Washer Push Button Start Switch Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10711289
The Knob is an OEM replacement part for Whirlpool washers and dryers. The control knob lets you control cycle settings. Remove the knob by pulling it straight off its post.
Causes of a bad knob can include wear and tear over time resulting in loose or unstable function, cracks or chips in the plastic housing, or damage due to impact or abuse during removal from the post.
Symptoms of a bad knob include:
- Difficulty rotating or selecting settings
- Settings that do not stay in place after selection
- Cracked or broken knob housing
- Knob constantly moving out of the desired setting
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer knob broke off. The timer was going out Steven J. • San Antonio , TX • June 17, 2023
I followed YouTube for instructions. Had a slight problem removing stems, but got it done.
Read more
More
$9.63
- Compare At:
-
$11.56
- You Save:
-
$1.93
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10558463
The Knob is an OEM replacement part for Whirlpool dryers. This part is what you turn to select different drying cycles, temperatures, or settings on your machine. The knob is designed to fit onto the dryer's control panel and is used for manual operation of the appliance.
Symptoms of a bad Knob include:
- Difficulty in turning or setting the knob
- The knob slipping or coming off the control panel
- Inability to select or change cycles
- Visible cracks or damage to the knob itself
- Causes for a deteriorating knob can be frequent use, which may lead to wear and tear, or accidental damage from impact or mishandling.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Timer shaft broke where knob went on. Brian R. • Santa Maria , CA • October 21, 2022
Removed and replaced the Timer. Very easy. Works great.
Read more
More
$55.30
- Compare At:
-
$65.25
- You Save:
-
$9.95
Genuine Ge part
By: Ge
Part Number: WH12X10531
Washer won't spin or agitate? A faulty lid switch prevents operation when the lid isn't closed. DIY-friendly repair, typically takes 10-15 minutes.
Do-It-Yourself Stories from Customers like You
Washer would not agitate or spin (bad lid switch) Lee P. • Sebring , FL • May 29, 2015
An online search of the problem (would not agitate or spin) indicated a bad lid switch. Then with model number was able to find an online video on how to change it. Next I opened the washer, like in the video (very easy) and made sure that the lid switch looked like the one I ordered from AppliancePartsPros.com. Of course with the model number it was easy to find the right part.
The part arrived in 2 days with no special shipping. What great service! Since, the washer was already open,...
Read more
More
$30.30
- Compare At:
-
$35.75
- You Save:
-
$5.45
Genuine Whirlpool part
By: Whirlpool
Part Number: WP207166
Washer won't start or keeps blowing fuses? The lid check switch ensures your washer only runs when the lid is closed. Easy DIY repair in under 30 minutes.
This part fixes the following symptoms
-
Will not fill with water
-
Will not agitate
See more...
Do-It-Yourself Stories from Customers like You
My washer stopped it just sttoped working Charles T. • Houston , TX • February 01, 2015
First I needed to replaced the timer. However that timer is no longer available. So I was not able to buy that part. A friend encouraged me to cross reference the part number. I did and I found another timer that claimed it would work on my machine. It looked very similar. I got the timer from you guys and put it in. The water valves worked right away but the motor did not. I researched more troubleshooting ideas and discovered I had a bad lid check switch. I got a new one of those from you...
Read more
More
$45.30
- Compare At:
-
$54.36
- You Save:
-
$9.06
Genuine Speed Queen part
By: Speed Queen
Part Number: 203843
Fix washer not filling, low water errors, or intermittent fill issues. This pressure sensor monitors water levels and signals the control board. DIY-friendly.
Do-It-Yourself Stories from Customers like You
Intermittent issues with the cold water fill Urrvano G. • Rochester , MN • January 03, 2026
I replaced both the solenoid (part of the inlet valve kit) and the pressure sensor. Online research suggested my intermittent issue with the cold water fill being just a trickle and then causing an error was likely due to one or both of those two parts failing. Since they are in the same spot it was suggested (and I agree) that it is best to replace both at the same time. The hardest and most frustrating part was getting the bracket back on with the two bottom tabs being in place. It took...
Read more
More
$18.38
- Compare At:
-
$19.62
- You Save:
-
$1.24
Genuine Frigidaire part
By: Frigidaire
Part Number: 134762010
Fix a washer that won't fill, overfills, or shows E35 error code with this water level pressure switch. Moderate DIY repair takes about 1-2 hours.
Do-It-Yourself Stories from Customers like You
E35 Michael B. • Mechanicsville , VA • September 13, 2016
Water valve not closing all the way. Water keep entering washer even with power cord unplugged. Parts I ordered fit perfect. Ordered on Thursday night , parts there Saturday. Great service and shipping. Thank
Read more
More
$42.95
- Compare At:
-
$60.39
- You Save:
-
$17.44
Genuine Whirlpool part
By: Whirlpool
Part Number: W10339251
Fix a washer that overfills, won't fill to the right level, or floods. This water level pressure switch monitors tub water. DIY install in 1 hour.
Do-It-Yourself Stories from Customers like You
Water level control wouldn't work Micheal W. • Millville , UT • April 11, 2014
I replaced it and the new one fit perfectly. reassembled and fired it up. Worked as desired, like new...
Read more
More
$130.95
- Compare At:
-
$155.83
- You Save:
-
$24.88
Genuine Ge part
By: Ge
Part Number: WH01X10313
Replacement control knob for washing machines. Installs on the control panel to select cycle and temperature settings. Needed when cracked or broken.
Do-It-Yourself Stories from Customers like You
Dryer was not heating on the timed dry side but heating on the other side of timer Iris H. • Canal Fulton , OH • February 22, 2015
Replaced the timer
Read more
More
$13.95
- Compare At:
-
$16.60
- You Save:
-
$2.65
Genuine Samsung part
By: Samsung
Part Number: DC96-01703C
Washer overfilling or not filling properly? The water level pressure switch controls fill cycles. Easy 15-minute DIY repair with our video guide.
This part fixes the following symptoms
-
Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You
Samsung clothes washer wa456 code ie u6 John D. • Howard Beach , NY • February 28, 2015
This error code indicated faulty water level and wash cycles were exhibiting either no water or too much water. Saw utube vid using this part for this type of problem and so far the repair is working well. Part arrived in 2 days, it was the right part and the machine is working the way its supposed to so I'm very happy. The worst scenario would have been to hire a repair guy to rip me off for a "Johnson Rod" I didn't need.
Read more
More
$90.95
- Compare At:
-
$109.14
- You Save:
-
$18.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001659
The Timer Knob is an OEM replacement part for Whirlpool dryers. It allows users to set cycle durations with smooth, intuitive adjustment.
Symptoms of a faulty timer knob include:
- The timer knob does not turn or is difficult to turn.
- The timer knob is missing
Causes of a bad timer knob can include loose or stripped internal gears from an extended operation or impact damage during loading/unloading clothes.
Note: This is the center portion of the knob only. For the complete knob assembly, the cap and skirt must also be purchased.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Doesn't shut off
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Broken knob James G. • Decatur , IL • November 16, 2014
It's working now
Read more
More
$29.48
- Compare At:
-
$34.79
- You Save:
-
$5.31
Genuine Ge part
By: Ge
Part Number: WH12X10498
Fix a washer that won't fill with hot or cold water. This rotary temperature switch controls water temperature settings. Easy 5-minute DIY repair.
This part fixes the following symptoms
-
No hot or cold water
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
No hot water would fill the washer in any cycle or temperature setting if the temperature setting was set to "hot" absolutely nothing would happen when turned on (cold washes worked fine) William H. • St Louis , MO • December 30, 2014
Replaced the water temperature selector switch. After watching a YouTube video for our GE top loading washer showing the switch replacement, I replace the switch in under 5 minutes! Very easy!
Read more
More
$18.95
- Compare At:
-
$22.55
- You Save:
-
$3.60
Genuine Speed Queen part
By: Speed Queen
Part Number: 803119P
This is a control knob for washing machines. This control knob is used to adjust the water temperature and level settings on the unit. It is manufactured out of a white plastic. The replacement is very easy and takes less than 15 minutes to complete. All that this process involves is pulling the old knob off and sliding the new knob on.A new control knob will be needed if the original is cracked, broken, or damaged in any way. Over time, the white plastic may begin to yellow, and the user may wish to replace the control knob for cosmetic purposes. If the knob is not actuating the desired cycle, it will need to be replaced.This control knob is a genuine SpeedQueen part and is an OEM part sourced directly from the manufacturer. It is sold individually. This specific control knob is compatible with washing machines that are manufactured by the SpeedQueen brand.
Do-It-Yourself Stories from Customers like You
The knob cracked because my wife thought she had to turn the thing way past the reset point Premier R. • Lindon , UT • October 12, 2015
Pulled the broken knob off and replaced it with the new one. Took about 10 seconds I think...maybe less.
Read more
More
$17.45
- Compare At:
-
$19.22
- You Save:
-
$1.77
Genuine Ge part
By: Ge
Part Number: WH11X10033
Replaces the cycle selector dial assembly on your washer control panel. Needed when the dial is cracked, broken, or won't turn properly with the timer.
Do-It-Yourself Stories from Customers like You
Control knob did not work Murphy P. • Jonesborough , TN • April 14, 2015
Replaced both the control knob, and the dial assm. the videos were great, I was getting ready to order the whole assembly. video saved me over 100 dollars. thanks.
Read more
More
$37.95
- Compare At:
-
$44.78
- You Save:
-
$6.83
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001908
Fixes washer that won't agitate, spin, or start. If your washer stops mid-cycle or won't run with lid closed, this lid switch kit restores operation.
This part fixes the following symptoms
-
Will not fill with water
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Washer would not turn on Anthony W. • Washington , DC • October 23, 2014
No water, no electricity, nothing happened when I pulled the on knob. I replaced the lid switch. The switch arrived at my house super fast - ordered on Friday and was there on Saturday. The whole replacement process took no time at all.
Read more
More
$46.35
- Compare At:
-
$55.62
- You Save:
-
$9.27
Genuine Ge part
By: Ge
Part Number: WE4X448
The Flame Sensor is an OEM part for GE dryers. This part detects the presence of a flame in gas dryers, ensuring that the gas ignites properly for safe and efficient drying.
Causes of a bad flame sensor can include regular wear and tear, carbon buildup from the gas flame, or electrical malfunctions.
Symptoms of a bad flame sensor include:
- The dryer not heating or taking longer to dry clothes
- The dryer shutting off unexpectedly during a cycle
- The igniter glowing but not igniting the gas
- Error codes related to heating or ignition issues
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Dryer heating for only a short time then no heat at all David N. • Fairfax , CA • December 08, 2018
GE Gas Dryer Model DBVH512GF1WW began to heat for only a short amount of time so drying clothes took WAY too long. Read online that the first thing to replace are the solenoids. Bought the two solenoids from AppliancePartsPros.com for about $50 total, and it seems to have fixed the problem. Had to watch a few videos to learn to disassemble the dryer, and the job took a couple of hours, but now that I know what I'm doing it could be done in less than 30 minutes.
Also, the old solenoids tested...
Read more
More
$78.41
- Compare At:
-
$93.31
- You Save:
-
$14.90
Genuine Ge part
By: Ge
Part Number: WH01X10314
Control knob assembly for washer timer/cycle selector. Restores secure grip when original is cracked, stripped, or broken. Attaches to timer shaft.
Do-It-Yourself Stories from Customers like You
The timer washer knob would not turn the dial assembly. Daniel H. • Deridder , LA • June 12, 2021
I replaced the Timer knob components. Removing the cover that contains the Timer was simpler than I anticipated. Just remove the screws on the top of the back of the machine. Hold the cover and lift up and push to the left (facing the front of the washer). Removed the Timer Knob Clip with small needle-nose pliers. Grasped the Timer and turned counterclockwise to remove and unplugged the wiring clip. The timer is seated to the cover and held securely in place with one screw. I seated the new...
Read more
More
$17.74
- Compare At:
-
$21.11
- You Save:
-
$3.37