Gsh25jsrfss25jstfss Parts
Genuine Ge part
By: Ge
Part Number: WR38X23216
Damaged or cracked dispenser trim? This trim snaps around your refrigerator's water and ice dispenser opening for a finished look. DIY repair in 20 minutes.
Do-It-Yourself Stories from Customers like You
Had to replace water dispenser lever ass'y Larry B. • Knoxville , TN • April 26, 2015
After viewing your video the job went as planned and took maybe 20 minutes.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X23255
This ice bucket assembly is a genuine LG part, sold individually. This ice bucket assembly can be used as a replacement part in a refrigerator. This part stores and dispenses ice produced by the ice maker.This ice bucket assembly is a complete replacement for a damaged or broken ice bucket. Usually, if an ice bucket isn't dispensing ice properly, it's because of the augur. Symptoms of a defective augur can include an ice maker that will not dispense ice, that will not make ice, that uncontrollably dispenses ice, or that does not dispense as much ice as usual. If this is the case, the ice bucket should be removed and replaced with this genuine OEM replacement part before using the ice maker again.This is an OEM part sourced directly from the manufacturer. This ice bucket assembly is compatible with the following appliance brands: General Electric, RCA, and Hotpoint.
This part fixes the following symptoms
-
Ice maker dispenses too little ice
-
Ice maker dispenses too much ice
See more...
Do-It-Yourself Stories from Customers like You
Needed a new ice drawer / combo crusher Edward P. • New Milford , CT • August 01, 2014
Pulled the old one out, slid the new one in.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR09X10050
The Refrigerator Damper and Gasket Assembly is an OEM replacement part for GE refrigerators. It includes a moving damper plate that regulates airflow through vents, as well as its surrounding sealing gasket.
Symptoms of a bad assembly include:
- Inability to maintain proper internal temperatures
- Frost or condensation buildup inside from restricted airflow
- Odors or flavors transferring between compartments
- Noisy ventilation from a loose damper plate
Causes of a bad assembly can be worn over extended use, cracks forming in the damper component itself, or a degraded gasket failing to seal properly.
This genuine GE replacement is compatible with additional GE refrigerator brands including Hotpoint and RCA.
Do-It-Yourself Stories from Customers like You
Refrigerator warm/not cold but freezer was cold Angela H. • Sicklerville , NJ • August 18, 2015
Replaced the damper and gasket assembly and the refrigerator is working like a charm. The package was shipped and I received it in a day and a half! Great service; I will definitely use again if the need arises.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X10745
The Dispenser Drip Tray is an OEM part for GE refrigerators. It's placed beneath the water and ice dispenser to catch drips and spills, preventing water from running down the front of the refrigerator or onto the floor. This part not only helps in keeping the dispensing area clean but also minimizes the risk of slip hazards caused by wet floors.
Over time, the dispenser drip tray can become stained, cracked, or warped, affecting its appearance and functionality.
Symptoms of a bad Dispenser Drip Tray include:
- Persistent stains or discoloration that cannot be cleaned
- Cracks or warping that prevent the tray from fitting properly
- Water leakage due to the tray not catching drips efficiently
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Melted the water dispenser parts trying to unfreeze the water line Janie M. • Pasadena , CA • February 18, 2015
Was an easy swap. Ordered the pieces, got them withing two days. Didn't realize a hair dryer would melt so much of the plastic pieces that I couldn't even see while trying to defrost the water line in the door. Next time it happens I will just empty the freezer and leave the door open for a few hours. Will save me from making this mistake again. Thankfully easy to replace the parts myself and not too expensive.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR02X12454
The Front Roller Assembly is an OEM part for GE refrigerators. It's designed to support the front part of the refrigerator, allowing for smooth and easy movement when you need to shift the appliance for cleaning, maintenance, or repositioning. This roller assembly ensures the weight of the refrigerator is evenly distributed, reducing strain on the floor and making it easier to move the refrigerator without damaging the flooring or the appliance itself.
Causes of a bad Front Roller Assembly can include wear and tear from regular use, damage from moving the refrigerator improperly, or corrosion over time.
Symptoms of a bad Front Roller Assembly include:
- Difficulty moving the refrigerator
- Uneven positioning or tilting of the refrigerator
- Excessive noise or resistance when attempting to move the appliance
- Visible wear or damage to the rollers
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
GE refrigerator front and rear wheels. The rubber shell on the wheels had cracked and peeled off. Carl C. • London , OH • August 18, 2023
The front wheel assembly replacement (WRXO2X12454) was straightforward and easy to do. Took maybe 30 minutes start to finish.
The rear wheel assembly (wheel WRO2X10695 and axle WRO1X10604) that was more involved as the original wheel axle is actually a rivet that you have to cut out.
1. I used a vibrating multitool with a carbide blade to cut the axle out. Had to use a pair of vise grips to hold the rivet to keep it from spinning while cutting it.
2. The new axle I drilled a 2mm hole thru the...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR14X10052
White foam gasket that seals refrigerator shelf edges. Replace if worn, cracked, or missing to prevent spills and maintain proper support. Verify fit with your model number.
Do-It-Yourself Stories from Customers like You
Broken shelf fixed fast! Liza B. • Concord , NC • May 06, 2019
Great site to DIY! Purchased fresh produce drawer railing and parts. Fixed in under 10 minutes.
Thanks so much!
Read more
More
Genuine Ge part
By: Ge
Part Number: WR32X10381
Do-It-Yourself Stories from Customers like You
Broken shelf Charles D. • Lake Zurich , IL • January 23, 2015
Ordered the new shelf from Appliance Parts Pros, which was a genuine OEM part and much less expensive than the GE Store. Lifted the old shelf out, popped the new one in and it was done. two minutes.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR01X10604
Do-It-Yourself Stories from Customers like You
GE refrigerator front and rear wheels. The rubber shell on the wheels had cracked and peeled off. Carl C. • London , OH • August 18, 2023
The front wheel assembly replacement (WRXO2X12454) was straightforward and easy to do. Took maybe 30 minutes start to finish.
The rear wheel assembly (wheel WRO2X10695 and axle WRO1X10604) that was more involved as the original wheel axle is actually a rivet that you have to cut out.
1. I used a vibrating multitool with a carbide blade to cut the axle out. Had to use a pair of vise grips to hold the rivet to keep it from spinning while cutting it.
2. The new axle I drilled a 2mm hole thru the...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR02X11561
Do-It-Yourself Stories from Customers like You
Ice maker stopped working. Jorge J. • Winter Garden , FL • April 05, 2019
Replaced Ice maker very easy.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR02X11478
Do-It-Yourself Stories from Customers like You
Creaked when doors closed Albert H. • Ewa Beach , HI • June 08, 2021
Replaced all four cams. It was very easy to do. I didn’t even have to turn off the fridge. You should though when touching electrical connections. The hardest part was aligning the pegs with the holes by myself. Hard to do when balancing the door. Otherwise piece of cake. Thanks guys.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR02X11476
Do-It-Yourself Stories from Customers like You
Clogged drain tube Keith P. • Ivoryton , CT • March 03, 2017
Swapped it out for new tube. Take 5 minutes and zero effort. The drain tube will clog with mold. You can clean it out but the tube will clog again despite's you best efforts as the tube wall provide a great habitat. Ordered new tubes to facilitate swap-outs. Old tubes can be cleaned but will recolonize quickly.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR32X10595
Do-It-Yourself Stories from Customers like You
12 y o rental unit ge side by side was missing parts and dispenser was non functional Scott M. • Asheville , NC • October 04, 2015
First I ordered a new ice door seal, spring, and crank, figuring the condensation in freezer and door was caused by ice door not sealing. Turns out the solenoid for the ice door was completely rusted and was the primary cause, if it had been replaced early, it would have saved the dispenser board. What then happened was the moisture in the freezer door damaged the control board rendering dispenser controls inoperative as well as the heater around the dispenser. Now the freezer door is dripping...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR14X10045
Do-It-Yourself Stories from Customers like You
In my side by side refrig the upper portion of the unit became warm while the lower half was cool to cold. Ivory P. • Aurora , CO • April 11, 2022
I ordered the heater unit from your website as well as a new evaporator panel gasket and thermostat. Once I removed the evaporator panel from the rear wall of the freezer side, I used a steamer machine I had to melt all the ice which had accumulated, I replaced the faulty heater unit and all is well.
By-the-way, I consider your website amongst the very best and easy to use. I appreciate how well your developers and designers created the diagrams/pictures with numbered parts displayed,...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR71X10232
Color: white. It measures about 16.5 inches wide by 4 inches high by 5.5 inches deep.
Do-It-Yourself Stories from Customers like You
Got free frig but door shelves wrer missing Glen S. • Virginia Beach , VA • March 27, 2016
Replaced shelves
Read more
More
Genuine Ge part
By: Ge
Part Number: WR21X10016
Do-It-Yourself Stories from Customers like You
Wornout parts Diego J. • Hialeah , FL • December 15, 2015
Very easy to replace the trays slide the broken one out, slide the new one in, no problems.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR02X12254
Do-It-Yourself Stories from Customers like You
The front rollers had deteriorated and the refrigerator could not be moved without damaging the floor. Michael G. • Pulaski , TN • January 08, 2022
Replacing the roller assembly corrected the problem. The key to replacing the roller assembly is elevating the refrigerator high enough to remove the roller assembly. (1) Raise and secure the refrigerator, (2) remove the metal bar across the bottom of the refrigerator to provide adequate access to the roller assembly (2-screws), (3) remove the roller assembly adjustment screw, (4) pry the roller pivot pin out, (5) pull the roller assembly toward the front of the refrigerator to remove, (6)...
Read more
More