Ed22dfxh00 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Whirlpool part

Evaporator Fan Motor

4.8 (39)

By: Whirlpool

Part Number: 4389144

The Evaporator Fan Motor is an OEM replacement part for Whirlpool refrigerators. Located inside the refrigerator compartment, it powers the evaporator fan, which circulates air across the cooling coils. This is the motor only. For the blade order part number WP2169142.

Symptoms of a bad evaporator fan motor include:

No air movement detected coming from vents inside the refrigerator
Warmer internal temperatures due to inadequate air circulation
Strange grinding or knocking noises emanating from the rear wall

Causes of failure can be normal wear over time, accumulation of dust obstructing fan blades, or damage to motor windings from moisture penetration.

This OEM part is also compatible with KitchenAid, Jenn-Air, Admiral, and Kenmore refrigerator models.

Do-It-Yourself Stories from Customers like You Intermittant noise from freezer side of side by side kitchen aid fridge/freezer complete freezer and refrigerator seemed to maintain temp Geoffrey F. • Plantation , FL • June 27, 2017

Used U-Tube diagnostic clips to diagnose that most likely problem was a worn Evaporator Fan Motor which is located in the freezer back wall, located in the top third of the unit. I removed 6 hex head screws from the freezer's interior back panel that covers the evaporator coils. The cover is located in the lower 2/3s of the back wall. Removed all shelving. Also removed screws that held in shelf supports on one side of the freezer wall. I then removed the back panel. You may need to... Read more

$62.95

Compare At:: $81.87
You Save:: $18.92

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Compartment Door

4.7 (20)

By: Whirlpool

Part Number: WP2256101

The Compartment Door is an OEM component for Whirlpool and Kenmore built-in refrigerator models. It provides access to organized storage in the fridge's fresh food compartment. The compartment door measures approximately 15” long by 6” wide.

As a high-use access point, the door endures constant opening/closing stresses. Over extended periods, normal wear gradually reduces the quality and integrity of its cushioned sealed closure.

Symptoms include:

Difficulty fully closing/latching the compartment door
Loud squeaking or sticking during operation

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Broken crisper drawers Andrew B. • North Fort Myers , FL • November 26, 2016

I located the web site via the internet and contacted the 1-800 number. The service rep was incredibly helpful and personable. After providing her with the model number and parts needed,the process could not have been easier. My replacement parts arrived the next day a perfect match. I highly recommend using this service, first class all the way. Read more

$66.67

Compare At:: $80.00
You Save:: $13.33

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Appliance Spray Paint

4.9 (35)

By: Whirlpool

Part Number: 350930

Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.

The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.

The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage.

Symptoms needing for Appliance Spray Paint include:

Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
A desire to refresh or update the appearance of the appliance without the need for complete replacement
Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015

Replaced It With New One Read more

$24.95

Compare At:: $29.94
You Save:: $4.99

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Ice Level Arm

4.6 (16)

By: Whirlpool

Part Number: W11342242

The Ice Level Arm is an OEM part for Whirlpool refrigerators. It is an component of the ice maker, responsible for sensing the ice level in the ice bin and controlling the ice production cycle. When the ice bin reaches capacity, the ice level arm signals the ice maker to stop producing ice, ensuring efficient operation.

You should replace this ice level arm if it becomes faulty. Causes of a bad ice level arm can include mechanical wear and tear, accidental damage, or issues with the connection to the ice maker mechanism.

Symptoms of a bad Ice Level Arm include:

Continuous ice production, leading to overfilling
The ice maker not producing ice even when the bin is empty
The ice level arm not moving freely or appearing stuck

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You The ice guard came off the icemaker and got tangled up and twisted in the bottom of the tray without the guard we had way too much ice being made Sandy S. • Yantis , TX • August 22, 2015

We bought a new ice guard and installed it. It is working really good now. Read more

$45.95

Compare At:: $54.22
You Save:: $8.27

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Ice Dispenser Drum

4.9 (104)

By: Whirlpool

Part Number: 4388736

The Ice Dispenser Drum is an OEM replacement part for Whirlpool refrigerators. This drum is located in the ice maker assembly and is responsible for dispensing ice when activated. It rotates to push ice through the chute and into your glass or container.

Causes of a bad ice dispenser drum include wear and tear from regular use, damage from ice jams, or breakage due to accidental mishandling. Accumulation of ice and debris can also cause the drum to malfunction.

Symptoms of a bad ice dispenser drum include:

Ice not dispensing properly
Grinding or clicking noises during operation
Inconsistent ice output
The dispenser becoming jammed frequently

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Ice maker dispenses too little ice
Ice maker won't dispense ice

Do-It-Yourself Stories from Customers like You Broken ice dispenser drum Betty H. • Tahlequah , OK • April 13, 2014

Plastic drum was broken and wasn't pushing the ice through the crusher teeth. Received my part pronto and made the repair. Was an easy fix, took about 15 min from start to finish. Everything working very good now. ( : Thanks for getting the parts to me so fast. I will definitely remember Appliance Pro if I need parts in the future. Read more

$48.95

Compare At:: $58.74
You Save:: $9.79

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Appliance Touchup Paint

4.9 (33)

By: Whirlpool

Part Number: 72017

The Appliance Touchup Paint is an OEM product for Whirlpool appliances. This touchup paint is used to cover scratches, chips, and minor blemishes on the surface of various appliances, helping to maintain their appearance and protect them from rust and other damage. It is specifically formulated to match the original color and finish of Whirlpool appliances, ensuring a seamless repair.

Causes of needing touchup paint include everyday wear and tear, accidental impacts that cause chipping or scratching, and exposure to harsh cleaning chemicals that can damage the finish. Regular use of touchup paint can help keep appliances looking new and extend their lifespan.

Symptoms indicating the need for Appliance Touchup Paint include:

Visible scratches or chips on the appliance surface
Areas of exposed metal prone to rust
Blemishes that affect the overall aesthetic of the appliance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Chipped paint Thomas S. • Middletown , DE • September 03, 2014

Touch up paint Read more

$12.55

Compare At:: $15.06
You Save:: $2.51

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw

5.0 (2)

By: Whirlpool

Part Number: WP681249

The Screw is an OEM part for Whirlpool refrigerators, designed to secure components of the ice maker assembly. This screw maintains the structural integrity of the ice maker, ensuring that all parts are tightly fastened to prevent malfunction or inefficiency in ice production.

Causes of failure can include stripping of the screw threads through over-tightening or corrosion, leading to a less secure fit.

Symptoms of a bad Screw include:

Loose or dislodged components within the ice maker assembly.
Inconsistent or halted ice production due to components shifting.
Unusual noises emanating from the ice maker as a result of loose parts.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You The handle on the refrigerator door was broken and needed to be replaced Richard W. • Baltimore , MD • April 12, 2015

Took off the freezer door, took off the top hinge on the refrigerator door, replaced the handle, re-installed the top hinge and the freezer door. This is a two person job - one to remove the top hinge and replace the handle, while a second person holds the refrigerator door in place. Replacing the handle was easy. The most irritating part was figuring out what parts to order. The drawing of the refrigerator door (Drawing # 4) used to figure out what parts to order was not clear. I paid $8... Read more

$5.95

Compare At:: $7.08
You Save:: $1.13

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Icemaker Fill Tube Fitting

4.9 (38)

By: Whirlpool

Part Number: WP2196157

The Icemaker Fill Tube Fitting is an OEM part for Whirlpool refrigerators. This part connects the water supply line to the icemaker, ensuring a seamless and leak-free delivery of water into the icemaker mold.

Causes of a bad Icemaker Fill Tube Fitting can include wear and tear over time, mineral buildup from hard water, which can block the water flow or damage the fitting, and improper installation that may lead to leaks or restricted water flow.

Symptoms of a bad Icemaker Fill Tube Fitting include:

Water leakage at the connection points, leading to potential water damage or ice buildup in the freezer
Insufficient ice production if the fitting is partially blocked or not properly connected, restricting water flow to the icemaker
Unusual noise during the icemaker fill cycle, indicating a potential issue with the fitting

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms

Not dispensing water
Ice maker not making ice
Leaking

Do-It-Yourself Stories from Customers like You Ice maker fill tube leak Chad M. • Hollywood , FL • May 16, 2015

I watched your how-to video. It explained the repair PERFECTLY. It was an easy repair and the video was very detailed. It took the guesswork out of the repair. I was done in 5 minutes. thanks for taking the time to post videos for your parts. I'll shop here again. Best Regards, Chad M Read more

$9.60

Compare At:: $11.52
You Save:: $1.92

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Ice Maker Water Line

4.9 (22)

By: Whirlpool

Part Number: W10823511

The Ice Maker Water Line is an OEM part for Whirlpool refrigerators. It supplies water from the household plumbing to the ice maker, ensuring a consistent and reliable production of ice cubes. This kit includes a 1/4-inch plastic water line that is approximately 72 inches long. The tubing will need to be cut to match the desired length.

Causes of a bad water line can include wear and tear from prolonged use, kinks or bends restricting water flow, or leaks due to punctures or cracks. A compromised water line can result in inadequate ice production or water leaks.

Symptoms of a bad ice maker water line include:

Reduced or no ice production
Leaking water from the refrigerator
Visible cracks or damage to the water line
Ice cubes that are smaller than usual

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Not dispensing water
Ice maker not making ice
Leaking

Do-It-Yourself Stories from Customers like You Ice maker fill tube leak Chad M. • Hollywood , FL • May 16, 2015

$26.95

Compare At:: $32.07
You Save:: $5.12

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Water Valve

4.8 (85)

By: Whirlpool

Part Number: 4318046

The Whirlpool refrigerator dual solenoid icemaker water inlet valve is an OEM replacement part responsible for controlling the water flow to the refrigerator's icemaker. It is typically located at the back of the refrigerator, near the bottom, where the water supply line connects to the refrigerator. The water valve receives signals from the refrigerator's control board to open and close, allowing water to flow into the icemaker.

The Whirlpool water inlet valve can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms:

Failure to make ice or limited ice production
Loud or unusual noises coming from the water valve

This part fixes the following symptoms

Not dispensing water

Do-It-Yourself Stories from Customers like You Hollow ice cubes. Trash in ice cubes. Water leak in 12 year old ice maker. Horace A. • Clinton , MS • April 06, 2022

Hello, After watching your repair videos and reading the other comments regarding the ice maker I decided it needed to be replaced due to the old age (12 years) and mysterious flakes in the ice cubes and the solenoid valves were recommended to fix the hollow ice cube problem. After watching the repair videos on the ice maker and solenoid valves I decided I could do the replacement myself. Not needing a service technician to be called out. Also while waiting for the parts to arrive, I noticed... Read more

$48.95

Compare At:: $58.74
You Save:: $9.79

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Shelf Trim Endcap

5.0 (23)

By: Whirlpool

Part Number: WP2156006

The Shelf Trim Endcap is an OEM replacement part for Whirlpool refrigerators. This component fits on the end of the refrigerator shelf trim, providing a finished look and securing the trim in place. It helps to maintain the integrity and appearance of the refrigerator shelves, preventing items from sliding off and ensuring the shelves are securely held in place.

Causes of a bad shelf trim endcap can include regular wear and tear, physical impact from loading and unloading items, or exposure to temperature changes that can cause the plastic to become brittle.

Symptoms of a bad Shelf Trim Endcap include:

The shelf trim being loose or not staying in place
Items sliding off the shelf due to instability
Visible cracks or breaks in the endcap
Difficulty in securing the shelf trim properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Tenant broke the door shelf bar. Hanna M. • Staten Island , NY • October 27, 2017

I took the old shelf bar out the door and replaced it with the new one. Fit perfectly. Looks awesome. Read more

$10.95

Compare At:: $13.03
You Save:: $2.08

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Water Tube Assembly

4.9 (60)

By: Whirlpool

Part Number: WP4388152

The Water Tube Assembly is an OEM part for Whirlpool refrigerators. It supplies water from the inlet valve to the ice maker and water dispenser, ensuring a steady and reliable flow of water for ice production and drinking.

Causes of a bad water tube assembly can include blockages from mineral deposits, kinks or cracks in the tubing, or damage from regular use. If the tube becomes compromised, it can lead to inadequate water supply or leaks.

Symptoms of a bad water tube assembly include:

Reduced or no water flow to the ice maker or dispenser
Leaking water inside or outside the refrigerator
Ice maker not producing ice
Water dispenser not functioning properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Not dispensing water

Do-It-Yourself Stories from Customers like You Replaced of water filter then discovered a long slimy clear algae on purging system Michel L. • Rockledge , FL • March 26, 2017

After watching installation videos on each felt I could pull it off and ordered and received replacement water reservoir and water dispenser tube assembly. Reservoir installation went off without a hitch outside of the added step of the need to remove the entire main in waterline assy in order to access the connectors which also were not as represented in video, in that they were not the press-to-release type but standard threaded compression types. Water Dispenser tube/spout assembly was much... Read more

$100.66

Compare At:: $119.79
You Save:: $19.13

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Water Reservoir

4.8 (28)

By: Whirlpool

Part Number: WP2256126

The Water Reservoir is an OEM part for Whirlpool refrigerators. It stores and chills water before it is dispensed through the refrigerator's water dispenser. This component ensures that you have a steady supply of cold water available directly from your fridge.

Common causes of a bad water reservoir include cracks or leaks from regular use, exposure to extreme temperatures, or blockages from mineral deposits.

Symptoms of a bad water reservoir include:

Water leaks inside the refrigerator
The water dispenser not dispensing properly
Unusual tastes or odors in the water
Visible cracks or damage to the reservoir

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Replaced of water filter then discovered a long slimy clear algae on purging system Michel L. • Rockledge , FL • March 26, 2017

$94.22

Compare At:: $113.06
You Save:: $18.84

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw

4.8 (14)

By: Whirlpool

Part Number: WP488729

This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.

Do-It-Yourself Stories from Customers like You The lint catch was broken Misti P. • Spokane , WA • January 18, 2019

This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one. Read more

$8.36

Compare At:: $9.95
You Save:: $1.59

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Ice Mold

4.9 (41)

By: Whirlpool

Part Number: WPW10190929

The Ice Mold is an OEM part for Whirlpool refrigerators. This component forms the ice cubes in the icemaker, shaping the water into cubes as it freezes. The ice mold is crucial for the efficient production of ice, ensuring that each cube is properly formed and easily released into the ice bucket.

You should replace the ice mold if it shows signs of wear or damage. Causes of a bad ice mold can include mineral buildup from hard water, physical damage to the mold surface, or malfunctioning heating elements that prevent ice from releasing properly.

Symptoms of a bad Ice Mold include:

Ice cubes not forming correctly or being irregular in shape
Ice cubes sticking to the mold and not dispensing
The icemaker not producing ice at all
Leaks around the icemaker area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Leaking

Do-It-Yourself Stories from Customers like You Ice forming in the ice cube bin Bill J. • Scottsdale , AZ • December 13, 2014

I have a Whirlpool Side-by-side Model ED22PWXBW01. A year ago, the ice cubes started freezing together in the rear of the ice bin for no apparent reason. Although the problem started off small, it gradually grew much worse, and finally I could see water dripping out of the ice mold and into the bin during the fill cycle. Re-levelling the refrig didn’t help, nor did adjusting the cube size / fill level. With guidance from the video, I removed the icemaker from the wall of the freezer. The... Read more

$148.95

Compare At:: $175.76
You Save:: $26.81

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Refrigerator Door Gasket

4.2 (5)

By: Whirlpool

Part Number: 2159073

The Refrigerator Door Gasket is an OEM part for Whirlpool refrigerators. This gasket forms a seal around the perimeter of the refrigerator door, ensuring that cold air stays inside and warm air stays out. It helps maintain the refrigerator's efficiency by preventing air leaks, which can lead to temperature fluctuations and increased energy consumption.

Causes of a bad gasket can include regular wear and tear, frequent opening and closing of the door, or exposure to extreme temperatures.

Symptoms of a bad refrigerator door gasket include:

Warm spots inside the refrigerator
Excessive frost buildup
Increased energy consumption
The door not sealing properly or appearing misaligned

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Door seal Hector M. • Spring Hill , FL • April 10, 2016

Order part and done. you guys are amazing I was expecting my part in 7 to 10 days and got it less then 24 hours after I order. thank you.... Read more

$101.73

Compare At:: $149.03
You Save:: $47.30

IN STOCK

Ships Monday Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Ed22dfxh00 Parts

Evaporator Fan Motor

Compartment Door

Appliance Spray Paint

Ice Level Arm

Ice Dispenser Drum

Appliance Touchup Paint

Screw

Icemaker Fill Tube Fitting

Ice Maker Water Line

Water Valve

Shelf Trim Endcap

Water Tube Assembly

Water Reservoir

Screw

Ice Mold

Refrigerator Door Gasket