We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Icemaker Fill Tube Fitting is an OEM part for Whirlpool refrigerators. This part connects the water supply line to the icemaker, ensuring a seamless and leak-free delivery of water into the icemaker mold.
Causes of a bad Icemaker Fill Tube Fitting can include wear and tear over time, mineral buildup from hard water, which can block the water flow or damage the fitting, and improper installation that may lead to leaks or restricted water flow.
Symptoms of a bad Icemaker Fill Tube Fitting include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
I watched your how-to video. It explained the repair PERFECTLY. It was an easy repair and the video was very detailed. It took the guesswork out of the repair. I was done in 5 minutes. thanks for taking the time to post videos for your parts. I'll shop here again. Best Regards, Chad M Read more
Fix a water dispenser or ice maker that won't work. This dual water inlet valve controls water flow to both systems. DIY repair takes 5-30 minutes.
Fix was very easy, I ordered a replacement dual water inlet valve from appliance parts pros .com and waited just a few days for order to be received. After I received the order, I got my tools out and pulled the refrigerator out from the wall. Unplugged the power cord form the wall, turned off the water at the valve in the wall, grabbed my nut driver and removed the cardboard backing on the lower side of the back. I checked that the part that I received to wee if it matched the original part,... Read more
Creates an airtight seal around your freezer door to maintain consistent temperatures and prevent cold air loss. Replace if torn, cracked, or loose.
Replaced Case Water Filter assembly DA81-05883A. Please read my post entirely before starting. I completed all the tasks that I could without having to disconnect the refrigerator since it was full of food. First I removed the panel on top of the refrigerator that covers the water line that feeds the dispenser. Do not disconnect any electrical connections or the water line at this time. Remove the panel from the back bottom of the refrigerator that covers the compressor and water valve,... Read more
Plastic endcap that fits on the end of refrigerator shelf trim for a finished look. Replace if cracked, broken, or missing to secure trim in place.
I took the old shelf bar out the door and replaced it with the new one. Fit perfectly. Looks awesome. Read more
Ice dispenser broken or slow? The ice container assembly holds and dispenses ice through your refrigerator door. Easy DIY fix with no tools required.
Simple fix purchased complete assembly slid old one out and new one in transferring ice was hardest part Read more
Forms an airtight seal around your refrigerator door to maintain temperature and efficiency. Replace when torn, cracked, or no longer sealing properly.
Order part and done. you guys are amazing I was expecting my part in 7 to 10 days and got it less then 24 hours after I order. thank you.... Read more
Clear plastic snack pan drawer for refrigerator storage compartment. Replace if cracked, scratched, clouded, or broken. Slides into existing tracks.
I searched the web for a replacement drawer to no avail. Once I reached this site I was pretty discouraged when your site also said my drawer was no longer available. A suggestion for a different replacement drawer that MAY work was my only option. I purchased the drawer with the understanding that it could be returned if it didn't fit. To my surprise it came in two days and fit perfectly. I am thrilled every time I open the fridge. I am VERY pleased with this purchase and would... Read more
Replaces broken or cracked endcaps that secure door shelf retainer bars. Snaps onto refrigerator door to hold shelves in place and prevent items from falling.
Submitted September 7, 2014 On my 1993 (mfg. date) Whirlpool side-by-side refrigerator/freezer, the shelf endcaps on the inside of the refrigerator door were broken. The endcaps (paired) are the plastic pieces that attach each shelf's horizontal metal strip to the door. The horizontal strip acts as a retainer to keep items from falling off the shelf. The refrigerator door contains 4 door shelves, thus 4 horizontal metal strips held in place by 8 plastic endcaps. Some of the original endcaps,... Read more
Refrigerator warm but freezer cold? Noisy evaporator fan? This mounting grommet reduces vibration and noise. Takes about 1 hour to replace with video guide.
I noticed Ice maker Quit for the third time in 15 years so I decided to buy another Ice maker, I installed it and NO ice still?? Well I went after the other problem thinking if it does not get cold enough maybe ice maker won’t work. I ordered Defrost Switch, Heater and Evaporator Fan just to be safe. I replaced all three, the fan was noisy, the heater OHM’d ok but I replaced it as did the defrost switch, I put it back together, the Freezer got to 0 degrees and the frig got to 38 degrees so I... Read more
Water tube assembly supplies water from inlet valve to ice maker and dispenser in your refrigerator door. Replace if cracked, leaking, or broken.
After watching installation videos on each felt I could pull it off and ordered and received replacement water reservoir and water dispenser tube assembly. Reservoir installation went off without a hitch outside of the added step of the need to remove the entire main in waterline assy in order to access the connectors which also were not as represented in video, in that they were not the press-to-release type but standard threaded compression types. Water Dispenser tube/spout assembly was much... Read more
Water leaking from bottom of fridge? Cracked evaporator drip tray lets defrost water escape. Moderate DIY repair, about 45-60 minutes with our guide.
The drain pan (Tray-Evaporator Pan) was cracked in 2 places. We had to remove the front panel. Loosen the bracket that holds the water filter. Take off the back panel and disconnect the bracket that holds the selenoid. It was not necessary to unhook the water lines, just the bracket. It was not easy to remove the old pan and get the new one in, but holding the water filter, with the bracket intact, as far to the left side of the refrigerator as possible gave us the room to get the pan in. ... Read more
The Dispenser Arm Strain Relief is an OEM replacement part for Whirlpool side-by-side refrigerators. It connects the water and ice dispenser arm to the fridge cabinet, absorbing tension during use.
Causes of a bad strain relief involve wear and flexing fatigue of the plastic over extensive dispensing cycles. Exposure to moisture or liquid damage inside the fridge liner may prematurely degrade connecting parts as well.
Symptoms of a bad strain relief include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore side-by-side refrigerator models.
With the help of the fantastic videos provided on the web site for each replacement part, it was extremely easy to complete the repair Read more
Stores and chills water before dispensing. Replace if cracked, leaking, or causing slime/film buildup in dispensed water. Installs inside refrigerator.
This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one. Read more
Creates an airtight seal around your refrigerator door perimeter to maintain proper cooling. Replace if cracked, torn, or no longer sealing. Confirm fit by model.
Removed the worn gasket, cleaned the door, snapped on the new gasket. Read more
The Door Shelf Bar is an OEM part for Whirlpool refrigerators. This part goes on the door to hold condiments on the shelf. This does not include the endcaps. Causes of malfunction involve cracks developing from weight stress on fasteners. Symptoms of a problematic shelf bar include:
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
Note: In some cases, you may have to cut to fit.
It just popped right in after I received them promptly from you all! Read more