Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Washer Drum Support Roller Parts

Best Seller
Washer Shock Absorber Kit
Genuine Lg part
By: Lg
Part Number: 383EER3001G

Replaces worn or broken shock absorbers that stabilize the drum in your washer. Installs at the base of the tub to dampen vibrations during spin cycles.

This part fixes the following symptoms
  • Shakes and moves
See more...
Do-It-Yourself Stories from Customers like You Worn out bearings   Linda B. • San Diego , CA • November 23, 2015

After watching the video carefully and taking notes for step-by-step dismantling of the LG washer, I took it apart methodically placing each item on a table in the order removed. I was able to remove and replace the bearings with no problems following the tips and tricks. The spider did not seem to be in bad shape but since I had a new one, it seemed reasonable to replace it as well, but it was difficult to extract the old one from the drum. The bolts are assembled with weld glue, so it is a... Read more

More
$54.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Suspension Rod Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: W10780044

Set of 4 suspension rods that support and steady the wash tub. Replace if rods are worn, broken, or causing excessive vibration during the spin cycle.

Do-It-Yourself Stories from Customers like You My 10 year old Maytag washer was knocking on the spin cycle   Michael A. • Keno , OR • December 04, 2023

I ordered a tub suspendion Kit for it. Read more

More
$100.55

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Rear Shock Absorber Kit
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304491700

Stabilizes the washer tub during spin cycles. Replace worn or broken rear shock absorbers to restore smooth operation and prevent drum contact with cabinet.

Do-It-Yourself Stories from Customers like You E21 water not pumping out fast enough (eiflw55hmb washer)   Helmut D. • Rancho Palos Verdes , CA • April 20, 2020

Replaced pump. All components are accessible from the front of the machine. You have to remove two screws in the back that hold on the top cover, then slide the cover back. This will allow access to the screws that hold on the control panel. Remove the control panel (unplug cable), then remove the spring/wire that holds on the door bellows to the front panel (removing and installing that is the most difficult part of the job) and carefully remove the bellows from the front panel. Then remove... Read more

More
$80.41

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Idler Pulley Wheel
Genuine Whirlpool part
By: Whirlpool
Part Number: WP40045001

Replaces a worn, cracked, or seized idler pulley wheel on your washer. This component maintains proper drive belt tension during wash and spin cycles.

Do-It-Yourself Stories from Customers like You The issue was a 10+year old Maytag washer wouldn't spin nor would the agitator move but the motor would run.   Wessley R. • Trinity , AL • July 28, 2020

Upon removal of the lower inspection panel on the front of the machine, my 20 year old son thought the motor was bad by the smell. But he did discover what turned out to be the belt tensioner pulley laying inside the machine. After he pronounced it dead, without a thought to the idler pulley, I looked at the machine and determined the lack of movement was due to the idler pulley having "fallen" off the shaft by looking at the illustrated parts break down provided on this website. Ordered the... Read more

More
$53.21

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Front Shock Absorber Kit
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304491701

Front shock absorber kit stabilizes the washer tub during spin cycles. Replace worn, loose, or broken dampers to restore smooth operation and stability.

Do-It-Yourself Stories from Customers like You Washer turned into a bucking bronco.   Anthony M. • Peyton , CO • May 23, 2020

I tore it apart using. YouTube videos to guide me and found the shocks were loose and floppy. I found the shocks in stock here and had them in my hand 2 days later for only $10 shipping! It runs great now! Read more

More
$169.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Drum Spider Assembly
Genuine Samsung part
By: Samsung
Part Number: DC97-15877B

Replaces a broken, corroded, or cracked drum spider assembly. This structural support connects the drum to the shaft in front-load washers.

Do-It-Yourself Stories from Customers like You Corroded/ pitted/ broken drum support spider axle   Lisa C. • Sumas , WA • December 20, 2015

I noticed my 5-year-old Samsung, front-loading washing machine started to sound like my kids were using it as a drum kit. I immediately checked it out and the stainless drum was wobbling so badly that I just took it for an unbalanced load of clothes. My gut was telling me that something was wrong because I had not remembered the machine being so loud before. I removed the clothes from the washer and I ran it empty to confirm my suspicions: the wobble was still there. I would say it had a 2"-3"... Read more

More
$250.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Shock Absorber Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: W10739670

The Shock Absorber Kit is an OEM part for Whirlpool washing machines. This kit includes 4 shock absorbers designed to reduce vibrations and absorb shocks during the washing and spinning cycles, providing stability and minimizing excessive movement of the washer drum.

Causes of a bad shock absorber can include wear and tear from regular use, exposure to heavy loads or unbalanced loads that put excessive strain on the absorbers, or damage due to impact or mishandling.

Symptoms of a bad shock absorber kit include:

  • Excessive shaking or vibrating during the wash cycle
  • Loud banging noises
  • The washer moving or "walking" during operation
  • Leaks due to increased stress on the tub and other components

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Washing machine was shaking vibrating   Victoria P. • Henderson , NV • February 11, 2016

I tube what could be the cause. Took apart the washer and ordered the parts. Put parts in. Read more

More
$188.73

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Strap
Genuine Whirlpool part
By: Whirlpool
Part Number: W11403873

The Strap is an OEM part for Whirlpool washing machines. It is a component located inside the washer tub that holds onto and spins the outer tub during the wash cycle. The strap washer plays an important role in securing the outer tub in place while continuously channeling rotational force to drive the washing action and clean clothes effectively. 

Causes of a bad strap can include wear and tear from years of use, damage due to impact or mishandling, or degradation from chemical exposure. 

Symptoms of a bad strap include:

  • Excessive vibration or shaking during spin cycles
  • Noise or grinding sounds coming from the washer tub area 
  • The outer tub wobbling or moving more than usual
  • Uneven agitation that fails to thoroughly clean all clothes

This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

More
$24.68

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Damper Assembly
Genuine Samsung part
By: Samsung
Part Number: DC97-05280W

The Washer Damper Assembly is an OEM replacement part for Samsung washing machines. This component is crucial for reducing vibrations and absorbing shock during wash and spin cycles, ensuring the washer operates smoothly and quietly. By stabilizing the drum, it helps prevent excessive movement that could damage other parts of the washer.

Causes of a bad damper assembly include wear from heavy or unbalanced loads, prolonged use, or damage due to impact. Over time, the dampers may lose their effectiveness, leading to increased vibrations and noise.

Symptoms of a bad washer damper assembly include:

  • Excessive shaking or vibrating during operation
  • Loud banging or thumping noises
  • Washer moving or "walking" across the floor
  • Uneven or incomplete spin cycles

This OEM Samsung part is also compatible with select Kenmore and other washer models.

Do-It-Yourself Stories from Customers like You My washer was unbalanced constantly during the spin cycle   Brian C. • Galt , CA • August 23, 2016

The AppliancePartsPros video on how to change a washing machine's suspension support rods was very helpful in this repair. It went without a hitch. Now the machine runs like new again and haven't the unbalanced error code since the repair. Read more

More
$58.33

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Drive Pulley Kit
Genuine Ge part
By: Ge
Part Number: WH07X10022

Replacement drive pulley kit for washers. Mounts on the motor shaft to transfer power to the drum via belt. Replace if worn, cracked, or wobbling.

Do-It-Yourself Stories from Customers like You Would not spin   Jason L. • Middletown , OH • August 30, 2019

Found the belt was thrown off. Reinstalled the belt and when doing so felt that the pulley was wobbling on the barrel shaft. Took the pulley off and noticed the inside of the pulley was worn badly and needed to be replaced. When received the new pulley and belt easily installed and was working like new. Read more

More
$124.64

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Damper Assembly
Genuine Samsung part
By: Samsung
Part Number: DC97-16350E

The Washer Damper Assembly is essential for maintaining the stability and performance of your Samsung washer. This genuine OEM part ensures reliable damping, reducing excessive movement during wash and spin cycles. By controlling the washer's motion, the assembly helps prevent noise and potential damage to your appliance. Designed specifically for Samsung washers, it guarantees a perfect fit and seamless integration with your existing system. Installing this suspension support rod restores the optimal balance and functionality of your washer, enhancing your laundry experience. Durable and built to last, the Washer Damper Assembly provides long-term peace of mind. Whether replacing a worn-out component or repairing a malfunctioning washer, this genuine OEM part is the ideal solution for maintaining your appliance's efficiency and reliability. Trust in quality and performance with the Washer Damper Assembly to keep your Samsung washer running smoothly.

Do-It-Yourself Stories from Customers like You Dc error code washer could not balance itself   Leah H. • George West , TX • May 12, 2015

After lots of research online and considering buying a new washing machine, I finally came across a repair story on here, appliancepartspros.com. Someone with a similar washer and the exact same problem replaced the rods in the washer. So for under $60, it was worth a shot. The rods we took out looked the same as the ones we put in, but once we replaced them, the washer worked perfectly and we haven't had a problem since. Delivery was fast and the instruction videos made replacing them quick... Read more

More
$92.23

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Shock Absorber
Genuine Samsung part
By: Samsung
Part Number: DC66-00343A

Washer Shock Absorber is essential for maintaining the stability and performance of your washer. This genuine OEM part is designed to absorb vibrations and reduce excessive movement during wash cycles. By effectively dampening shocks, it helps prevent unnecessary wear and tear on your appliance, extending its lifespan. The Washer Shock Absorber ensures smoother operation, quieter performance, and better overall balance of your washer. Compatible with a wide range of Samsung washer models, this part guarantees a perfect fit and reliable function. Easy to install, it allows you to restore your washerGÇÖs performance without hassle. If your washer is experiencing excessive vibrations or unusual noises, replacing the shock absorber with this genuine OEM part can resolve the issue efficiently. Invest in quality and reliability to enhance your washing experience with the Washer Shock Absorber .

Do-It-Yourself Stories from Customers like You Samsung front load washer shaking violently smell of burning rubber   Tongzhang J. • Carlisle , MA • October 05, 2015

Replaced broken drum spider and shaft assembly (part # AP4449265). Burning rubber smell was caused by spinning drum touches door boot seal. Also replaced all 4 shock absorbers just as a precaution. Replacing tub seal may not be absolutely necessary but it's cheap and easy. be aware of those razor sharp metal frames. Read more

More
$36.30

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Suspension Damper
Genuine Ge part
By: Ge
Part Number: WH03X29516

Stabilizes the washer tub during spin cycles. Replace if cracked, worn, or causing excessive vibration. Installs between tub and frame. Sold individually.

Do-It-Yourself Stories from Customers like You Un even spin cycle ge front load washer   Daniel S. • Cottage Grove , WI • December 27, 2025

Ordered 4 shock stabilizers found an excellent Utube video, my time, pretty easy fix. Read more

More
$27.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Suspension Rod Assembly
Genuine Lg part
By: Lg
Part Number: 4902FA1665W

Suspension rod assembly for washers. Installs to support the drum and absorb vibrations. Replace if worn, damaged, or causing balance issues during spin.

This part fixes the following symptoms
  • Shakes and moves
See more...
Do-It-Yourself Stories from Customers like You Was flashing an ( ue ) uneven code   Carl A. • Cleveland , OH • March 15, 2016

We had a repair man come and tell us the needed repair at the cost of 70.00 I ordered the parts and saved money. Read more

More
$35.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Suspension Rod And Spring Assembly
Genuine Ge part
By: Ge
Part Number: WH16X10141

Suspension rod and spring assembly for washing machines. Installs between the tub and cabinet frame. Replace when cracked, broken, or worn to restore stability.

Do-It-Yourself Stories from Customers like You Worn out shock springs allowing the drive shaft to rub the bottom of the cabinet with a full load   Richard C. • Monmouth , IL • February 27, 2015

I shopped around a bit - found one retailer that only had 1 shock in stock, another that only stocked the front shocks, etc. There is definitely a difference in the springs between the green colored and white colored shocks! I've torn this washer down before, so I'm fairly familiar with how it's put together. I've seen some of the You-tube videos on replacing this item, and some of the videos show far more disassembly than is required. I only removed the front, top, and controls, and... Read more

More
$34.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Shock Absorber
Genuine Frigidaire part
By: Frigidaire
Part Number: 137412601

Replacement shock absorber for front-load washers. Mounts between drum and base to dampen vibration. Replace if cracked, leaking, or worn out.

Do-It-Yourself Stories from Customers like You Moldy washer boot and wobbly spin cycle   Michael D. • Basalt , CO • April 08, 2026

New parts from Appliance Parts Pro were spot on, what a relief not to get into and have wrong parts. Really happy with speed of delivery and ordering process. Removed front cover, was able to access all 4 shocks from the front - time saver. Washer bellow and spring were a little bit of a finger buster, but after removing both bottom and top counter weights was super helpful. Using a 13MM socket to pinch the end of the shock absorber mounting pins was a great tip found here. Read more

More
$59.61

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google