11021302012 Type 588-10 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9724509
These lid bumpers are sold individually.
Do-It-Yourself Stories from Customers like You
(1) motor drive coupler (spider) broke / (2) lid switch cracked at screw hole which allowed it to drop down causing the switch not to activate without rigging an extension on the lid actuator post David S. • Hillister , TX • May 04, 2016
Replaced both with ease after reviewing video. Parts matched OEM specs perfectly. ***Shipping time was excellent - placed order with standard package delivery at @11pm on a Tuesday evening & received the order in Southeast Texas Thursday morning @11am.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11132267
Fix loud grinding noise or basket won't spin issues. This washer transmission gearcase drives the agitator and basket rotation. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Whirlpool cabrio wtw5500xw0 transmission gearcase failure John H. • Fort Polk , LA • February 28, 2017
Symptoms: Machine was spinning and spitting a dark colored oil in a circular pattern on the floor under the machine. No strange noises, just messy. Researched issue, Gear-case bad, seal deteriorated and not preventing water from entering gear-case. The additional cam, belt etc I had replaced due to the amount of oil and transmission residue attached to them.
Ordered parts, EVERYTHING parts-wise that is needed is included in gear-case package.
**NOTE: You WILL need to get a whirlpool spanner...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10192089
Cracked bleach dispenser leaking onto your washer? This cup holds and meters bleach during wash cycles. Simple snap-in installation, video included.
Do-It-Yourself Stories from Customers like You
Unbalanced load damaged the top ring of the outer drum David S. • Milton , FL • November 18, 2024
Replaced top ring and removed inner drum to remove pieces that were broken.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10109200
This replacement screw secures panels, brackets, and other components in your appliance to keep them aligned and rattle-free. Replacing worn, stripped, or missing hardware restores a tight fit and helps maintain safe, quiet operation.
- Fastens panels, brackets, or internal parts to the cabinet/frame
- Helps maintain alignment to reduce vibration and rattling
- Replaces lost, stripped, or corroded screws
- Common symptoms: loose panels/trim, rattles, or a screw that won't tighten
What's included: One screw. Install notes:
- Disconnect power; shut off water or gas if applicable
- Match thread and length to the original; replace one at a time to keep alignment
- Start threads by hand to avoid cross-threading; use the correct driver
- Tighten snugly—do not overtighten, especially into plastic or thin sheet metal
Do-It-Yourself Stories from Customers like You
Missing baffles Anna S. • Shoreview , MN • January 31, 2016
I ordered two replacement baffles and screws, then lifted the top of the dryer to access the drum and installed the two new baffles.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10356257
This water inlet valve controls the flow of hot and cold water into the washing machine tub during fill cycles. It contains solenoid-operated ports that open and close in response to signals from the control board. Replace this valve if your washer is not filling with water, filling slowly, leaking from the back, or continuing to fill when it shouldn't.
Do-It-Yourself Stories from Customers like You
No cold water into washer Jack F. • Altoona , PA • March 01, 2015
Replaced water inlet valve
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10273971
This factory screw secures panels, brackets, and other components in your appliance. Replace a missing, stripped, or corroded fastener to restore a tight fit and keep parts properly aligned and rattle-free.
- Secures appliance components and panels in their mounting points
- Replaces damaged, stripped, or missing hardware
- Helps reduce rattling or vibration from loose parts
What's included: One screw Install notes:
- Disconnect power; shut off water or gas supplies if applicable
- Match location with the original screw; start threads by hand to avoid cross-threading
- Tighten until snug; do not over-torque, especially into plastic or thin metal
- Reinstall any covers or panels and test for secure fit
Do-It-Yourself Stories from Customers like You
E3 F5 Stacy J. • Elk Grove , CA • August 03, 2018
In the past we’ve fixed the latch with just high speed great. This time we ordered a new latch and replaced it. Washing machine has been working perfectly ever since. It was very easy to find the right part by simply entering the model number of my washing machine. It was quick delivery and the correct part. Very happy to have a working washing machine again.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10215093
Washer won't drain or clothes have residue? Replace the drain pump filter that screens debris and prevents clogs. Protects pump from damage.
Do-It-Yourself Stories from Customers like You
The gears were rusted and stripped in the transmission and the hub was cracked. Blane L. • Columbus , OH • January 11, 2019
On a 3 year old Maytag...........New gear case and hub installed. The videos produced by AppliancePartsPros are quite helpful, even though the video was not of the exact make and model number I was repairing, the similarities were so great that it may as well have been the same make and model number (whirlpool and Maytag essentially make the same thing and slap I different sticker on them)
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10432353
Fix washer water leaking into tub or slow dripping when off. Water inlet valve assembly replacement stops fill valve leaks. Easy DIY repair with video.
Do-It-Yourself Stories from Customers like You
Water inlet and lid latch switch Michael R. • Almena , WI • March 28, 2016
I ordered from this company expecting the parts to be later than they said and the parts showed up in 2 days like they said. Just before the Easter holiday even. Amazingly fast. Very satisfied!!! Washer is up and running again. Great job on getting me my parts! Thank you!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10285512
Fix erratic or unresponsive cycle selections with this laundry center rotary encoder switch. Mounts behind the cycle knob to restore accurate settings.
Do-It-Yourself Stories from Customers like You
Temperature control switch failed to cold only. Marilyn M. • Summerfield , FL • September 30, 2017
Replaced with a new one.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8281163
Replacement screw for securing panels, brackets, and internal components. Replaces missing, stripped, or damaged fasteners to restore proper fit.
Do-It-Yourself Stories from Customers like You
Whirlpool wtw5000dw1 top loader door would not lock, spin cycle would not function John C. • Cornelia , GA • December 24, 2021
Replaced door latch and switch. Parts are plastic so you must know what you are doing to avoid breaking new parts. Videos were hard to find for my model - eventually I found a video that addressed a different problem but required disassembly of a washer cabinet similar to mine. I removed the control panel using a putty knife and unplugged the wire to the latch switch. Then I remove 3 screws securing the washer's top panel to the back panel. Using a rubber mallet, I gently knocked the top panel...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489069
Size: 1/4 inch hex head, 10-12 x 1/2 inch.
Do-It-Yourself Stories from Customers like You
Broken handle foot pedal and missing parts Donald M. • Lake Arrowhead , CA • April 05, 2015
This trash compactor is in our vacation home. We never use it and now we are selling the house. When I looked to replace it I was amazed at how expensive a new compactor would cost. I found the serial number on the current compact entered it and your web site came up. Your schematics were excellent and made the repair very easy!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10759923
Replacement retaining nut for washers and dryers. Secures components like pulleys, shafts, and assemblies. Order a new nut if yours is stripped or missing.
Do-It-Yourself Stories from Customers like You
Would not go into spin cycle automatically Daniel H. • Marlborough , MA • March 01, 2015
Have had this experience before. Ordered the same parts as last time plus a few more related components. Performed the repair in under an hour. All is good.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 285863
Extends the drain hose approximately 4 feet. You must also order a drain hose connector kit: 285835.
Do-It-Yourself Stories from Customers like You
Washer drain hose not long enough Ray P. • Frankfort , IL • February 07, 2016
I ordered the drain extension kit and the hose connector kit.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 8212487RP
Two 5-foot nylon braided hoses connect household water supply to washer inlet valves. Replace cracked, leaking, or aging hoses to prevent water damage.
Do-It-Yourself Stories from Customers like You
Water inlet was obstructed Jessica C. • Mount Shasta , CA • April 15, 2018
Watched u tube video. Ordered replacement water inlet valve and new hoses. Dismantled washer and replaced defective valve and installed new hoses. The repair went very easily and the washer worked perfectly as a result.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 8212638RP
Contains two, six foot long braided hoses with 90 degree ends.
Do-It-Yourself Stories from Customers like You
Kenmore fh error code Michael H. • Cataula , GA • January 18, 2015
I had a problem with the drain pump on my Kenmore HE3 and I replaced it using a drain pump I ordered from APP. That fixed that problem but once I started running the washer I started getting a FH error code. I looked it up and found that it was a problem with the washer not filling properly. I pulled the washer out and found that one of the fill hoses had kinked when I pushed the washer back in place. There was also some writing on the hose that read "Change hose every five years". I know I had...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10739673
Adjustable leveling leg screws into washer base to stabilize and level your machine on uneven floors. Replace worn, missing, or damaged legs for stability.
Do-It-Yourself Stories from Customers like You
The washer was shaking badly during the spin cycle David W. • Sarasota , FL • November 27, 2018
I replaced the drive block & leveling feet, it helped a lot but the washer still shakes a lot, I am now going to try replacing the suspension rod kit, These were the most recommended fixes to the problem.The repairs were not too hard, I wish I had a spanner wrench, I couldn't find it on the website.
Read more
More