Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Glsw1339cs1 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Agitator Cap
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3355758

The Agitator Cap is an OEM part for Whirlpool washing machines. It fits on top of the agitator and helps secure the agitator components, ensuring proper functioning during the wash cycle. This cap is essential for maintaining the agitator's efficiency and preventing water from entering the agitator assembly.

Causes of a bad agitator cap can include wear and tear from regular use, cracking or damage from impacts, or degradation due to exposure to detergents and water over time.

Symptoms of a bad agitator cap include:

  • The cap being loose or not fitting properly
  • Water leaking into the agitator assembly
  • Excessive noise during the wash cycle
  • Reduced agitation performance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Chewed up upper agitator   William M. • Woodhaven , NY • May 17, 2015

Slipped old one off slipped new one on Read more

More
$9.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Tub Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: W11095997

Seals the washer shaft to prevent water leaks from the tub during wash cycles. Replace if you notice water pooling under your machine. Verify fit.

Do-It-Yourself Stories from Customers like You Agitator would not work   David W. • Murfreesboro , TN • November 19, 2014

Used the parts and youtube video from your company. Read more

More
$23.61

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Hose Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: WP285655

The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.

Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

  • Water leaks around the hose connection points
  • The hose slipping off the fitting
  • Visible rust or wear on the clamp
  • Difficulty in tightening the clamp to secure the hose

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Syphonbreak was leaking   James O. • Bryant , AL • September 04, 2015

We ordered parts from appliance parts pros and I fixed it. Read more

More
$9.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Outer Tub Ring Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3976308

Maintains watertight seal between outer tub and tub ring, preventing leaks during wash and spin cycles. Replace if leaking from top of drum or spin issues.

Do-It-Yourself Stories from Customers like You My washing machine smelt horrible   Bryan W. • Ogdensburg , NY • August 20, 2018

First off I have to say that Appliance Parts Pro's saved me from hiring a repair person, and quite possibly just getting rid of my washing machine. Their video's helped out SOOOOOOOO much and the advice one of their agents gave me over their online chat helped me trouble shoot something when I got stuck. On top of this they shipped my parts fast enough that less than 12 hrs later they arrived, which allowed me to get my machine up and running way faster than the other options I had available.... Read more

More
$21.46

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Cover Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3349985

Prevents water leaks between washer cover and tub during wash cycles. Replace if leaking or water escapes during washing. Verify fit with model number.

Do-It-Yourself Stories from Customers like You Washer would not spin   Joseph S. • La Grange , KY • February 14, 2016

Disassembled and confirmed the clutch was bad. Also noticed a slight leak from the transmission shaft seal. Ordered replacement clutch, seal and oil from appliancepartspros.com. The parts arrived very quickly and exactly as ordered. Their repair videos were very accurate and made the job easy. I accomplished a quality repair at a reasonable cost. My thanks to the folks at appliancepartspros.com for making it possible! Read more

More
$20.38

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Drum Bearing Bracket
Genuine Frigidaire part
By: Frigidaire
Part Number: 131724301

This metal bracket supports the drum bearing at the rear of the dryer, helping to hold the drum in proper alignment as it rotates. It provides a stable mounting point for the bearing assembly that the drum rides on. Replace this bracket if the dryer makes squealing, grinding, or thumping noises during operation, or if the drum wobbles and does not spin smoothly.

Do-It-Yourself Stories from Customers like You Dryer drum would not turn   J Kent I. • Anderson , IN • February 22, 2019

I watched the helpful diy video. It gave me what the problem was and the confidence to do it. Took my dryer apart with the helpful hints in the video repair went smooth. Works like a dream and I saved money. Thank you appliance parts pros. Read more

More
$9.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Spin Bearing
Genuine Frigidaire part
By: Frigidaire
Part Number: 3204405

Enables smooth drum rotation in your washer. Replace if you hear loud roaring or whirling noises during spin cycle. Confirm fit with your model number.

Do-It-Yourself Stories from Customers like You Noisey bearing on spin cycle   Neal G. • Klamath Falls , OR • February 14, 2016

I replaced the spin bearing, tub seal, washer and drive belt since I had it all apart. The video was extremely helpful...I would have tore the whole thing apart trying to figure out how the agitator came off....but it was very simple. Read more

More
$85.76

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Range Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8273062

This range screw is an OEM replacement part sourced directly from the manufacturer for gas stove burners. These screws attach the ignitor to the burner. Screws may corrode and rust during everyday use. Spills and accidents on the range top may leak down to the screws and cause them to become worn. Screws are not considered part of the ignitor kit or burner kit and will need to be purchased separately. If the screws appear rusty or corroded while replacing the ignitor, it is beneficial to replace them. It is a good idea to purchase the screws at the same time as the parts are purchased so that they are available when needed. A Phillips head screwdriver is necessary to remove and replace the old screws. Make sure the power and gas are disconnected before installing the new screws.This screw is made of silver metal and is a Phillips head screw that is sold individually. Verify the number of screws needed before ordering. This screw is designed for use in gas ranges manufactured by Whirlpool, KitchenAid, Roper, Estate, Inglis, Maytag, Amana, Jenn-Air, and Crosley.

Do-It-Yourself Stories from Customers like You Worn top burner igniter   John D. • Huntington Beach , CA • January 01, 2018

Replaced old igniter. also purchased new screws for burner and igniter assembly since old screws were corroded from spilled food/fluids etc over the years. made the installation much easier. If you need to replace a worn igniter, do yourself a favor and go to hardware store and get matching replacement screws or buy new with igniter. Now my front right burner lights every time with just a click or two. Very pleased. Read more

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Lid Strike
Genuine Whirlpool part
By: Whirlpool
Part Number: WP358684

Washer won't spin or drain? A broken lid strike prevents the lid switch from detecting when the lid is closed. Easy 10-minute DIY fix with basic tools.

This part fixes the following symptoms
  • Will not agitate
  • Will not drain
  • Won't start
  • Timer will not advance
See more...
Do-It-Yourself Stories from Customers like You The spin cycle would not initiate pump to drain tub   Douglas B. • Skull Valley , AZ • January 21, 2017

Ordered new lid switch and plunger. Watched help videos and installed new parts, Washer works like new. Read more

More
$9.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Water Inlet Valve Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 134190200

Washer won't fill with water or only fills with hot? The water inlet valve controls water flow into the tub. DIY repair takes about 30 minutes.

This part fixes the following symptoms
  • No hot or cold water
  • Will not stop filling with water
  • Will not fill with water
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You The washer was filling very slow especially cold water.   Wayne S. • Oakland , MD • February 10, 2023

This is my third repair of this type. The first was a stand-alone washer and was very easy, because there was a plate on which the inlet valve assembly was mounted, and it was easily removed. This repair was on a Frigidaire stacked washer/dryer (laundry center). Stacked washer/dryers are typically purchased to save space and are often tucked into a closet. Be sure you can pull it out to access both front and rear. Remove drain hose from drain, detach water hoses, electricity and dryer vent... Read more

More
$117.67

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Spin Bearing Washer
Genuine Frigidaire part
By: Frigidaire
Part Number: 5308002401

The Spin Bearing Washer is an OEM part for Frigidaire washing machines. Situated inside the transmission housing, this thin metal washer acts as a subsurface support for the belt pulley bearing. The spin-bearing washer facilitates smooth, balanced rotation essential for agitated and spun wash cycles.

Causes of a bad spin-bearing washer include wear and fatigue from years of successive rotations, potentially allowing excessive movement between housing components.

Symptoms of a bad spin-bearing washer involve:

  • Vibration or shaking noises coming from inside the washer cabinet
  • Belt slippage wasting energy by inefficiently spinning loads
  • Increased friction resulting in longer cycle times for spins
  • Failure of belts or other components from unsupported bearing

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This part fixes the following symptoms
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Noisey bearing on spin cycle   Neal G. • Klamath Falls , OR • February 14, 2016

I replaced the spin bearing, tub seal, washer and drive belt since I had it all apart. The video was extremely helpful...I would have tore the whole thing apart trying to figure out how the agitator came off....but it was very simple. Read more

More
$13.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Clutch Retaining Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10080230

Washer won't spin or leaves clothes wet? This clutch retaining clip secures the clutch assembly for proper transmission engagement. DIY repair.

Do-It-Yourself Stories from Customers like You Washer would not agitate   Robert C. • Newark , DE • September 25, 2014

Took washer apart to find a bad Neutral Drain Transmission. Ordered part from here and fixed with no problems. Read more

More
$7.78

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Door Strike
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303207102

Dryer door won't stay closed? The door strike secures the door latch during operation. Quick DIY fix—installs from the front in minutes.

This part fixes the following symptoms
  • Door won't close
See more...
Do-It-Yourself Stories from Customers like You Frigidaire dryer door would not stay closed   Carolina L. • Miami , FL • September 08, 2015

My dryer door would not stay shut because the door strike was stuck in the door catch. I was afraid that when I pulled the strike out, it would damage the catch, so I ordered the door strike and door catch. I got the damaged door strike out with needle nosed pliers in about 15 seconds. The door catch was in perfect condition so I didn't need to use the one I ordered. So then I proceeded to install the new door strike. That took me about 15 minutes because I did not have the manual strength to... Read more

More
$34.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Neutral Asy Pack
Genuine Whirlpool part
By: Whirlpool
Part Number: 388253A

The Neutral Drain Kit is an OEM part for Whirlpool washing machines. This kit facilitates the neutral drain function, which allows the washer to drain water without spinning the tub, ensuring efficient water removal before the spin cycle begins.

Causes of a bad neutral drain kit can include wear and tear over time, mechanical failure of the components, or damage due to improper installation or handling. A faulty neutral drain kit can lead to draining issues, affecting the overall performance of the washing machine.

Symptoms of a bad neutral drain kit include:

  • Washer not draining properly
  • Extended or incomplete drain cycles
  • Water remaining in the tub after the drain cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Teeth stripped from gear in transmission   Robert G. • Wentzville , MO • June 17, 2015

The parts I purchased from Appliance Parts Pro fit perfectly and were reasonably priced. I received them the next day, which made the Wife (and me) very happy. Although Appliance Parts Pro did not have a repair video for this, I was able to find one online and the machine is washing like new again. The website is well laid out and easy to find what your looking for. Between the available parts and the videos they provide, anyone who is reasonably handy should be able to repair their machine as... Read more

More
$53.72

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Appliance Cover Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP308685

Screw secures appliance panels and access covers. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattles or gaps.

Do-It-Yourself Stories from Customers like You Under the counter mounting brackets were missing   Douglas A. • Glen Allen , VA • June 19, 2019

After several attempts at Local Hardware stores and Lowe's and Home Depot to find them I called AppiancePartsPros.com. I gave them the model number and what I was looking for and customer service directed me to the part on the Web site. They were extremely helpful and it was very fast and I got the parts the next day. Read more

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Rear Leveling Leg
Genuine Whirlpool part
By: Whirlpool
Part Number: 285244

The Rear Leveling Leg is an OEM part for Whirlpool washing machines. It provides support and adjustment capability to compensate for uneven surfaces or flooring. By adjusting the height of the rear leveling leg, you can achieve a balanced and stable position for your appliance.

Causes of a faulty or damaged rear leveling leg can include regular use, accidental impact, or wear and tear. A damaged leveling leg can lead to an unstable appliance, increased vibrations, or difficulty in maintaining a level position.

Symptoms of a bad rear leveling leg may include:

  • Appliance wobbling or rocking during operation
  • Uneven distribution of weight
  • Difficulty in aligning the appliance with adjacent units or countertops

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Washing machine shook terribly   Edward L. • Temecula , CA • August 09, 2015

Replace front legs and rear legs took about 30 minutes. Made sure rear legs had lithium grease applied ran a load of wash very little Vibration nothing compared to before legs were installed and balanced the machine with a level. Read more

More
$25.76

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google