Washer Push Button Start Switch Parts
Genuine Lg part
By: Lg
Part Number: 6601ER1006E
Washer not filling or overfilling? This water level pressure switch monitors water levels and signals when to stop filling. Easy 10-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Water filling when lg front loading machine off or empty lg washer model wm2487hrma Mark G. • Culver City , CA • December 20, 2019
The LG Model LG Washer model WM2487HRMA
ISSUE: Washing Machine was filling very slowly. Overnight it would fill about 1 or 2 gallons. I would clear the tub by pushing a) Power b) set spin to None c) push Start. That would empty the tub.
REPAIR SOLUTION: That did not solve the problem.
Second, I replaced both the single (1) Water inlet valve assembly
Part Number:5220FR2006H
and also the Water Level pressure switch Part Number:6601ER1006E
That solved the problem. I can't tell you which...
Read more
More
$71.95
- Compare At:
-
$85.62
- You Save:
-
$13.67
Genuine Ge part
By: Ge
Part Number: WH12X10334
Washer won't spin or agitate? This lid switch assembly detects if the lid is closed. Moderate DIY repair—front panel removal required. Video available.
Do-It-Yourself Stories from Customers like You
Would not spin or agitate Jason F. • Lebanon , CT • October 11, 2014
Replaced lid switch assembly
Read more
More
$33.95
- Compare At:
-
$40.06
- You Save:
-
$6.11
Genuine Ge part
By: Ge
Part Number: WE01X23599
Control knob for washer and dryer settings selection. Mounts on control panel. Replace if broken, cracked, loose, or missing for proper operation.
Do-It-Yourself Stories from Customers like You
Knob broke. Renee H. • Durham , NC • December 20, 2019
Once the knob came I just put it on. It works well.
Read more
More
$30.95
- Compare At:
-
$36.83
- You Save:
-
$5.88
Genuine Ge part
By: Ge
Part Number: WH1X2754
Replacement timer knob assembly for washers. Installs on the control panel timer shaft. Needed when original knob is cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
Broken timer knob Michael K. • Indialantic , FL • October 03, 2014
Easily replaced the knobs
Read more
More
$13.45
- Compare At:
-
$16.01
- You Save:
-
$2.56
Genuine Lg part
By: Lg
Part Number: EBF61674802
Fix DL error code or washer that won't start with this lid switch and lock assembly. DIY repair in about 20 minutes with basic tools and video guide.
This part fixes the following symptoms
-
Door latch failure
-
Won't start
-
Will not agitate
-
won't spin
See more...
Do-It-Yourself Stories from Customers like You
Lid lock stopped working Eugenio V. • Chicago , IL • February 26, 2016
Replaced it with the part I ordered from you guys. I had originally had LG come and check it out but they quoted me a price 250 plus tax. I said no way this little piece can cost 1/4 of the whole washing machine. So after finding your price, I you-tubed on how to replace it and I did in 20 min. Thanks youtube and thanks to you guys for such a great price on this switch assembly
Read more
More
$138.95
- Compare At:
-
$165.35
- You Save:
-
$26.40
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10514214
Fix FH error codes or washer overfilling with a new water level pressure switch. Simple DIY repair with video guide—takes about 5-10 minutes.
Do-It-Yourself Stories from Customers like You
F02 fail to drain repeated suds warnings John C. • Eagle River , AK • February 18, 2019
Prior to ordering parts I had pulled the pump strainer basket and cleaned it out. There was both soft and hard scale build up. The tub-to-pump hose was also pretty crusty/slimey. Still got warnings for SUDS and repeated F02 errors. Ordered parts and replaced the pump, tub-to-pump hose, interior drain hose and exterior drain hose (both hoses has some slime build up). The water standing in the tub when I emptied it the first time had very little suds but we kept getting the SUDS warning. ...
Read more
More
$104.42
- Compare At:
-
$123.22
- You Save:
-
$18.80
Genuine Whirlpool part
By: Whirlpool
Part Number: W10756270
The Knob Kit is an OEM replacement part for Whirlpool washing machines and dryers. Including a set of premium knobs color-matched to the appliance controls, this kit restores complete interfaces whenever old or damaged buttons need replacing. The kit includes 1 timer knob and 3 control knobs.
Causes for replacement involve normal wear from repeated touching during cycles as well as impact damage from falls or button presses gone awry over many years of service.
Symptoms necessitating a new knob kit include:
- Cracked, broken or missing buttons impeding normal operations
- Loosened knobs slipping out of holes or wearing partial turns
- Discolored faded markings obscuring switch positions
This OEM Whirlpool part is also compatible with Maytag, Amana, and other major brands.
Do-It-Yourself Stories from Customers like You
The timer knob stripped. Karen W. • Omaha , AR • January 24, 2022
After searching and watching videos, I determined that the only way to fix my dryer was to replace the entire timer. I also needed a new knob for the timer. Unfortunately, you can not purchase just 1 knob, you have to purchase a package that contains 1 of each of the knobs on the panel.
The repair was very easy! There was a video on the AppliancePartsPros website that showed exactly how to make the repair. You do not have to be an expert to make this repair.
Read more
More
$53.21
- Compare At:
-
$62.79
- You Save:
-
$9.58
Genuine Frigidaire part
By: Frigidaire
Part Number: 134844410
The Selector Knob is an OEM part for Frigidaire appliances designed for use on various models of washers and dryers. This knob enables users to select different cycles and settings, providing essential control over the appliance's operations.
Symptoms of a failing selector knob include:
- The knob failing to engage or change settings
- Difficulty in turning or a lack of resistance
- Visual signs of wear such as cracks or breakage
Causes of selector knob deterioration typically involve continuous mechanical use, accidental impacts, or exposure to harsh environmental conditions that can weaken the plastic.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Won't start
-
Touchpad does not respond
See more...
Do-It-Yourself Stories from Customers like You
Dryer knob was broken Karen H. • League City , TX • July 01, 2014
Replaced old knob with new knob
Read more
More
$55.30
- Compare At:
-
$65.81
- You Save:
-
$10.51
Genuine Ge part
By: Ge
Part Number: WH01X10060
The Selector Knob is an OEM part for GE washing machines. This knob is used to choose different wash cycles and settings on the control panel, allowing users to customize their laundry preferences. It is designed to fit securely onto the control shaft and provide smooth operation for selecting various options.
Over time, selector knobs can wear out or become damaged due to frequent use or accidental impacts. Causes of a bad selector knob can include cracked or broken plastic, stripped or worn-out internal components, or a loose fit on the control shaft.
Symptoms of a bad selector knob include:
- Difficulty in turning the knob or selecting settings
- Knob spinning freely without changing settings
- Knob falling off or feeling loose
- Visible cracks or damage on the knob
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken selector knob Philip O. • Gastonia , NC • June 01, 2014
I ordered a new knob and it arrived very quickly. The repair was simple and I will use appliance parts pros again should I need to. Thank you.
Read more
More
$21.95
- Compare At:
-
$25.90
- You Save:
-
$3.95
Genuine Speed Queen part
By: Speed Queen
Part Number: 806597
The Knob Assembly is an OEM component specifically designed for Speed Queen dryers. This assembly includes the control knob and integrated electronic components that allow for cycle and setting selection.
Causes of a defective knob assembly include normal wear of constantly rotated buttons, sun damage to exposed plastic knobs, and general use degradation of sealed electronic sensors over time.
Symptoms of a bad knob assembly include:
- Knobs or buttons that do not select cycles properly
- Faulty digital displays for time and settings
- Erroneous buzzers or error messages
- Unresponsive or stuck control functions
This OEM Speed Queen part is also compatible with products from American Dryer Corporation. Replacing the entire knob assembly restores full functionality to reliably control cycles on your dryer. Proper maintenance ensures long-term durability.
Do-It-Yourself Stories from Customers like You
Shaft broke off timer Mike B. • Owensboro , KY • August 10, 2025
New timer
Read more
More
$11.75
- Compare At:
-
$12.58
- You Save:
-
$0.83
Genuine Samsung part
By: Samsung
Part Number: DC97-16931B
The Dryer Knob Encoder Assembly is an essential component for Samsung dryers, ensuring precise control of your appliance's settings. This genuine OEM part guarantees a perfect fit and reliable performance, allowing you to easily adjust drying cycles and temperatures with confidence. Crafted for durability, the Dryer Knob Encoder Assembly enhances the functionality of your dryer by accurately translating knob movements into electronic signals, resulting in consistent and efficient drying results. Installation is straightforward, making it a convenient solution for restoring your dryer's performance without the need for professional assistance. Whether your original encoder is worn out, unresponsive, or damaged, this Dryer Knob Encoder Assembly provides a seamless replacement that maintains the quality and efficiency of your Samsung dryer. Improve your drying experience with this dependable part, designed to keep your appliance running smoothly and extend its lifespan.
Do-It-Yourself Stories from Customers like You
The washer set button knob broke. Philip R. • Shiloh , IL • July 31, 2022
Ordered a new knob and took out little bits of the old one. Took the new knob and pressed it over the stump and presto works like new.
Read more
More
$66.78
- Compare At:
-
$79.47
- You Save:
-
$12.69
Genuine Whirlpool part
By: Whirlpool
Part Number: W11675852
The Washer/Dryer Control Knob is an OEM replacement part for Whirlpool washing machines and dryers. This multifunctional knob allows for effortless navigation through various cycles, temperature settings, and customization options.
Causes of a bad control knob can include wear from repetitive turning over time, cracks developing from impacts or excessive stress, or loosened mounting fasteners compromising secure placement.
Symptoms of a bad control knob include:
- Difficulty distinguishing settings and cycles
- The knob spinning freely or falling off entirely
- Illegible markings confusing control selections
- Inability to manually operate washer/dryer programs
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken timer shaft on maytag dryer Clovis A. • Owls Head , ME • October 07, 2024
Swithching the timer was easy enough once I used the knob to keep the timer in place. The dryer’s wiring diagram was helpful.
Read more
More
$37.95
- Compare At:
-
$45.16
- You Save:
-
$7.21
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8181861
Replacement start button for washer control panels. Installs on the user interface. Replace if button is broken, cracked, stuck, or missing.
Do-It-Yourself Stories from Customers like You
The buttons were broke and the machine would not start Michael V. • Massapequa Park , NY • November 23, 2014
I purchased the parts from appliance parts pros and followed their repair video, to complete the repair myself. It took about 10 minutes, with complaining kids in the background. It was simple, and saved me a ton of money.
Read more
More
$58.43
- Compare At:
-
$70.12
- You Save:
-
$11.69
Genuine Ge part
By: Ge
Part Number: WH01X10088
Replace your washer's control panel button if it's cracked, broken, or missing. This snap-in component installs on the control panel face plate.
Do-It-Yourself Stories from Customers like You
The posh button was gone Steven B. • Ute , IA • April 17, 2015
All I had to do was remove 3, 1/4" screws from the back and take the front off. Two 5/16th screws hold the circuit board in place, remove them and press the button into the hole from the back. Replace the circuit board, slide the front back on and install the three 1/4" screws. Always unplug the washer first!
Read more
More
$20.41
- Compare At:
-
$24.49
- You Save:
-
$4.08
Genuine Ge part
By: Ge
Part Number: WH12X10065
Fix a washer that overfills or won't start the wash cycle. This water level pressure switch detects proper fill levels. DIY-friendly repair.
This part fixes the following symptoms
-
Will not fill with water
-
Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You
Bad switch Daniele H. • Milford , CT • February 12, 2015
Hmm...watched video after reading on web of running water problem with GE washer....common fail
.....moving stuff to get to the washer took all the time, easy fix but a lot of screws to remove and looking time
APP site very good, will order again if need be thanks
Read more
More
$55.30
- Compare At:
-
$65.25
- You Save:
-
$9.95
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3406108
The Door Switch is an OEM part for Whirlpool dryers. It is responsible for detecting whether the dryer door is open or closed. When the door is closed, the switch allows the dryer to operate. Conversely, if the door is open, the switch interrupts the electrical circuit to prevent the dryer from running, ensuring safety during use.
You should replace the door switch if it becomes faulty. Causes of a bad door switch can include wear and tear from regular use, electrical failures, or physical damage from repeated opening and closing of the dryer door. A malfunctioning door switch can prevent the dryer from starting or cause it to stop mid-cycle.
Symptoms of a bad door switch include:
- The dryer not starting or responding when the door is closed
- The dryer stopping mid-cycle without reopening the door
- The dryer continuing to run when the door is opened
- Error codes related to the door switch or door lock mechanism
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken door switch and lint filter cover Christopher W. • Collierville , TN • December 14, 2014
Plug and play minus a few screws to remove, simple repair.
Read more
More
$35.95
- Compare At:
-
$43.14
- You Save:
-
$7.19