Maytag Mdb9750awq Dishwasher- Undercounter Parts

Very smooth. I ordered the door and the control panel. It is helpful to have an extra set of hands when removing the screws from the door or place something under it so it doesn’t drop. The door comes off with about 10 screws. They are different length. Short screws go into steel, long go into plastic. Remove the door and upper facia/control panel. You’ll need to disconnect the wires. The panel has two parts that need to be transferred. 1. The electronic panel. It’s white and has a row of... Read more

• Door latch failure
• Door won't close
• Won't start

I am 68 years old. What that means is that have seen enough in my life. And with the exception of Amazon.com. Every website on the Internet is a gamble. You can never really tell what kind of a company you are dealing with just from a website no matter how fancy it looks. I tried other Parts suppliers on the web before, and they were just what you expect: OK but nothing to brag about. With that attitude I came to this company, and after ordering the part, receiving it, installing it, dealing... Read more

• Door won't close
• Door latch failure

The first part I ordered was cheaper but did not include the handle. Cents I had plugged it in I figured I couldn't return the part. So I ordered the correct part and it was a piece of cake to install. The one thing I didn't understand was why they sold that part why out the handle? After looking very close I could have never put the handle on the latch assembly, and I have a lot of experience at things like this! Read more

• Will not stop filling with water
• Leaking

First off I have to say that Appliance Parts Pro's saved me from hiring a repair person, and quite possibly just getting rid of my washing machine. Their video's helped out SOOOOOOOO much and the advice one of their agents gave me over their online chat helped me trouble shoot something when I got stuck. On top of this they shipped my parts fast enough that less than 12 hrs later they arrived, which allowed me to get my machine up and running way faster than the other options I had available.... Read more

Tipped the dishwasher on to its front, loosened the drain hose clamp and pulled the hose off. Then unscrew the fill hose which looks like a garden hose adapter. Cut the zip tie on the drain hose and take note of how both hoses are routed, then pull both hoses out the back of the dishwasher. Insert new hoses and route them correctly and hook everything back up. Couple of notes, I didn't have to take off the outer cabinet to do this repair. Get plenty of towels because a lot of water can get... Read more

Normally when you let go of the dishwasher door partly open it would stay in that position. But lately when you let go of the door it would fall to the fully open position. Turns out this little cable was broken one one side. Just puss the dishwasher slightly out of the cabinet and you can replace the cable in minutes. It is just held in place with a spring. Read more

Dishes were 'gritty' with an almost invisible coating of specks smaller than grains of salt. Prior to ordering parts, I had to determine which part(s) needed replaced and which could benefit from a good cleaning. After viewing Appliance Parts Pros YouTube Videos, I removed the Main Manifold (snaps right off) including the Top Spray Arm. I discovered the Flappers of the Docking Station (AP6009888) were worn out and/or missing. I removed the Docking Station simply by popping the old one off... Read more

I incorrectly diagnosed the problem as the control circuit board and bought the board from another on-line store where it took almost a week to receive it. The control panel (# 6-919765 ) was the correct fix that I ordered from AppliancePartsPros. I was skeptical of the reported 1.7 days with standard shipping but I ordered mine on Monday morning and had it on Tuesday afternoon. Quick install by removing the inner door panel, moving the door latch and circuit board out of the way, and... Read more

Motor shaft was stripped, replaced with new shaft from Motor Seal Kit. Impeller was also cracked, so replaced it as well. I did run in to a small problem, the chopper blade was pressing against the metal grate on the piece that goes back over the motor seal. I spent about an hour messing with it, but thought maybe once it's all together it'll be fine. When you screw the impeller on, it pushes down the seals, which pushes down the chopper blade. Video on Motor Seal Kit page made it an... Read more

Ordered a new pump Read more

• overflowing

Replaced the water inlet valve and float switch. Read more

Ordered and installed clips from AppliancePartsPlus. Only suggestion is a picture of exact INSTALLED location of part. The breakdown ordering picture is great but when it comes to installing parts that have broken and not longer attached, instructions would be helpful. Read more

• Not drying dishes properly
• lights flashing or blinking

Number one was turn the power to the dishwasher off. I disconnected the hoses under the sink. The dishwasher had to be pulled out from the cabinet. The old heating element easily came out and the new one put in its place. The instructional video made the repair very easy. Read more

• Leaking

I ordered a new rubber door seal for around door, new bottom door seal and spinner impeller and nut to hold on bottom arm as it looked weak. Everything worked great except bottom door seal which looks slightly different and would NOT stay on. I ended up putting back on the old one. Door doesnt leak but not sure it would even be worth it sending part back as I already tossed bag out. Other parts worked great and DW cleaning better. Read more

Ordered the parts which were received promptly. My wife and I tried to install some without much luck. Our adult daughter came for Thanksgiving and installed them perfectly in minutes. It's tough to get old. Very satisfied with service and would use again if needed. Read more

Replaced control board with OEM part from ApplianceParts Pro - fit exactly and remedied the problems. Simple to replace - turn off power (circuit breaker), remove internal door panel, remove control board cover and unplug wires/LED leads (the LED lead connectors on the board have a square tension slip ring around them that hold the leads - just pull these up away from board and they will release the leads) and then remove the controller board housing. The controller board is held into the... Read more