Washer Timer Control Knob Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001664
The Timer Knob Insert is an OEM replacement part for Whirlpool dryers. This is a cap located on the timer knob on the control panel. Color: White. This is the timer knob cap only. For the complete assembly, you must also order the knob and skirt.
Causes of timer knob Insert failure can include cracked plastic from years of repeated turning motions. Wear on components also occurs due to extensive lifetime usage cycles.
Symptoms of a faulty timer knob insert include:
- Knob becomes loose, detached or inoperable for timings scrolling
- Cracks appear exposing internal timer parts
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken knob James G. • Decatur , IL • November 16, 2014
It's working now
Read more
More
$9.63
- Compare At:
-
$11.36
- You Save:
-
$1.73
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3953321
Fix a washer that stops mid-cycle or won't advance with this mechanical timer. Controls wash, rinse, and spin sequences. 10-20 minute DIY repair.
Do-It-Yourself Stories from Customers like You
Timer had gone out and lid switch as well William D. • Jamestown , CA • July 18, 2014
After opening the area where the timer was housed, I removed the old timer & replaced it with the new one. The repair was so easy we were back to washing clothes in 10 minutes.
Read more
More
$208.95
- Compare At:
-
$248.65
- You Save:
-
$39.70
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8181859
The Washer Control Knob is an OEM replacement part for Whirlpool washers.
Causes of malfunctions include stripped interior gears losing secure connection to circuit boards over hundreds of wash cycles. Repeated twisting motions can also crack fragile exterior ring structures.
Symptoms consist of:
- Refusal to rotate between settings
- Missing or faded graphics impairing readability
- Inability to start or stop washer cycles as needed
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
Color: Light gray used on platinum models. Measures about 1-2/3 inches in diameter. For blue order WP8181881. For dark gray used on pewter models order WP8182050.
Do-It-Yourself Stories from Customers like You
Stuck/broken start button Oladiran O. • Austin , TX • July 11, 2015
Googled it. Saw the YouTube video on replacing the User Interface module. Decided to try to fix this myself. Looked simple enough. Ordered the UI module. Saw the video on the replacement again.
Read more
More
$50.57
- Compare At:
-
$60.18
- You Save:
-
$9.61
Genuine Whirlpool part
By: Whirlpool
Part Number: W10807860
The Knob is an OEM part for Whirlpool washers. This part allows users to select and control the various wash cycles and settings by turning the knob to the desired position. It fits securely onto the washer's control shaft, providing an intuitive and reliable interface for managing the washing machine's functions.
Causes of a bad knob can include regular wear and tear, damage from repeated use, or breakage due to accidental impact.
Symptoms of a bad knob include:
- The knob not turning smoothly or becoming difficult to turn
- The knob slipping off or not staying securely on the control shaft
- Inaccurate or unresponsive cycle and setting adjustments
- Visible cracks, breaks, or wear on the knob
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Knob and timer knob Charles B. • Sioux Falls , SD • October 01, 2018
Watched the video and completed repair as shown
Read more
More
$52.68
- Compare At:
-
$62.16
- You Save:
-
$9.48
Genuine Ge part
By: Ge
Part Number: WH01X24376
Replacement button tree assembly for washer control panels. Restores reliable button function when selector buttons are missing, cracked, or unresponsive.
Do-It-Yourself Stories from Customers like You
Washer would not run or would not complete cycle Gary B. • Fenton , MO • December 09, 2025
Replaced button tree.
Read more
More
$10.53
- Compare At:
-
$12.64
- You Save:
-
$2.11
Genuine Ge part
By: Ge
Part Number: WH11X10047
Labeled control ring for your washer's control panel. Replace when the original dial becomes cracked, stripped, worn, or the cycle indicators are unreadable.
Do-It-Yourself Stories from Customers like You
The timer washer knob would not turn the dial assembly. Daniel H. • Deridder , LA • June 12, 2021
I replaced the Timer knob components. Removing the cover that contains the Timer was simpler than I anticipated. Just remove the screws on the top of the back of the machine. Hold the cover and lift up and push to the left (facing the front of the washer). Removed the Timer Knob Clip with small needle-nose pliers. Grasped the Timer and turned counterclockwise to remove and unplugged the wiring clip. The timer is seated to the cover and held securely in place with one screw. I seated the new...
Read more
More
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP661649
Fix a washer that won't spin, skips cycles, or stops mid-cycle. This timer controls cycle progression and power routing. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Washer would fail to complete spin cycles Robert H. • Alpine , TX • February 14, 2015
I started by replacing the lid switch without the desired result. So I decided to replace the timer unit. It works like a new machine at the moment. At least on the first trial load. More loads will convince me that it is fixed for sure. I cannot be more complimentary about Appliance Parts Pros as I live very remotely in West Texas. The part arrived quickly and it was the exact right part required as ordered. This is my second order and I will return for more parts if I need them.
Read more
More
$179.95
- Compare At:
-
$212.34
- You Save:
-
$32.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001025
Washer won't advance through cycles or skips steps? This timer controls wash, rinse, and spin sequences. Moderate DIY repair restores cycle operation.
Do-It-Yourself Stories from Customers like You
Washing machine would not agitate or spin Cherylann W. • Woburn , MA • January 06, 2015
The washing machine intermittently would not agitate or spin. A reset of the timer dial fixed it. Then nothing fixed it. Originally thought it was the timer but father wanted to check out other possibilities. So he brought his meter over and went through all that he could, including checking power to the motor below. All was good electrical-wise. On the holiday, January 1, a rep. at AppliancePartsPros assured me that if a new timer did not fix the problem, I could return the item, even...
Read more
More
$190.68
- Compare At:
-
$226.91
- You Save:
-
$36.23
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10251394
This is a control knob used on a dryer to select cycle settings or timer functions. It fits onto the control panel shaft and allows you to turn and select the desired drying cycle. Replace this knob if it is cracked, broken, or no longer grips the shaft properly, making it difficult to start or change dryer cycles.
Do-It-Yourself Stories from Customers like You
Selected knob broke. Gerald K. • Excelsior , MN • April 07, 2017
Ordered new knob. When it arrived I installed it in a few seconds.
Read more
More
$52.68
- Compare At:
-
$63.22
- You Save:
-
$10.54
Genuine Whirlpool part
By: Whirlpool
Part Number: W11116592
Fix a washer that won't advance cycles, starts on its own, or overfills with this electronic control board. Requires panel removal and wire connections.
Do-It-Yourself Stories from Customers like You
My Maytag washer was stuck on stupid! It wouldn't advance past sensing then it would overfill. David K. • Darby , PA • November 13, 2021
Put a new control board in and problem solved.
Read more
More
$260.29
- Compare At:
-
$294.04
- You Save:
-
$33.75
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10111389
Fix a washer that won't advance through cycles or gets stuck mid-wash. This timer controls cycle sequencing. Most DIYers complete this repair in 20 minutes.
Do-It-Yourself Stories from Customers like You
Bad timer Jrichard M. • Huntsville , AL • November 13, 2014
Ordered a new timer from Appliance Pros.com
Read more
More
$169.36
- Compare At:
-
$201.54
- You Save:
-
$32.18
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10177827
Fix a washer that agitates before filling or adds water after the final spin. This timer controls wash cycle sequences. DIY repair in 15-20 minutes.
Do-It-Yourself Stories from Customers like You
Washer machine timer failed would not add water before agitation started Robert B. • Rotonda West , FL • May 16, 2014
Found replacement timer at Appliances Parts Pros. Ordered on a Sunday (as all appliances fail on the weekend) and with expedited shipping got the part on Tuesday morning. Video from Appliance Parts was very helpful and entire replacement took less than 15 minutes. I also purchased a timer for a dryer earlier and had the same positive experience.
Read more
More
$227.29
- Compare At:
-
$270.48
- You Save:
-
$43.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10424308
The Push Button is an OEM part for Whirlpool Laundry Centers. This part starts the wash or dry process, and making adjustments to settings. The push button is engineered for durability and a precise fit, ensuring it integrates seamlessly with the appliance's control panel.
Causes of a malfunctioning push button can include repeated use leading to wear and tear, accumulation of lint or detergent residue affecting its functionality, or damage to the button's contacts or the control panel circuitry.
Symptoms of a bad Push Button include:
- Difficulty in engaging the desired cycle or setting
- The button feeling stuck or failing to return to its original position after being pressed
- The appliance not responding to button presses, resulting in an inability to start or modify cycles
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
A button was broke William L. • Broussard , LA • July 03, 2016
REPLACED IT
Read more
More
$16.95
- Compare At:
-
$20.34
- You Save:
-
$3.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22003993
The Dryer Timer Knob is an OEM replacement part for Whirlpool dryers. It allows users to set the drying time and cycle, providing control over the dryer's operation. This knob fits securely onto the timer shaft, and it allows for the selection of the desired drying cycle and time.
Color: White with Blue Trim
Cap Sold Separately
Over time, wear and tear, excessive force when turning, or accidental impact can cause the timer knob to crack, loosen, or lose its grip on the timer shaft. This makes it difficult to select and maintain accurate drying cycles.
Symptoms of a faulty Dryer Timer Knob include:
- Difficulty turning the knob to select the desired cycle
- Knob slipping or turning loosely
- Cracks, breaks, or missing parts
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Not heating dryer ran all night Cheryl R. • Temecula , CA • July 19, 2019
Watched the video and in 5 mins I was all done, very easy.
Read more
More
$29.48
- Compare At:
-
$35.08
- You Save:
-
$5.60
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001638
Fix a washer that won't agitate or advance through cycles with a timer replacement. Controls wash, rinse, and spin stages. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Washing machine quit agitating on normal cycle and only agitate on delicate Gary F. • Royal Palm Beach , FL • March 10, 2015
I called AppliancePartsPros and gave them the detail of my problem and that I thought that the timer may be bad. The guy on the phone with me talked to the technical group and came back and told me that they thought that it was the timer. The timer was ordered and the price was $50 cheaper then a local rep here at home. Anyway the part was ordered and came in less then 2 days and when I replaced it the problem was taken care of. The service, price, and time to get the part was great and I...
Read more
More
$258.36
- Compare At:
-
$310.03
- You Save:
-
$51.67
Genuine Samsung part
By: Samsung
Part Number: DC92-01621D
Fixes washer stuck in cycle, won't drain, or won't turn on issues. Restores automatic cycle transitions and water fill control. 15-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Error code e4 the washer stopped at the rinse cycle and would not fill with water John M. • Ottsville , PA • October 14, 2016
The error code implies a faulty fill valve. This was not the case for me. Replacing the main PCB assembly solved the problem. I have run two full loads since the repair with no problems.
Read more
More
$287.95
- Compare At:
-
$342.66
- You Save:
-
$54.71