Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This replacement sealing gasket restores a tight, leak-resistant barrier between mating components in your appliance. Replacing a worn seal helps prevent leaks and moisture escape to keep performance stable and reliable.
We replaced the black door seal gasket around the front of the dishwasher. The old black seal gasket had begun to deteriorate, every time it was touched black stuff would rub off onto hands and onto utensils in the upper basket. We wore some disposable gloves to remove the old seal to avoid getting the black stuff on our hands. Before entirely removing the old seal gasket we studied its placement to tell which way the new seal gasket should be placed. We didn’t want to place the seal gasket... Read more
The Drain Pump is an OEM part for Bosch dishwashers. It is designed to remove water from the dishwasher's tub after the wash and rinse cycles, ensuring that the dishwasher drains properly. This pump expels the used water through the drain hose and into the household drainage system, maintaining the efficiency and hygiene of the appliance.
You should replace the drain pump if it becomes faulty. Causes of a bad drain pump can include wear and tear from regular use, blockages from debris or food particles, or electrical failures. A malfunctioning pump can lead to water not draining properly, which can affect the dishwasher's performance and cause water to pool inside.
Symptoms of a bad drain pump include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
I spent a lot of time taking apart and cleaning the drain pump and hoses in my Bosch dishwasher. I still got the error that the drain pump wasn't right. So, after doing some research, I learned that the motor might be done and that seemed to be the only solution. I serached for my part on APPs.com and found the part for about $43 ($50 by the time tax and shipping was added in). The part was ordered, shipped and was on my doorstep in two days. I followed the repair video instructions provided... Read more
The Lower Dishrack Wheel is an OEM replacement part for Bosch dishwashers. These wheels are essential components that allow for smooth and effortless movement of the lower dishrack or basket in and out of the dishwasher tub.
Symptoms of needing to replace the lower dishrack wheels include:
Causes of faulty lower dishrack wheels can include normal wear and tear over time, exposure to debris or foreign objects that can cause damage, or issues with the track or rail system on which the wheels operate.
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwasher models.
Popped on the new one, very easy Read more
The Micro Pump Filter is an OEM part for Bosch dishwashers, designed to capture and prevent debris from entering the pump and circulating system of the dishwasher. This crucial component ensures that water remains clean throughout the wash cycle, protecting the dishwasher's internal components from damage due to particles and food residue.
Causes of damage to the micro pump filter often involve the accumulation of debris and food particles over time, which can lead to clogging or physical damage.
Symptoms of a bad Micro Pump Filter include:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Ordered a new filter. Read more
The Lower Door Seal is an OEM part for Bosch dishwashers. It plays a crucial role in preventing water from leaking out of the dishwasher door during cycles. This seal is positioned along the bottom of the door, ensuring a tight and secure closure that keeps water contained within the unit.
Causes of a bad Lower Door Seal may stem from various factors. These include natural wear and tear due to extended use, chemical degradation caused by harsh detergents, physical damage like tears or cuts, as well as improper installation or alignment.
Symptoms of a bad Lower Door Seal include:
This OEM Bosch part can also be used on Thermador and Gaggenau appliances.
I bought the door and bottom seal and was already to go. Appliance Pro got the parts to me in 2 days. I read an article that said if the spray arm holes are blocked that this could cause a wave in the dishwasher that could cause the water to fly up to the inlet used for drying and the water could run down between the front and inside door appearing to be a leak. I checked and my spray arms were indeed blocked. I pulled them out, cleaned them up, reinstalled, and low and behold that was appeared... Read more
The Dish Rack Wheel with Clip is an OEM part for Bosch dishwashers. It is essential for the smooth gliding of the dishwasher rack in and out of the unit, facilitating easy loading and unloading of dishes.
Causes of a bad Dish Rack Wheel with Clip can include physical damage from impact, wear from frequent use, or degradation of the wheel material, leading to a less smooth operation.
Symptoms of a bad Dish Rack Wheel with Clip include:
I changed the control board (00498022) in the door of my Thermador dishwasher. Thermador, Bosch, and Siemens all use the same board for the indoor controls and display. This required a #15-star head driver to remove the screws. I used an impact wrench (set to a low torq setting) to speed things up. There are approximately 12 screws to remove. Two are long. The rest are short. Be careful to hold the door together as the last screws are removed. Everything comes apart easily and you do not... Read more
The Mounting Bracket Kit is an OEM part for Bosch dishwashers. The mounting brackets provide structural support and help distribute weight evenly across the base. Note: This is a kit of (2) brackets. For the mounting screws, order part number 00189670.
Causes of a bad mounting bracket can include cracks or breaks developing due to stresses placed on the unit over time. Improper installation that puts excessive strain on the bracket can also cause damage.
Symptoms of a bad mounting bracket include:
This Bosch part is also compatible with Thermador, Gaggenau and some Kenmore models.
This turned out to be a major effort, requiring me to disconnect the dishwasher, pull it from the cabinetry and partially disassemble the dishwasher to replace the door closer pulley Read more
The Rinse Aid Lid is an OEM part for Bosch dishwashers. It is a component of the rinse aid dispenser system, responsible for covering and sealing the compartment where the rinse aid is stored.
Causes of a bad rinse aid lid may include wear and tear over time, physical impact, or compatibility issues with certain types of rinse aid.
Symptoms of a faulty Rinse Aid Lid include:
I bought just the replacement lid based on other reviews. The door cost about a third of the whole soap dispenser module but took a chance it was just the lid. Although the part number is the same there was a new flange on the inside of the lid. Would have been nice if Bosch sent the redesigned part to owners. Either way replacement took 2 minutes and the problem is gone Read more
The Detergent and Rinse Aid Dispenser is an OEM part for Bosch dishwashers. It plays a crucial role in dispensing detergent and rinse aid during the dishwashing cycle. The dispenser is designed to hold and release the appropriate amounts of detergent and rinse aid at the right times, ensuring optimal cleaning and drying performance.
Causes of a bad dispenser can include clogging or blockage in the dispenser mechanism, damage to the dispenser door or latch, or malfunctioning electronic components that control the dispensing process.
Symptoms of a bad dispenser include:
Process was a bit more complicated than the videos I had watched online. Had to remove both front panel and control panel to get to soap dispenser. Removed wires to soap dispenser and rinse aide dispenser. Removed wire "harness" around the top and right side of dispenser. Pried back the clips to allow dispenser to be pushed out. It was helpful to have another person to hold the door open at this point. Bent clips back and reinstalled everything. New part works great. Read more
The Check Valve is an OEM part for Bosch dishwashers. It prevents the backflow of water into the dishwasher after it has been drained, ensuring that dirty water does not re-enter the appliance and contaminate clean dishes.
Causes of a bad check valve can include blockages from debris or food particles, wear and tear over time, or damage from improper installation or handling. These issues can impair the valve's ability to effectively prevent backflow.
Symptoms of a bad check valve include:
Removed water out of basin, down to the last inch.. Watched water rise slowly, and felt temperature, warm. This told me it was supply water. Ordered replacement part, two days just as mentioned, Removed as per video. Also choose to replace the waste line check valve, to affordable not too. Working great, except the wood floor not so happy with. One thing at a time. Thanks Read more
The Rinse Aid Door (with Gasket) is an OEM replacement part for Bosch dishwashers. It is responsible for covering and sealing the rinse aid dispenser. Problems with a rinse aid door can cause leaks during washing.
Causes of issues may include wear over time, damage to the door or integrated gasket. This can compromise the seal needed to contain rinse aid.
Symptoms of a problem rinse aid door:
This genuine Bosch OEM replacement part is also compatible with Thermador, Gaggenau, and some Kenmore models
Twist the old one out, insert tab, twist until other side snaps in. Easy as pie after watching the video! Read more
The Water Valve Assembly is an OEM part for Bosch dishwashers. This assembly controls the flow of water into the dishwasher, ensuring that the correct amount of water is used during the wash cycle for optimal cleaning performance.
Causes of a bad water valve assembly can include mineral deposits from hard water, wear and tear over time, or electrical issues that prevent the valve from opening or closing properly. These issues can lead to improper water flow or leaks.
Symptoms of a bad water valve assembly include:
This was not my first rodeo have repaired our appliances and those of our daughters for years, have ordered parts from this site several times. We had a cold spell in Texas, as you may have heard. We weathered it okay but left the dishwasher closed on one of the colder nights, woke up to water on the floor in the kitchen. Turned off the supply line, shut off the dishwasher power, bailed out the bottom, and mopped up. Had a fair idea of what the cause was, checked a few websites, watched some... Read more
The Sump Assembly is an OEM part for Bosch dishwashers. It collects and channels water to the pump, ensuring proper circulation and drainage during the wash cycle.
Over time, the sump assembly can become clogged with debris, suffer damage, or wear out, leading to compromised performance. Causes of a bad sump assembly include buildup of food particles and mineral deposits, physical damage from sharp objects, or wear from continuous use.
Symptoms of a bad sump assembly include:
Leak was slow but becoming gradually worse. Pulled dishwasher out from under counter then visually inspected sump while it ran. As soon as the water got very hot, I could see the sump leaking where it meets the stainless pan. Searched for the correct sump gasket without success. Turns out that the gasket is built into the sump for this model. The built-in gasket is very narrow (under-engineered IMHO which is probably why it developed a leak). Thanks to Simon's excellent videos at... Read more
The Door Cable Guide is an OEM part for Bosch dishwashers. This guide ensures the door cables are properly aligned and move smoothly when opening and closing the dishwasher door, helping to maintain the door's balance and functionality.
Causes of a bad door cable guide can include regular wear and tear from frequent use, damage from improper handling, or accumulation of debris that hinders smooth movement. A damaged guide can lead to improper door operation and potential strain on the door cables.
Symptoms of a bad door cable guide include:
Got new replacement spring and cord for our Bosch compact dishwasher. A plastic retaining bracket that held the old spring also was broke but the new spring had its own piece that fit into a slot in the plastic frame, so i just popped it in there, connected the cord, and bingo. The door now works. I tried using the old spring, but it would not work because of the broke bracket. Read more
The Drain Pump is an OEM replacement part for Bosch dishwashers. It is responsible for pumping out dirty water from the dishwasher tub at the end of each cycle. The drain pump works to thoroughly empty the tub in a timely manner to facilitate a smooth transition to the next cycle.
Causes of a bad drain pump can include a clogged impeller or blockage of debris inside the pump housing that inhibits proper water flow.
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.
Note: Due to a factory design change, connector part# 00623143 may also be needed.
This was a 5 min job after I watched a video on YouTube Any one can do this Read more
The Detergent Cup Latch W Spring is an OEM part for Bosch dishwashers. This latch securely closes the detergent dispenser cup, containing detergent during the wash cycle.
Causes of a bad latch can include wear and fatigue of the latching spring over many uses.
Symptoms of a bad detergent cup latch include:
After having seen the video I installed the new lid and it worked. Read more