Refrigerator Tool Spark Module Parts

The amount of water being dispensed into the ice cube tray was excessive, causing overflow of the tray. The water then ran into the collection bin and even down the side walls of the freezer creating a huge block of ice in the bin, and ice all over the lower shelves as well. The excessive build up of ice caused the cube tray to crack and also split the little silicone water grommet that connects to the water delivery tube which directs water into the cube tray. Look out for that little tube... Read more

After searching for information, the best guess was a defrost problem, so I first fully defrosted and reset the ice maker (this is the recommendation of Samsung and others on the net). This did not fix the problem. Next best guess was water fill valve, but after removing ice maker from fridge, determined it had cubes in it but would not eject. So, finally decided to order replacement ice maker. If you search the next for this model (DA97-13178A) there are instructions for removal of the ice... Read more

After seeing the extensive list/pictures of repair parts available on your web site and really not knowing what parts needed to be replaced, I decided that it would be easier just to order a complete Ice Bucket Assembly. It took longer to open the box than it did to install the new Ice Bucket. And delivery was really quick too, about 4 days from order to delivery...that is service defined. I'll be back for any future repairs on my other appliances. Read more

After doing research on broken ice bucket for an LG refrigerator on numerous sites I became totally confused on all the different #s that showed up. Contacted AppliancePartsPros. I was assured they had the part needed. Part arrived perfect match. Took more time removing part from shipping box than installing. Part I ordered is mostly plastic so all the bubble wrap made sure it wasn't broken in transient. If I need to order more parts this is the go to site. Larry Read more

Removed ice maker and replaced it with new ice maker. Read more

I ordered a replacement ice maker and replaced the ice maker. it was really simple. one phillips head screw, a quick connect electrical connection, and a locking tab on the ice maker was all that it took to replace. Read more

Replaced old unit with new one Read more

After searching for the ice bucket & auger assembly online, I found several websites that said they had the right replacement assembly for my refrigerator. I ordered one from another website first, but when it arrived it was not the right size-it was too big. The company told me to return the assembly but they didn't know if they had the assembly I needed. So...back to the internet to search again. This time I came across AppliancePartsPros.com & searched on their website for the assembly. The... Read more

Got new ice maker from Appliance Parts Pro. Read more

Replaced the entire ice making unit. It was a very simple project. The original ice maker is held in place by two screws at the front and some tabs in the back. Removing the screws allowed the unit to come free from the tabs and drop down. We simply released the wiring clip, removed the broken unit and reversed the process. The repair took about ten minutes and is something I have never done before. I am guessing we saved over $100 by ordering from AppliancePartsPros.com and doing the job... Read more

Ordered new enclosure. Place ice maker into 'off' position. Remove ice tray assembly by pulling forward. Unscrew left hand side screw under old enclosure. Pulled broken part forward and up slightly. Unhooked wire harness from back of freezer. You can reach from underneath pulled out part. Or from top if you tilt rear of part down. Pull assembly out. Remove solenoid and motor. 4 screws each. Motor just needed plastic scarps removed. Remove auger drive fork (left hand thread = turn to... Read more

Utilizing the videos provided, I replaced it very easily. The videos were perfect and it took little or no time. Read more