Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Washer won't fill or won't stop filling? This water inlet valve controls water flow into the tub. DIY-friendly repair, typically takes 10-15 minutes.
Conducted research on web, and via direct contact with AppliancePros where a diagnosis of replacing the water inlet valve and cleaning the sensor tube would "most probably" (80%) handle the issue. The remaining uncertainty would reside in the electronic board circuitry. The price of replacing the water inlet valve was half of a local repair call just to diagnose the issue so I decided to have faith in the odds presented to me. The part arrived on time, and using AppliancePros advice and... Read more
The Magnetic Door Plunger is an OEM part for LG washing machines. It is designed to securely hold the door in a closed position during the operation cycle, employing a magnet mechanism for enhanced reliability. The plunger ensures that the door latch is properly engaged, preventing the machine from running if the door is not closed correctly.
Causes of a bad Magnetic Door Plunger can include wear and tear from constant use, failure of the magnetic mechanism due to exposure to moisture or mechanical damage, or a misalignment that prevents the door from closing properly.
Symptoms of a bad Magnetic Door Plunger include:
This OEM LG part is also compatible with Sears/Kenmore.
This was a super-easy repair. You have to line up the spring so that it sits on the bumps inside the magnet holder and the door, then you have to line up the tabs on the magnet holder so they will slide into the slots on the door. Then you just push it in. Repair took less than a minute. Read more
Fix washer overfilling or not filling issues with a water level pressure switch replacement. Common repair for PE error codes. Takes 10-20 minutes to install.
The Pulsator Cap is an OEM part for LG washing machines. It is designed to secure the pulsator (or agitator) in place, ensuring proper movement of the wash plate during the wash cycle. This component helps in the effective distribution of water and detergent, promoting thorough cleaning of clothes.
You should replace this pulsator cap if it becomes damaged, lost, or worn out. Causes of a bad pulsator cap can include regular wear and tear, exposure to heavy loads, or damage from improper handling. A compromised cap can lead to inefficient washing and potential damage to the pulsator.
Symptoms of a bad Pulsator Cap include:
This OEM LG part is also compatible with Sears/Kenmore models.
We had a repair man come and tell us the needed repair at the cost of 70.00 I ordered the parts and saved money. Read more
Connects the washer tub to the drain pump. Replace this hose if cracked, split, leaking, or worn from age. Ensures proper water drainage during cycles.
Checked all hoses for clogs cleaned them out and problem still existed so it was time for a new pump and since I was in there I replaced the drain hoses as well. Pump and hoses were exact oem replacement parts project took 30 minutes and the wife was happy again!!! Read more
This drain hose directs used water from your washer to the household drain. Replace if cracked, split, leaking, or chewed through by rodents.
My granddaughter removed the old hose and installed the new hose I had ordered. Read more
The Customized Screw is an OEM part for securing the wash plate in LG washing machines. This screw maintains the wash plate's position and stability during the washer's operation. The Customized Screw ensures the wash plate performs efficiently, contributing to the effectiveness of the washing process by enabling proper agitation and circulation of clothes.
Causes of a bad Customized Screw can include wear and tear over time, especially from the constant motion and stress during the wash cycles.
Symptoms of a bad Customized Screw include:
This OEM LG part is also compatible with some Kenmore models.
Replaced with a new screw and everything works fine. A very simple job that only took 15 minutes. Read more
Fix a washer that won't drain or leaves standing water with a new drain pump assembly. Common DIY repair that restores proper water removal each cycle.
Had to replace the drain pump and the PSB main board. Read more
The Clutch Motor is an OEM part for LG washing machines. This motor engages the clutch mechanism, allowing the washer to switch between agitating and spinning cycles effectively.
Causes of a bad clutch motor can include wear and tear over time, electrical issues, or mechanical failure due to overloading or improper use.
Symptoms of a bad clutch motor include:
When I looked up LG washer E6 code on the web I saw the tip from LG: unplug the washer and call for service. To me that's a challenge. I saw the AppliancePartsPros.com story on Google, read it and decided to try the solution that worked for other people. A clutch shifter motor that was around $20. I checked a few local appliance parts stores and no one carried the part I needed in stock (even though their websites said available for pickup). I then ordered the part through AppliancePartsPros on... Read more
Hardware washer that sits beneath screws or nuts to distribute load and secure fasteners. Replace if bent, missing, or worn to restore proper fit.
This clutch housing assembly supports the clutch coupling in the washer's drive system, aligning and securing moving components that shift between wash and spin. Replacing a worn housing restores smooth engagement and consistent agitation and spin performance. What it does:
Washer won't start and shows door error code? This door interlock switch assembly fixes DE or DL errors when the lid won't lock. 10-15 minute repair.
Removed two screws on top of the washer, by pulling plastic covers off it exposed two Philips head long screws. Lift the top up and on the right-hand side, I removed two short Philips head screws from door lock switch. Popped old one out and had a new one in about 10-15 min. Washer starts and runs cycle no issues at all. No more DL code. Read more
Fix a leaking or cracked fabric softener dispenser with this washer softener cap. Easy DIY repair with no tools needed—just remove and replace in minutes.
Had this same problem with my previous Whirlpool washer so I knew what the problem was on my LG machine. Ordered the suspension rods and my husband and I replaced them in about five minutes. Hardest part was getting the front latches to release on the lid. I helped lift up on the drum and he put them in place one by one. Simple fix. Been running great so far Read more
Washer won't spin or agitate? This rotor assembly forms the rotating half of the direct-drive motor, restoring basket movement when worn or stripped.
Secures the stator to the motor assembly in your washer. Replace if bolt is stripped, spinning freely, or missing to restore proper motor stability.
I originally thought the washer had a bad bearing, but once I got it disassembled it the spider arms were broken. This required the replacement of the tub assembly. While replacing the tub I replaced all of the water bellows. The parts came quickly, the live chat and videos were very helpful. This washer has to be completely disassembled to replace the drum, so mark all the screw locations, tag and bag everything and take lots of pics. It was a very rewarding project and hundreds of dollars... Read more
Fix detergent leaks or dispenser jams with this washer detergent housing assembly. Routes detergent properly and replaces cracked or warped housings.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.