings. Michael S. • West Seneca , NY • September 13, 2022
After an internet search, the likely problem was a faulty "Element Switch.." I actually unplugged the stove and removed the switch (I did NOT disconnect the wires). I obtained the part number on the switch, disassembled it, observed that the contacts were highly degraded, reassembled the switch and reinstalled it back into the stove. This all provided confidence the SWITCH was faulty.
One switch on the AppliancePartsPros.com website (AP2591804) looked exactly like the switch in the stove...
Read more
More
$47.41
- Compare At:
-
$56.42
- You Save:
-
$9.01
Genuine Ge part
By: Ge
Part Number: WB24X25013
Fix burners stuck on high or won't adjust temperature with this infinite control switch. Controls dual-element burner heat settings. 30-min DIY fix.
Do-It-Yourself Stories from Customers like You
Dual electric burner. We could not control temperature, suspected the burner switch was bad. Gary L. • St Louis , MI • February 23, 2021
I got online and found AppliancePartsPros.com. I found others had the same problem, and
had replaced the switch, with my model number your rep got me the exact switch
and a video on how to change it. It took approx 15-20 min . was very happy with the
service, will use again in future if needed.
Gary
Read more
More
$42.58
- Compare At:
-
$50.67
- You Save:
-
$8.09
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3149400
Burner stuck on high or won't heat properly? This surface element switch controls your range burner temperature. Simple 15-minute DIY fix.
This part fixes the following symptoms
-
Won't start
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
The burner on my electric stove was "running wild" (not controlling temperature correctly) James S. • South Abington Township , PA • June 22, 2014
The fix was to replace the infinite control switch on my Whirlpool range. A simple task.
Read more
More
$56.34
- Compare At:
-
$66.48
- You Save:
-
$10.14
Genuine Ge part
By: Ge
Part Number: WB24T10025
Burner stuck on high or won't heat? This 8-inch infinite switch controls heat output on electric ranges. Simple 20-30 minute DIY replacement.
Do-It-Yourself Stories from Customers like You
The heating element where boiling hot at any seting of the knob Christopher H. • Lawrence , KS • August 17, 2014
I replace the Infinite Switch and that seems to be the trick for keeping the temperture under control.
Read more
More
$39.95
- Compare At:
-
$47.94
- You Save:
-
$7.99
Genuine Ge part
By: Ge
Part Number: WB27X45466
Fix F2 error codes, dead oven display, or overheating issues. This oven control board manages temperature and cooking modes. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Oven control board failed to work after oven light shorted Glenn S. • Fairfax , VA • October 28, 2014
Replaced control board myself. Easy.
Read more
More
$151.95
- Compare At:
-
$179.30
- You Save:
-
$27.35
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10434452
The Dual Element Control Switch is an OEM part for Whirlpool ranges and cooktops. This control switch is designed for models with dual heating elements, allowing you to adjust the size of the heat output on the LF element depending on whether you are using the inner or outer element.
Causes of a bad Dual Element Control Switch can include electrical issues such as short circuits or worn contacts, physical damage to the knob or switch mechanism, or problems with the internal components that regulate power.
Symptoms of a failing Dual Element Control Switch include:
- Inability to change between the inner and outer elements
- Irregular heating or lack of response when adjusting the temperature
- The switch feeling loose or not engaging properly
- Burner not heating even though the switch is turned on
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Large front burner stayed on high power. Lou G. • Mansfield , TX • October 12, 2019
Watched the attached video, then followed directions and installed the part ordered.
Read more
More
$78.95
- Compare At:
-
$93.95
- You Save:
-
$15.00
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3149404
Burner stuck on high or won't regulate temperature? This infinite switch controls top burner heat settings. Straightforward DIY fix, 15-30 minutes.
Do-It-Yourself Stories from Customers like You
Burners were working correctly most of the time but would stay in the on position (high )periodically and would not shut off automatically for the temperature you set the burner for Daryl B. • Gloucester , VA • August 12, 2021
Replaced the burner Infinite switches for the burners having the issue. Here are the latest part numbers for this model Maytag. Left rear (LR) and right rear (RR) burners are both 6" and use the same switch. Part # WP3149404. Left front (LF) is an 11 1/2" burner Part# W10167742. The right front (RF) burner is a double burner 6" center and 9 1/2" outside burner Part #WPW10149355. Very simple repair. Unplug the stove, remove the rear panel, remove the switch knob, remove the 2 switch screws,...
Read more
More
$52.68
- Compare At:
-
$62.69
- You Save:
-
$10.01
Genuine Ge part
By: Ge
Part Number: WB24T10029
Burner won't adjust temperature or stuck on high? This surface burner control switch restores heat control. Quick 10-minute fix with basic tools.
Do-It-Yourself Stories from Customers like You
Large dual burner Frederick E. • Athens , AL • September 19, 2014
Stove is a GE Adora Model JBP63HH2bb. It took me forever to figure out how the burner was attached to the rails.
My glass top was different than any instructions found on the internet for changing out a burner. The burners on this one are held to the bottom of the glass cook top by two rails that cross the bottom of the burner assemblies. In order to get too the burners you must remove 4 Phillips screws to lower the rails and burners from the cooktop. I suggest two people do this because...
Read more
More
$50.57
- Compare At:
-
$59.67
- You Save:
-
$9.10
Genuine Frigidaire part
By: Frigidaire
Part Number: 316436000
Burner stuck on high or won't heat? This surface element switch controls temperature for electric range burners. DIY repair in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Surface switches not operating properly; going from cool to very hot etc Guy G. • Guthrie , OK • October 10, 2014
Replaced all four element switches. Switches arrived within two days of ordering. That's about normal for AppliancePartsPros. They were the correct ones; not generic, and fit the original control knobs perfectly. This kind of service is what I'm used to from ApplicanePartsPros.
Read more
More
$60.52
- Compare At:
-
$71.41
- You Save:
-
$10.89
Genuine Ge part
By: Ge
Part Number: WB24X829
The Microwave Door Switch is an OEM part for GE microwaves, designed to prevent the microwave from operating when the door is open by interrupting the power whenever the door is not securely closed. The door switch is an essential safety feature.
Symptoms of a failing Microwave Door Switch include:
- The microwave not starting or heating
- Running when the door is opened
- Unusual noises when the door is closed
Causes of a bad Microwave Door Switch can result from repeated opening and closing of the door or slamming that can cause the switch to degrade or become misaligned, leading to intermittent or failure.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
This part fixes the following symptoms
-
Doesn't shut off
-
No heat
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Ge microwave ran when turned off if door was shut Jason A. • Cary , NC • April 02, 2017
The first symptom was our microwave would continue to run after the time was up. The light would go out, the turn table would stop but you could still hear the microwave running and whatever was in it would continue to cook. The only way to stop it was to open the door. It was intermittent at first but eventually it would always run no matter what as long as the door was closed. Several other posts referenced these switches as the problem. I just replaced both and problem gone. It turns out...
Read more
More
$38.28
- Compare At:
-
$45.17
- You Save:
-
$6.89
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304518660
The Clock is an OEM part for Frigidaire ovens and ranges. It is the central electronic component that regulates and monitors oven functions such as bake, broil, convection, temperature controls, and timers.
Causes can be failures in the integrated circuitry, damaged connectors or traces on the board, or water or other environmental damage over time.
Symptoms of a clock include:
- Failure of oven elements to heat properly
- Unresponsive or inaccurate temperature displays
- Irregular timed baking or errors flashing
- Problems with convection or baking modes
- Power issues such as the oven not turning on
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Bake element and broil element did not heat Larry H. • Kansas City , MO • November 25, 2016
I first felt along each heating element (bake and broil) hoping to find a rough or blistered place on them. But they were both smooth with no irregular places. (replacing the elements would have been the easiest and cheapest repair.
Pulled the back off the range (unplugged, of course) - checked wiring. There were no loose connections or burned wiring. I disconnected the elements and checked them with a ohmmeter (VOM) and both had continuity. Discovered that both elements used the same...
Read more
More
$106.95
- Compare At:
-
$128.34
- You Save:
-
$21.39
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304518661
Fix F10 error code or oven that won't heat with this control board. Manages temperature, timer, and heating modes. Moderate DIY repair with video guide.
Do-It-Yourself Stories from Customers like You
My frigidaire gas range beeped incessantly with an f10 reading Charles C. • San Francisco , CA • October 22, 2014
I researched online and found that it was probably one of two things wrong: the heat probe or the control board (clock). Since the probe was less expensive, I ordered that on Appliance PartsPros. It arrived SO quickly, and with the repair video I easily replaced it. BUT... it still got the F10 reading. Sigh. So I found a local appliance repairman (I didn't want to replace a more expensive item if it turned out I was wrong). He was a good one: he listened to my story, said he was sure it was the...
Read more
More
$97.50
- Compare At:
-
$116.02
- You Save:
-
$18.52
Genuine Whirlpool part
By: Whirlpool
Part Number: W10820036
The Washer Door Switch is an OEM part for Whirlpool washing machines. This component is crucial for ensuring the washer operates safely by detecting whether the door is open or closed. The door switch prevents the washer from starting or continuing its cycle when the door is open, and it allows the machine to function only when the door is securely closed.
Symptoms of a failing Washer Door Switch include:
- The washer not starting or stopping unexpectedly during a cycle
- Error codes related to door closure issues displayed on the washer's control panel
- The washer door not locking properly or the lock mechanism not engaging
- The washer continuing to operate with the door open
Causes of a bad door switch can include wear and tear from frequent use, damage from repeated opening and closing of the door, electrical faults such as short circuits, or physical damage from mishandling or impact.
This OEM Whirlpool part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.
This part fixes the following symptoms
-
Will not drain
-
Pumps but will not spin
-
Timer will not advance
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
Sometimes the washer wouldn't start the wash cycle when the fill cycle was done it would just sit until the lid was picked up or bumped Eugene N. • Roswell , NM • August 28, 2016
The lid shut-off switch is located behind the lid How About That. I order the plastic ball the hold the lid in place plus the lid shut off switch. I watched the video that AppliancePartsPros.com has on how to replace the lid and the plastic balls. I removed the lid to get to the two philips head screws to remove that part of the shut-off switch. I took the new switch out of the package and compared it to the old switch. I assembled the switch just like the old switch look using the new...
Read more
More
$22.53
- Compare At:
-
$32.43
- You Save:
-
$9.90
Genuine Ge part
By: Ge
Part Number: WB24X10047
The Door Interlock Switch is an OEM part for GE microwaves. It ensures the safety of the microwave by preventing the appliance from operating while the door is open. This switch is part of a microwave's safety mechanism, which includes multiple interlock systems designed to stop the generation of microwaves immediately once the door is opened, thereby protecting users from exposure to microwave radiation.
Signs that it's time to replace your door interlock switch include the microwave not starting or stopping unexpectedly, the microwave continuing to operate with the door open, or a failure to heat food even though the appliance seems to be running.
Symptoms of a bad Door Interlock Switch include:
- Microwave does not start
- Microwave stops unexpectedly
- The microwave operates with the door open
- Microwave turns on but does not heat food
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
When a power up of any kind was selected timer or clock ran down but turntable or cook mode never started when door was moved a little it would start to work then stop research suggested door switch James D. • Smyrna , TN • December 28, 2014
Removed and replaced 3 door switches and mounting bar that holds switches plastic gets brittle with age and each switch comes out slightly different from each other, the chances of breaking a mounting pin is very easy. care should be taken when snapping mounting bar back into place to insure top latch and bottom latch locate properly insure bar is proper aligned when tightening screws their is free play in mounting bracket that could affect door properly engaging switches. NOTE that their are...
Read more
More
$42.26
- Compare At:
-
$50.71
- You Save:
-
$8.45
Genuine Lg part
By: Lg
Part Number: EBF62174907
Burner stuck on high or won't adjust temperature? This rotary switch behind the control knob regulates heat settings. DIY-friendly, 20-minute fix.
Do-It-Yourself Stories from Customers like You
The stovetop burner stopped working. Stephen E. • Apex , NC • September 19, 2021
Unscrewed the stove top, unplugged the connections, removed the stovetop. Replaced the burner and the switch. Put it back together again.
Read more
More
$93.95
- Compare At:
-
$112.74
- You Save:
-
$18.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3148953
If your range burner won't adjust temperature or stays on high, the infinite control switch likely failed. Direct plug-in replacement, 15-minute DIY fix.
Do-It-Yourself Stories from Customers like You
Couldn't control the heat on the big burner it intermittently got red hot (and stayed there) Fred S. • Emerald Isle , NC • March 26, 2016
I first diagnosed the problem by replacing the burner control (Infinite switch) with one from a smaller burner (one that I knew worked fine). That seemed to solve the problem. I ordered the correct control for the big burner on Saturday night, it arrived Tuesday and installed it in less than 10 minutes using only a Phillips screwdriver.
Remember to unplug the stove before performing any service. Take this time to clean around and under the stove. (You know it needs it!)
Read more
More
$57.39
- Compare At:
-
$68.29
- You Save:
-
$10.90