Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Glewfs77csb Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Dryer Drum Belt 92-1/4" 4-Rib
Genuine Whirlpool part
By: Whirlpool
Part Number: 341241

Get your dryer spinning smoothly again - install the Whirlpool 341241 OEM Drum Belt in minutes.

Why this belt?

  • Exact factory spec: 92 ¼-inch length × ¼-inch width, 4 ribs / 3 grooves - built to Whirlpool standards, not a generic copy.
  • Broad compatibility: Fits most Whirlpool-made dryers - Kenmore 110-series, Roper, Estate, Maytag, KitchenAid, Admiral, Crosley, Amana & more.
  • Quiet, durable rubber: Reinforced EPDM resists cracking and stretch for years of reliable tumbling.

Fixes these common dryer problems

Problem How the belt solves it
Drum won’t turn Transfers motor rotation to drum
Loud squealing / thumping Replaces stretched or frayed belt
Burning-rubber smell New belt stops slippage & heat build-up
Damp clothes / long cycles Restores correct drum speed & airflow


DIY install — about 15 minutes

  1. Unplug dryer; remove lint screen housing & front panel.
  2. Release belt tension at idler pulley; lift drum slightly to slide old belt off.
  3. Loop new belt around drum, idler pulley and motor pulley (ribbed side down).
  4. Re-assemble, run test cycle - enjoy quiet, consistent tumbling.

This part fixes the following symptoms
  • Heat stays on after drum has stopped
  • Will not tumble
  • Touchpad does not respond
  • No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You Broken dryer belt   Bob B. • St Louis , MO • September 12, 2015

Unpluged dryer first. Then took the lint filter out and removed the two philips screws inside the lint filter lid. Then take a paint scraper just under the top of the dryer two inches from the left front corner and pushed in a little to release the snap connector and did the same on the right side. Then lifted top over. Then take a 5/16 socket or nut driver and remove the two screws on on the left inside panel, then the right side. Lean front out a little and remove the two wires one the back... Read more

More
$14.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Rear Drum Support Roller Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 349241T

Rear drum support roller kit for dryers. Mounts behind the drum to maintain alignment and smooth rotation. Replace when rollers are worn or damaged.

This part fixes the following symptoms
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Thumping/vibrating/rattling pretty bad fixed 100%!   Doug P. • Durham , NC • November 15, 2015

I am very glad to find the AppliancePartsPros.com website! Their instructional videos and easy parts reference made all the difference. I had originally planned to have someone come to fix my dryer, but no one was available for at least a week. I checked out their site, and after watching the videos I felt confident I could repair my appliance. I determined that a drum roller wheel had gone bad. Apparently it was going bad over the last five years since the dryer always seemed to rattle a... Read more

More
$18.23

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Idler Pulley
Genuine Whirlpool part
By: Whirlpool
Part Number: WP691366

Idler pulley maintains belt tension in your dryer drum assembly. Replace if the wheel is cracked, bracket is broken, or pulley has worn bearings.

This part fixes the following symptoms
  • Will not tumble
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You Thumping/vibrating/rattling pretty bad fixed 100%!   Doug P. • Durham , NC • November 15, 2015

I am very glad to find the AppliancePartsPros.com website! Their instructional videos and easy parts reference made all the difference. I had originally planned to have someone come to fix my dryer, but no one was available for at least a week. I checked out their site, and after watching the videos I felt confident I could repair my appliance. I determined that a drum roller wheel had gone bad. Apparently it was going bad over the last five years since the dryer always seemed to rattle a... Read more

More
$15.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Refrigerator Ice Maker Kit
Genuine Ge part
By: Ge
Part Number: WR30X10093

Ice maker not producing ice or stopped working? This ice maker kit restores ice production. Includes full assembly for harvesting and ejecting ice.

This part fixes the following symptoms
  • Ice maker not making ice
  • Ice maker won't dispense ice
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You No ice and leaking water   Jeff P. • Pinecrest , FL • November 01, 2019

Much easier than expected, I was certain it had to be a water line but the solved everything Read more

More
$195.69

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Drive Motor
Genuine Whirlpool part
By: Whirlpool
Part Number: 279827

Dryer won't start or stops mid-cycle? A worn drive motor is often the cause. This motor turns the drum and circulates air. Moderate DIY repair.

This part fixes the following symptoms
  • Will not tumble
  • Noisy
  • Shuts off too soon
See more...
Do-It-Yourself Stories from Customers like You High pitched squeal: maybe a roller wheel maybe a bad felt bearing on drum maybe a rubbing fan wheel or just a burned out motor!   Bruce K. • Pikeville , KY • September 06, 2014

My 12 year old Kenmore dryer problem started about 3 years ago with the motor just stopping. My thing was: I would turn it off and turn the drum by hand about halfway around and it would work again. Last month, my wife said it stopped again and its making a loud noise, but when I did "my thing" it still made a loud squealing noise (like I was killing a mouse). I made time to work on it the next day, I took it apart, using the video instructions from AppliancePartsPros, I removed the top,... Read more

More
$97.47

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Door Latch Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 279570

The Door Latch Kit is an OEM replacement part for Whirlpool washers. This component is responsible for securely locking the washer door during the wash cycle, preventing it from opening unexpectedly and ensuring a safe and efficient operation.

Symptoms of needing to replace the door latch kit include:

  • Difficulty in closing or latching the washer door
  • Door opening unexpectedly during the wash cycle
  • Leaks or water seeping due to an improper door seal
  • Excessive wear or damage to the latch components

Causes of a faulty door latch kit can include normal wear and tear over time, physical damage due to impact or mishandling, or issues with the door alignment or strike plate.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.

This part fixes the following symptoms
  • Door won't close
  • Shuts off too soon
  • Doesn't shut off
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You Dryer door latch worn out   Kathy M. • San Diego , CA • February 22, 2015

When I looked up the part number there was a handy video that popped up. I watched the video and thought "how easy!" so, I ordered that part and waited. The next day, I thought I better start to take the door off of my dryer (because that's what the video instructed, and I wanted a head start) so as I was going into the garage to get my tools, my son came in with a small package. It was the part. That came, to quote another customer, "Crazy Fast!" All the way from Kentucky to California! ... Read more

More
$8.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Heating Element Connecting Wire
Genuine Whirlpool part
By: Whirlpool
Part Number: 279457

Connects power to your dryer's heating element. Replace this wire if it's frayed, burned, corroded, or broken to restore the electrical connection.

This part fixes the following symptoms
  • No heat or not enough heat
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You Electric dryer ceased to produce heat   Glenn M. • South Windsor , CT • September 23, 2016

Our 25-year-old Whirlpool dryer abruptly stopped producing heat, though it was otherwise running normally. The unit had never required service of any type and we were reluctant to replace it. After confirming that no circuit breakers had tripped, I reviewed the Whirlpool and AppliancePartsPro websites and concluded that the most likely causes of the problem were a failed heating element and/or thermal fuse. I ordered both (they arrived in two business days), installed them and the dryer... Read more

More
$9.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Drum Support Wheel Retainer
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10512946

Secures drum support rollers to their shafts in your dryer. Replace if broken, missing, or damaged during roller maintenance to keep drum wheels stable.

This part fixes the following symptoms
  • Will not tumble
See more...
Do-It-Yourself Stories from Customers like You My whirlpool duet dryer started to squeal and rumble when the dryer was on   Diana K. • Phoenix , AZ • September 20, 2014

I did a little research and found out that the dryer drum rollers needed to be replaced. I decided that since I would be replacing the 4 drum rollers that I should replace the belt and the belt drive pulley. This was a simple project thanks to YouTube. I used one of appliancepartspor videos to st me through the repair. Now I have a dryer that does not squeal like a pig! Read more

More
$11.78

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Blower Wheel
Genuine Whirlpool part
By: Whirlpool
Part Number: WP694089

This is the blower wheel that mounts on the motor shaft inside the dryer and circulates heated air through the drum and out the exhaust vent. It draws moist air away from clothes to facilitate drying. Replace this part if the dryer is noisy, makes a rattling or squealing sound, takes too long to dry clothes, or if the blower fins are cracked or broken.

This part fixes the following symptoms
  • Will not tumble
  • Takes too long to dry
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Broken blower wheel on dryer   Mark B. • Independence , WV • April 12, 2014

I FOUND the website on t internet, found my part ordered it and watched the how to video ,repaired the dryer myself. Awesome Website. Read more

More
$34.75

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Lint Screen Housing Foam Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: WP339956

Seals the lint screen housing to prevent air leaks and maintain proper airflow. Replace if damaged, missing, or causing lint buildup. Verify fit.

This part fixes the following symptoms
  • Takes too long to dry
  • No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You Gas dryer did not heat and excessive lint inside the unit   James C. • New Boston , MI • July 20, 2017

Our 19 year old Whirlpool dryer quit heating. After checking the thermal fuse, I found the ignitor electrically open. I bought an ignitor at a local store as there was a national holiday the next day and I did not want the dryer inoperative waiting several days for shipping. I can say AppliancePartsPros is MUCH cheaper for the identical Whirlpool genuine part. While changing the ignitor, I noticed there was an excessive amount of lint in the dryer, which was caused by worn drum seals. I ordered... Read more

More
$9.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Oven Temperature Sensor
Genuine Frigidaire part
By: Frigidaire
Part Number: 316217002

Fix F1, F3, or F10 error codes and inaccurate oven temperatures with this sensor. Simple DIY replacement takes about 30 minutes with basic tools.

This part fixes the following symptoms
  • Oven is too hot
  • Oven not heating evenly
  • Little to no heat when baking
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You Error code F10   Dan H. • Culver City , CA • December 27, 2019

Bought a used Frigidaire 36 inch stove. The broiler didn't come on but the burners lit and the stove worked so I made do for about 4 or 5 years with that. Then the F10 code came up and it wouldn't stop beeping until I unplugged it. I figured the electronics/circuit board was probably bad and ordered a replacement. I was confused about what part to order. The parts list includes "Control Panel" and "Clock - Timer". Turns out the control panels are the glass panel on the front of the stove... Read more

More
$61.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Blower Housing Foam Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: W11415783

This is a foam seal that fits around the dryer's blower housing or lint chute area, creating an airtight connection to prevent air leaks. It helps maintain proper airflow through the dryer's exhaust system for efficient drying. Replace this seal if you notice longer drying times, warm air escaping from areas other than the vent, or if the existing seal is crumbling, compressed, or deteriorated.

Do-It-Yourself Stories from Customers like You Gas dryer did not heat and excessive lint inside the unit   James C. • New Boston , MI • July 20, 2017

Our 19 year old Whirlpool dryer quit heating. After checking the thermal fuse, I found the ignitor electrically open. I bought an ignitor at a local store as there was a national holiday the next day and I did not want the dryer inoperative waiting several days for shipping. I can say AppliancePartsPros is MUCH cheaper for the identical Whirlpool genuine part. While changing the ignitor, I noticed there was an excessive amount of lint in the dryer, which was caused by worn drum seals. I ordered... Read more

More
$16.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Drum Roller Shaft
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10359270

Left-side shaft that supports the drum roller assembly in your dryer. Replace if worn, bent, or damaged to restore proper drum rotation and alignment.

Do-It-Yourself Stories from Customers like You Old appliance with worn drum roller shafts and rollers   Macario M. • Kingsville , TX • December 17, 2021

Use the videos on this website here and you can repair most brands. Many are duplicate in design. 1. Unplug the machine. 2. Move it away from a confined area to get more room. 3. Remove lint filter and the two screws that hold the exhaust filter port to the top of the cabinet. 4. Use a putty knife or actually a butter knife and release the top of the cabinet from the main drum housing. You will slide the knife between the top and the main cabinet at the plastic catches. Look for them and you... Read more

More
$54.25

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Light Bulb (40W)
Genuine Frigidaire part
By: Frigidaire
Part Number: 316538904

The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.

Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.

Symptoms of a bad Light Bulb include:

  • The oven interior remains dark when the light switch is engaged.
  • Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
  • Completely non-functional light, which can hinder your ability to monitor cooking progress.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Do-It-Yourself Stories from Customers like You The bottom heating element wasn't working in top oven   Kevin Scott W. • Parker , CO • January 09, 2015

Before we replaced the board, my wife tried to replace just the element. We had one we had ordered several years ago when this same thing happened. When that didn't work we replaced the board and could see where the old board was damaged so we figured this was the solution. It would have been except the bottom element my wife used to replace the old element (which was fine but had been thrown out figuring the new one was new so why keep the old one) was 1" shorter in the back than the old... Read more

More
$21.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Door Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: W10820036

The Washer Door Switch is an OEM part for Whirlpool washing machines. This component is crucial for ensuring the washer operates safely by detecting whether the door is open or closed. The door switch prevents the washer from starting or continuing its cycle when the door is open, and it allows the machine to function only when the door is securely closed.

Symptoms of a failing Washer Door Switch include:

  • The washer not starting or stopping unexpectedly during a cycle
  • Error codes related to door closure issues displayed on the washer's control panel
  • The washer door not locking properly or the lock mechanism not engaging
  • The washer continuing to operate with the door open

Causes of a bad door switch can include wear and tear from frequent use, damage from repeated opening and closing of the door, electrical faults such as short circuits, or physical damage from mishandling or impact.

This OEM Whirlpool part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.

This part fixes the following symptoms
  • Will not drain
  • Pumps but will not spin
  • Timer will not advance
  • Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You Sometimes the washer wouldn't start the wash cycle when the fill cycle was done it would just sit until the lid was picked up or bumped   Eugene N. • Roswell , NM • August 28, 2016

The lid shut-off switch is located behind the lid How About That. I order the plastic ball the hold the lid in place plus the lid shut off switch. I watched the video that AppliancePartsPros.com has on how to replace the lid and the plastic balls. I removed the lid to get to the two philips head screws to remove that part of the shut-off switch. I took the new switch out of the package and compared it to the old switch. I assembled the switch just like the old switch look using the new... Read more

More
$22.53

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Lint Screen
Genuine Whirlpool part
By: Whirlpool
Part Number: 339392V

Captures lint and debris during drying to maintain airflow and prevent vent clogs. Replace if torn, frayed, or handle is broken. Verify fit by model number.

This part fixes the following symptoms
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You Noisy & inefficient   Richard M. • Indianapolis , IN • December 06, 2016

After having replaced the drum support rollers twice in a roughly 3yr period, I realized something wasn't quite right, and indeed it wasn't. I had been ordering the wrong parts - I did use the online parts locator after checking, & double checking my model number. Apparently my older Whirlpool dryer has a somewhat ambiguous model number because the rollers that were shipped each time looked nothing like the originals. I realize that is not particularily uncommon - manufacturers often modify... Read more

More
$34.95

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google