Jvm154dpicc Parts

This turntable motor drives the coupler and glass tray in your microwave, rotating food for more even heating. Replace a failed or noisy motor to restore smooth, consistent tray movement and reduce cold spots during cooking and reheating.

• Drives the center coupler and glass tray to rotate during operation
• Helps ensure even heating by moving food through the microwave energy field
• Direct replacement when the original motor is seized, noisy, or electrically open
• Symptoms include a tray that won't turn, jerky rotation, or a humming/grinding sound from the turntable area

• Disconnect power before servicing; microwaves contain high-voltage components that can retain a dangerous charge
• Access to the motor is typically from the bottom; remove the cover/panel per your model's service information
• Transfer the two wires to the new motor and secure it with the mounting screws; ensure the shaft fully engages the coupler
• After reassembly, test with a cup of water to ensure smooth rotation

Color: brown. It measures about 8-1/2 inches in diameter.

This thermal cut-off installs in the bottom location and protects the appliance by interrupting power when excessive heat is detected. It helps prevent overheating-related damage to internal components.

• Monitors temperature at the bottom of the unit and opens the circuit if an over-temperature condition occurs
• Common symptoms include no power, shutting off during use, or not starting after an overheating event
• The TCO tests open (no continuity), it must be replaced

• Disconnect power before servicing; microwaves contain a high-voltage capacitor that must be safely discharged
• Note wire positions and mounting orientation; transfer any reusable bracket/insulator and make secure, insulated connections
• After reassembly, ensure airflow and vents are unobstructed to prevent repeat overheating

This is the high-voltage magnetron for a microwave oven. It generates the microwave energy that heats food; replacing a weak or failed magnetron can restore normal cooking performance and resolve "runs but no heat" complaints.

• Generates the RF energy that cooks and heats inside the microwave cavity
• Common fix when the microwave runs but does not heat
• Symptoms can include unusually loud humming/buzzing during operation
• Helps with intermittent heating or a burnt odor from a failing tube

• Disconnect power and safely discharge the high-voltage capacitor before servicing
• Note wire locations; transfer any shielding, brackets, or insulators from the original as required
• Mount securely and ensure correct orientation for proper cooling airflow
• After reassembly, test heating with a cup of water

This replacement thermostat monitors internal temperature and opens the circuit if overheating is detected. Restores the appliance's over-temperature protection and can resolve shutoff, no-power, or no-heat issues related to a failed safety thermostat. What it does:

• Monitors temperature and opens the circuit at a set threshold to prevent overheating
• Helps protect internal components from heat damage
• Failure symptoms include: no power, shuts off during/after cooking, runs but doesn't heat, or won't restart until cooled
• May cause intermittent operation following extended or high-heat use when failing

• 1 thermostat

• Disconnect power before servicing; microwave repairs involve dangerous high voltage
• Access the thermostat, note wire positions, and transfer leads to the new part
• Mount flush and secure with the original screws/bracket to ensure proper heat sensing
• Restore power and test; monitor operation to confirm normal cycling and protection

The Turntable Coupler is an OEM part for GE microwaves. This component connects the turntable motor to the microwave's glass tray, enabling the rotation of the tray during cooking. By ensuring even heating and cooking of food, the turntable coupler plays a vital role in the microwave's overall performance.

Causes of a bad turntable coupler can include wear and tear from frequent use, physical damage from heavy or uneven loads on the turntable, or breakage from accidental impacts.

Symptoms of a bad Turntable Coupler include:

• The turntable not rotating
• Uneven cooking or heating of food
• Grinding or clicking noises when the turntable attempts to move
• The glass tray being unstable or slipping off the coupler

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This hardware assembly secures designated components in your appliance, restoring a tight, rattle-free fit after service or wear. Replacing damaged or missing fasteners helps keep panels and parts aligned and operating as designed.

• Provides the correct fasteners/spacers for the specified location on the unit
• Replaces stripped, lost, or corroded hardware
• Helps eliminate looseness, vibration, or rattling noises
• Supports proper alignment and fit of the associated part or panel

• Disconnect power before servicing; allow hot surfaces to cool
• Support the part being fastened to prevent damage or misalignment
• Match each fastener one-for-one; note orientation and any washers/spacers
• Hand-start threads and do not overtighten; verify clearances and operation after install

This flat bolt is a factory fastener used to secure appliance components. Replace a missing, stripped, or corroded bolt to restore a tight, secure assembly and help prevent loosening, rattling, or misalignment during normal operation.

• Fastens panels, brackets, and other components as designed by the manufacturer
• Restores a secure fit when the original hardware is missing or damaged
• Helps reduce looseness and vibration-related noises
• Built to original specifications for proper fit and function

• Disconnect power and allow the unit to cool before servicing
• Support the part being fastened; align holes before inserting the bolt
• Start threads by hand to avoid cross-threading; tighten securely without overtightening
• Reuse any original washers or spacers if present

Guide roller (TT) supports the appliance drum and keeps it aligned for smooth rotation. Replacing a worn guide roller reduces noise, prevents rubbing, and helps restore proper drum tracking. What it does:

• Supports and guides the drum/tub so it spins smoothly and stays centered.
• Reduces metal-on-metal rubbing and squeaking caused by worn rollers or bearings.
• Helps prevent uneven wear on the drum, belt, and seals.
• Improves drum tracking and overall operation when worn or damaged.

• Disconnect electrical power (and turn off gas supply on gas models) before starting any repair.
• Access may require removing the dryer cabinet or drum.
• Inspect other rollers, shafts, bearings, and the drive belt; replace as needed to avoid repeat failures.
• Use appropriate hand tools and support the drum during removal to avoid damage or injury.

This mounting plate assembly is the rear wall bracket that supports and secures the microwave during installation. Replacing a bent or missing plate ensures a safe, level mount and stable operation without vibration or shifting.

• Acts as the rear-wall support the microwave hangs on and bolts to
• Maintains proper, level alignment of the unit and door
• Helps prevent vibration, rattling, or shifting during use
• Replace if the plate is bent, damaged, corroded, or missing

• Disconnect power and have a second person support the microwave before removal/installation
• Follow your model's installation template and manual for hole locations and hardware
• Fasten to wall studs or appropriate anchors; level the plate before tightening
• Verify clearances and door swing before fully tightening mounting hardware

This turntable coupler connects the microwave's turntable motor to the glass tray to drive smooth rotation during cooking. Replacing a worn coupler restores even heating and prevents the tray from slipping, stalling, or wobbling. What it does:

• Transfers rotation from the turntable motor to the glass tray
• Centers and supports the tray for stable, even spinning
• When worn or cracked, may cause the turntable not to turn, slip, wobble, or click/grind at the center hub
• Helps restore consistent heating by ensuring proper tray movement

• 1 turntable coupler

• Disconnect power by unplugging the microwave or switching off the breaker before service
• Remove the glass tray and roller ring; lift the old coupler straight up off the motor shaft
• Align the new coupler with the shaft and press firmly until fully seated

This activated charcoal filter serves the recirculating vent system. It adsorbs cooking odors when air isn't vented outdoors, restoring odor-reduction performance and helping the fan move air freely once the old filter becomes saturated. What it does:

• Adsorbs odors and smoke particles from air recirculated through the vent system
• Helps maintain effective ventilation when the original filter is saturated
• Common signs to replace: persistent odors, reduced airflow, or a dark/greasy/damaged filter
• For models configured for recirculating (non-vented) operation

• One charcoal filter

• Disconnect power to the appliance before servicing
• Remove the vent grille or filter cover to access the charcoal filter (location varies by model)
• Release and remove the old filter; install the new filter in the same orientation and seat fully
• Reinstall covers, restore power, and run the fan to verify airflow

This latch body is the door latch component that secures the appliance door during operation, restoring reliable closure so cycles can run normally. Use it to replace a worn or damaged latch that won't hold the door closed. What it does:

• Engages the door striker to hold the door closed and maintain a proper seal during operation
• Works with the door latch mechanism so the appliance can complete cycles that require a closed door
• Common symptom: door won't stay closed, is difficult to latch, or feels loose at the latch point
• Replacing a damaged latch body can prevent intermittent door-open errors and restore normal door operation

• Disconnect power (unplug or turn off circuit breaker) before starting any repair
• Remove the door or access panel as needed; keep track of fasteners and any trim pieces
• Handle door glass and trim carefully to avoid damage; test latch engagement before full reassembly

Made by GE. This microwave stirrer motor comes with a square shaped shaft and is usually located in the upper part of the microwave. For a D shaped shaft turntable motor order WB26X10038.

This control panel assembly is the front user interface housing for your appliance. Replace a cracked, loose, or damaged panel to restore a secure fit and dependable access to the controls for everyday operation.

• Holds and aligns the keypad, display, and related switches for proper use
• Provides mounting points for the electronic control components
• Protects internal controls from everyday wear and minor impacts
• Helps address issues like a broken bezel, missing tabs, or a loose/misaligned panel
• Restores a clean, factory look to the user interface area

• Disconnect power at the breaker before servicing
• Remove trim/grille and mounting screws; support the panel to avoid stressing wiring
• Transfer any brackets, switches, and display/board from the original panel, noting wire locations
• Reassemble and test all controls before final mounting