Your privacy choices: We and our partners use cookies for analytics and ads. Decline all turns them off.
Privacy Policy · Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Microwave won't power on or turn on? Failed thermostat causes complete power loss. This safety part protects against overheating. DIY repair in 30 minutes.
I attempted to diagnose the four thermostats/thermal switches in the microwave....two right behind the control panel, one on top of the cooking cabin, and one under a metal shroud above the magnetron. While checking continuity with a voltmeter, i questioned one of them behind the control panel and the one above the magnetron. I then noticed a burn mark on the plastic connector sleeve for the one above the magnetron. I took a scrap piece of 14 gage copper wire and beat the ends flat with a... Read more
Fix water leaks behind the detergent drawer with this washer upper nozzle connector. Located under the top panel. Easy 5-minute DIY repair with basic tools.
When I opened the rear cover and check the temperature sensor, I noticed the wire connection was damp. I dried it up with a hair dryer and it worked again for a few days. Then the problem came back. When I gone back to inspect the second time, i noticed a lot of water on the floor. I knew there was a leak. I followed the disassemble samsung washer video from "Repair clinic.com" to open the top cover, then i realized the assembly hose was busted. I ordered the parts from this site and... Read more
Fix a washer that won't fill, overfills, or runs continuously with a new water inlet valve. Simple 20-minute DIY repair with step-by-step video guide.
Changed the water valves. Read more
Fix ND error codes and drainage issues with this washer check valve. Prevents backward water flow in drain pump. DIY-friendly repair with video guide.
Washer said error no drain. Cleaned the filter and still no drain. So the next step was to check the hose for any debris and when I went to pull the hose off it broke, at the same time I found the check valve flap broke in the drain pump and it was blocking the hose. So I replaced the check valve on the drain pump and replaced the hose. Read more
Grease filter for range hoods and over-the-range microwaves. Dimensions: 5-15/16" x 13-3/8" x 3/32" (5.9375 x 13.375 x 0.09375). Rectangle shape. Captures grease from cooking air. Replace when clogged, discolored, or every 6-12 months.
I got it in the mail, I opened it, I handed it to my wife....and she installed it. Easy-Peasy! (Being retired is a blast) Read more
The Washer Door Lock Bezel Cover-Switch Assembly is an essential component for maintaining the functionality and security of your Samsung washer. This genuine OEM part ensures a perfect fit and reliable performance, matching the original design of your appliance. The assembly combines both the bezel cover and the switch, providing a seamless replacement that restores the door locking mechanism to its optimal state. By choosing this Washer Door Lock Bezel Cover-Switch Assembly, you benefit from enhanced durability and precise operation, preventing issues such as door leaks or malfunctioning locks. Installation is straightforward, allowing you to easily replace a damaged or worn-out part without the need for professional assistance. Compatible with a wide range of Samsung washer models, this genuine OEM part guarantees compatibility and longevity. Investing in this high-quality assembly helps maintain your washerGÇÖs efficiency and extends its lifespan, ensuring that your appliance continues to deliver excellent washing performance. Trust in this reliable component to keep your washer running smoothly and securely.
Ordered part by looking at parts diagram and followed You tube instructions. Easy and quick! Read more
The Microwave Plate Mounting Bracket is designed to securely hold the turntable plate in your microwave, ensuring smooth and consistent rotation during use. This genuine OEM part guarantees a perfect fit and reliable performance, maintaining the stability and functionality of your Samsung microwave. Crafted from durable materials, the mounting bracket withstands daily use and prevents wear and tear, extending the life of your appliance. Installation is straightforward, allowing you to quickly replace a damaged or broken bracket without the need for professional assistance. By choosing this authentic part, you ensure that your microwave operates efficiently and safely, providing a seamless cooking experience. Whether your original mounting bracket is cracked, missing, or no longer functioning properly, the Microwave Plate Mounting Bracket is the ideal solution to restore your microwave's performance and keep your kitchen running smoothly.
I ordered the part and it was there in three days. I was so happy to get it and make the wife happy. Read more
Dryer runs but won't heat? A blown thermal fuse is the most common cause. This overheating safety device protects your dryer's heating system. DIY repair.
Removed the heater of course and installed the part. Very easy to do no need to remove the drum, just top cover, control panel, and front door assembly. Remove the one screw holding heater, remove blue wire, turn heater CCW to the 8 o'clock poisiton. Install in the reverse order. This is the secound one in a month if it fails again i'll just bypass it and install a 25 AMP fuse. Read more
Replace your washer's door boot seal when you notice water leaks, mold, or visible tears. Ensures a watertight seal during wash cycles. Verify fit by model.
I ordered new door gasket, front and rear clamp for gasket and installed them. Read more
Replacement halogen bulb that illuminates your microwave's cooking area. Replace when light dims or burns out. Verify fit using your model number.
Inserted new bulb. Read more
The Dryer Fan Motor Assembly is essential for maintaining optimal performance in your dryer. This genuine OEM part ensures reliable operation by replacing your existing faulty fan motor and blower assembly. Designed specifically for Samsung dryer models, it guarantees a perfect fit and seamless integration with your appliance. The motor and blower assembly work together to provide consistent airflow, enhancing drying efficiency and reducing drying times. By choosing this genuine OEM part, you are ensuring the longevity and proper functionality of your dryer. Installation is straightforward, allowing you to quickly restore your dryer to its full capabilities without the need for professional assistance. This assembly helps prevent overheating and reduces noise, contributing to a quieter and safer drying environment. Whether your current fan motor is worn out or damaged, the Dryer Fan Motor Assembly offers a dependable solution to keep your laundry routine running smoothly. Trust in a quality component that supports the durability and performance of your Samsung dryer for years to come.
Replaced dryer motor Read more
Washer won't start or door won't open? A faulty door lock assembly is the likely cause. This repair takes about 15 minutes with basic tools.
Ordered part took seal off to gain access..couple of screws and connectors..bk in business Read more
The Washer Damper Assembly is an OEM replacement part for Samsung washing machines. This component is crucial for reducing vibrations and absorbing shock during wash and spin cycles, ensuring the washer operates smoothly and quietly. By stabilizing the drum, it helps prevent excessive movement that could damage other parts of the washer.
Causes of a bad damper assembly include wear from heavy or unbalanced loads, prolonged use, or damage due to impact. Over time, the dampers may lose their effectiveness, leading to increased vibrations and noise.
Symptoms of a bad washer damper assembly include:
This OEM Samsung part is also compatible with select Kenmore and other washer models.
The AppliancePartsPros video on how to change a washing machine's suspension support rods was very helpful in this repair. It went without a hitch. Now the machine runs like new again and haven't the unbalanced error code since the repair. Read more
Fix weak agitation or cracked pulsator in your washer. This one-piece pulsator assembly restores proper wash action. Moderate DIY repair with video guide.
Ordered a new part and installed Read more
Washer not draining or water backing up? This check valve regulates water flow and prevents backflow. DIY repair with video guide included.
First of all, I cannot believe that Samsung would actually think that putting the drain pump on the drum was a GOOD idea. The fix was easy, When I bought the washer off an individual, She told me that she was informed the drain pump needed replaced. So I did that. Pain in the a&* du to the location and trying to secure the bolts. It broke off after a week. I found out that Samsung put out a repair bulletin and a customer service rep from this site emailed it to me. After looking up the parts,... Read more
Secures drum support rollers in place for smooth rotation. Replace if rollers slip, drum wobbles, or clunking occurs. Verify fit with your model number.
I initially thought the dryer belt broke (common problem) and found a good video made by appliance parts pros showing how to replace the belt. As I took the dryer apart I discovered multiple issues. Appliance parts pros had all of the parts I needed and instructional videos that gave me the confidence to do the job. Ordered parts on a Sunday afternoon, parts arrived Tuesday morning and was back in business within an hour. Read more
Opt-Out Request Honored
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.