Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Lid Bumper is an OEM part for GE refrigerators. It is designed to provide cushioning and protection for the refrigerator lid, preventing damage and ensuring smooth, quiet closing.
Causes of a bad Lid Bumper can include deterioration o
Changed fan motor, rubber grommets, and dust cover. It sounded like the vibrating sound was being caused by the motor. But, come to find out I had a chipped blade on one of the fan blades. So make sure and check the fan blade first. Thanks Appliance Parts Pros everything for just as it should. Read more
Replacement glass cover for refrigerator meat pan drawer. Installs over bottom sealed pan. Order when original is cracked, shattered, or broken.
I ordered my parts. It was a breeze thanks to appliancepartspros.com. I received the parts the next day. Installed them myself. Read more
Decorative base grille panel that covers the condenser area at the bottom front of your refrigerator. Replace if cracked, broken, or missing.
Replaced two drawers, one shelf front, and the grille base Read more
Ice dispenser only making crushed ice instead of cubes? This solenoid valve kit fixes the cube/crushed ice selector. Easy DIY repair with video guide.
This was a two and half year issue as different things failed at different times. I would get one part, then another would fail. Ultimately, I got to a point where what failed, I hadn't been ordered the part yet. The seal on the freezer door took three bathing's before it plumped up and un-creased. The directions on the box it is shipped in said to heat the seal up in hot water then cool it down with tap water. I didn't need to do that. It took a lot of massaging of the seal, but... Read more
Spring that controls dispenser arm movement in refrigerators. Installs on the paddle assembly. Replace if broken, detached, or missing to restore arm function.
I order both the paddle and spring and watched a video on how to remove the operating panel to replace them Read more
The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments.
All light bulbs will eventually burn out with consistent use over many yea
I changed the motherboard - computer and also changed the motor in the freezer, because it was doing a howling sound every time it turned on. The repair technician asked for $500 for a repair and that is on top of the $230 I paid him two days before. I looked up the parts and decided to try myself and it paid off. Great instructional videos. Thanks Read more
Replacement drawer cover for refrigerator vegetable and deli bins. Replaces cracked, broken, or missing covers. Protects contents and seals drawer.
Our refrigerator takes care of my wife and I, along with our children when they visit, and the grand kids. Over the years, it's seen its fair share of wear and tear. Thankfully, nothing major has happened that hasn't been able to be repaired right here in the home, and by me. Our refrigerator is a GE side-by-side with an ice maker/water dispenser, and has held up well. I've ordered parts for it from AppliancePartsPros.com for all of its repairs, and while GE/Frigidaire have been changing out a... Read more
The Main Control Board is an OEM replacement part for GE refrigerator models. As the central processing unit, it regulates all major refrigerator functions including cooling, temperature settings, cycles, and displays.
Symptoms of a bad m
I have troubleshooted a lack of defrost on a fridge via testing of the heating element, the thermal switch, the temperature sensor on the evaporator & the motherboard itself. Everything checked out except the motherboard. Ordered motherboard from Appliance Parts Pros with next day shipping & they did just that! Thank you, appreciate great support there. Once the board arrived in 20 minutes the refrigerator started operating as usual. Read more
The GE Door Light Switch is an OEM Replacement Part that serves as the Freezer Door Fan and Light Switch. The switch is made from metal, wiring, and plastic. It plays an essential role in energy conservation by turning off the light when the refrigerat
Pop out the old switches with a putty knife pressing down on the tab, grabbed with pliers to pull out, disconnect the wires and connect new switches, pressing back in place. Read more
Secures the auger shaft in the icemaker assembly. Replace if stripped, cracked, or loose, preventing proper ice transport from bin to dispenser.
I looked for a site that sold replacement parts for my make of GE refrigerator. I found AppliancePartsPros, and was very surprised at how organized it was. By entering the model number of my refrigerator, I was shown a set of (approximately) 8 general parts diagrams for my refrigerator. I chose the ice making/dispensing diagram. I matched the part that shattered (from use) to what was on the diagram. What I didn't know was how to install the part. I saw references by other customer comments to... Read more
Stops refrigerator door from opening past 90 degrees. Mounts at base of door with screws. Replace if cracked, broken, or bent to prevent door overswing.
The fix involved removing the two bolts holding the broken door stop and bolting in place the new stop. Unless you take the door off, you have to work by feel due to the position of the door stop and the bolts holding the stop in place. A little patience is all that's required. A flip lock designed to keep kids out of cupboards is now in place so the damage won't reoccur. But if it does, its a quick, easy and inexpensive fix. Read more
Fix a refrigerator that won't cool, has no display, or stopped after a power outage. Main control board replacement restores automated cooling cycles.
Good ole Maryland with its 70 degree weather one day and a snow storm the next! 55 mph winds do not have any sympathy with above-ground transformers in a snows storm. The transformer blew - partially... then kept popping causing multiple surges to our homes AND electronics. Power was restored several hours later, however my fridge was not working. After I checked it out, I could see the burnt parts on the PCB board itself. I grabbed the part number and ordered the replacement PCB. When it... Read more
Clear glass cover that sits above the crisper drawer in your refrigerator. Replace if cracked, chipped, or shattered from impact or heavy items.
This story is somewhat unique, on Friday 5/23/14 I was cleaning the frig, when I broke the glass shelf. I went online to purchase a new glass shelf. Parts Pro said they would process my order if confirmed by 4:00 pm. and would ship it same day. I placed the order, and to my amasement the new shelf arrived 22 hours later, yes I said 22 hours. my hat is off to the Parts Pro. Thank you for such fast service, you now have a customer singing your praise as well as life long customer. Read more
Replaces the water filter when filtration isn't needed, maintaining water flow to your ice maker and dispenser. Confirm fit with your model number.
I bought the bypass from appliance parts pros. Read more
Replace your cracked, broken, or missing refrigerator freezer drawer handle. Installs on the front of freezer baskets for convenient access and opening.
I ordered the parts which was easy to order through the internet and received them in a matter of days. I replaced them myself following the video instructions which were easy and simple to understand. Read more
The Fresh Food Lever Assembly is an OEM part for GE refrigerators. It plays a crucial role in the operation of the refrigerator, enabling the smooth adjustment of settings within the fresh food compartment. This lever assembly is responsible for the us
Replaced upper and lower thimble's, lever arm, cam closure. Door stop was not the problem, but ordered it and replaced it too. The door of course has to come off, remove the top hinge, and lift it away. Lubricated moving parts with silicone spray. Be sure and put the door back in the open position, so the lever arm and cam closure can properly interact, then close the door. Remove the plastic grate at the bottom to get at the lever arm. Presto. Problem gone. Don't put excessive weight... Read more