Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Creates an airtight seal around your freezer door to maintain consistent temperatures and prevent cold air loss. Replace if torn, cracked, or loose.
Replaced Case Water Filter assembly DA81-05883A. Please read my post entirely before starting. I completed all the tasks that I could without having to disconnect the refrigerator since it was full of food. First I removed the panel on top of the refrigerator that covers the water line that feeds the dispenser. Do not disconnect any electrical connections or the water line at this time. Remove the panel from the back bottom of the refrigerator that covers the compressor and water valve,... Read more
Replacement cap that seals the water filter housing and attaches to filter cartridges. Needed when cap is cracked, broken, or missing notches prevent secure fit.
Replaced cap Read more
Protective cover for the ice maker's infrared emitter sensor in the freezer compartment. Replace if cracked, broken, or missing to shield the sensor.
Followed the video you provided. Read more
Creates an airtight seal to maintain temperature and prevent cold air leaks. Replace if worn, cracked, or failing to seal properly. Verify fit with your model.
Located appropriately sized door gaskets. Read more
Fix ice not dispensing or motor running but no ice with this refrigerator ice dispenser spring. Essential part for cubed and crushed ice. DIY repair.
The problem was that the motor coupler & shaft had a tiny bit of rust at their union. With the weight of the ice bin it rusted in the lowest position. This didn't allow the motor coupler to float on the shaft. There is a spring inside the shaft that pushes up on the motor coupler keeping it engaged in the ice bin coupler above. This coupler in turn rotates the auger in the bin to dispense the ice. I removed the motor coupler & shaft, tapped the coupler loose and filed off the rust. This allowed... Read more
Fix an ice maker that stopped working or leaks water into the bin. This ice mold tray replacement takes about 10-20 minutes with our step-by-step video.
I have a Whirlpool Side-by-side Model ED22PWXBW01. A year ago, the ice cubes started freezing together in the rear of the ice bin for no apparent reason. Although the problem started off small, it gradually grew much worse, and finally I could see water dripping out of the ice mold and into the bin during the fill cycle. Re-levelling the refrig didn’t help, nor did adjusting the cube size / fill level. With guidance from the video, I removed the icemaker from the wall of the freezer. The... Read more
Secures the handle end cap to the center of your refrigerator door. Replace if missing, stripped, or lost during handle repairs. 8-18 x 1/2 inch size.
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one. Read more
Fix leaking water or ice maker not filling? Water inlet valve controls flow to ice maker and dispenser. DIY repair takes 10-20 minutes with basic tools.
Replaced inlet valve. Read more
Refrigerator warm but freezer cold? Noisy evaporator fan? This mounting grommet reduces vibration and noise. Takes about 1 hour to replace with video guide.
I could not be happier with my Appliance Parts Pros experience. I googled my symptoms, and the 2nd result was a video from Appliance Parts Pros describing what the problem might be and exactly how to fix it. There was such a close match between my symptoms and the description that I ordered the parts --- with a 365 day return policy, my risk was limited. Almost too good to be true, the parts arrived next business day! I took it slow (about an hour) to install the new evaporator fan motor,... Read more
Ice dispenser not working or skipping? This coupling washer connects the auger motor to the ice bin. DIY-friendly repair with video guide included.
Bottom mounting screw for refrigerator ice maker auger assembly. Secures auger blade components together. Replace if stripped, damaged, or missing.
The Whirlpool refrigerator ice maker is a good design. The 8 32 screw was a problem I could not remove it with the thread lock it prevented me from unscrewing it. Therefore I replaced the shaft the splined hub and spacer washers. It seems to work fine now. Read more
Lower door hinge kit for side-by-side refrigerators. Includes left and right hinges. Replace worn, cracked, or missing hinges to restore proper door swing.
Put the new hinges on the doors fyi you need to tell what size the screws are for the hinge kits would help a lot Read more
Ice dispenser door won't open or ice won't drop? This refrigerator ice dispenser motor powers the chute door mechanism. Moderate DIY repair, 30-45 minutes.
Reviewed the AppliancePartsPros.com site and decided that the most likely suspect was the ice motor. I ordered one and got it FAST! I removed the water ice tray in the bottom of the Ice/water kiosk which exposed two phillips screws which I removed. The front panel came off by lifting upward and unplugging it. The ice door motor was visible near the top of the opening. I removed the hex head screws with a 1/4" nut driver so the ice door assembly was free. The core control board was hidden... Read more
Cracked or missing ice maker cover exposing internal components? This protective cover shields the ice maker assembly. Simple DIY install in minutes.
Replaced icemaker and shutoff arm. Easy project. Read more
Refrigerator light won't turn on? This light socket kit restores interior lighting when bulbs won't work. Simple DIY repair with video guide.
I saw your video on you tube and it seems very easy to do it my self, so I ordered the parts and I did it my self. It was very easy. Thank you for sharing with us on how to did it. One more thing, the parts arrived on the time they said it would come. Read more
Factory screw secures panels, brackets, and internal components in refrigerators and freezers. Replace missing, rusted, or stripped screws for secure fit.
Found the parts in the diagram of my fridge and simply installed it very easy Read more