Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement upper rack adjuster for dishwashers. Mounts to the upper rack to adjust height and provide flexible loading. Replace if cracked or broken.
I bumped into my KitchenAid dishwasher and the upper rack adjuster cracked. There was already a crack on the notch of the housing where the handle (lever) sits. In addition, the positioner popped out and I couldn't find it. So, I bought the three parts from AppliancePartsPros online. It arrived in about a week. The repair was fairly simple, but it still took about 45 minutes because I didn't want to crack the assemblies. For the housing, use a small slotted screwdriver to carefully... Read more
Lower dishrack wheel assembly for dishwashers. Includes mounting bracket and wheels. Replace when wheels are broken, cracked, or rack won't roll smoothly.
I ordered 4 of this part from AppliancePartsPros.com and watched the repair video of the product. This was a simple repair that took 10 minutes to replace all 4 wheel units on the bottom rack. Product is exact match to the part I replaced. Read more
Prevents water leaks around your dishwasher door. Replace if you notice pooling water on the floor or visible cracks in the seal. Verify fit by model number.
I called to ask about the correct gasket for the door. As VERY helpful lady suggested that it was probably a split arm spray. She was absolutely correct. I have used you web site for parts in the past and will always make it my first stop when ordering appliance parts. Read more
Replacement roller assembly for dishwasher lower rack. Snaps into place to restore smooth gliding. Needed when wheels break off, crack, or fall out.
Installed 2 new dishrack roller assemblies. The only tools I needed were my fingers, snapped the old assemblies out and snapped the assemblies in. Read more
Dishwasher lower door seal prevents water leaks at the door base. Replace if you notice dripping or moisture during wash cycles. Confirm fit with your model.
Thanks to Jason and his tech people at Appliance Parts Pro, I was able to remove and replace the seal and eliminate all leaks at the bottom of the door. I have a Kitchenaide (Whirlpool) dishwasher model KUDC10IXBL1. Here is how to replace the bottom door seal. 1) Shut off breaker to dishwasher on the electrical panel. 2) Open the dishwasher door completely, and while supporting the door, remove the hex head screws that hold the outside cover. 2) Close the door carefully and slip the outside... Read more
Door balance link kit for dishwashers. Connects door springs to control door movement. Replace if rope is frayed, broken, or plastic clips are cracked or worn.
I finally decided to repair my dishwasher because the door would free fall to the floor possibly breaking the hinges. Also the top shelf was rolling out on its own every time the door was opened. I first pulled the dishwasher out of the enclosure and found that the drain hose was directly under the pump area throwing the unit completely out of level. Also the inadequate plastic and rope counterbalance on the left side was completely broken where the rope was attached to the plastic piece to the... Read more
Dishwasher not draining or has standing water at end of cycle? This drain pump removes wastewater efficiently. Easy DIY repair, no tools needed.
I've opened sump housing to check for clogging but it was clean. When I removed check valve to inspect it I've found out that the round part of the valve was missing so I figured it might've blocked the water exit at drain hose or something like that. So I pulled the dishwasher out to get a full access to drain hose connector and the pump. Upon disconnecting the drain and checking its connector I indeed found the round piece totally blocking the hose and acting as a seal. I removed the piece... Read more
Fix dishwasher not filling with water or slow fill issues. This inlet valve controls water flow into your dishwasher. DIY repair typically takes 15-30 minutes.
Replaced the water solenoid. Read more
Dishwasher not dispensing soap or dispenser door won't open? This detergent dispenser fixes dispensing failures. Moderate DIY repair, about 30-45 minutes.
The part went on easily. U Tube video answered any questions I had before installing. Read more
Replacement pivot for dishwasher upper rack tine rows. Allows tines to fold down for taller items. Needed when pivot is broken, cracked, or missing.
Ordered a new one. It took about 10 seconds to install. Now it’s like brand new. Read more
Dishes not drying or water not heating? This dishwasher heating element restores drying and cleaning performance. DIY-friendly repair, about 1 hour.
Followed the Appliance Parts Pros video and it took me about an hour from start to finish. I felt like the job was easy to accomplish. Read more
Clips onto the upper dishrack to hold the height adjuster assembly in place for balanced operation. Replace if cracked, broken, or missing.
Right-hand track assembly that guides the upper dishwasher rack as it slides in and out. Replace if cracked, broken, or ball bearings fall out.
Ordered numerous replacement parts. Started with the tracks which required pulling the washer out of the cabinet to reach the screws. Pushed it back in and re-secured. Then stared on the rack and replaced the rack adjusters and various clips. Everything is straight forward and easy to replace. I originally called a local repair place to have them repair it. They came out and said they needed to order parts and they would call back. A week went by and I followed up with them. Had to leave... Read more
Left-hand track assembly guides and supports your dishwasher's upper rack as it slides. Replace if cracked, broken, or ball bearings have fallen out.
If your dishwasher door won't stay closed or latch properly, this door latch assembly is the likely fix. Easy DIY repair takes about 1 hour to complete.
Changed the door switch and the dishwasher works now. Read more
Fix dishwasher leaking from the motor area with this motor to sump seal. Creates a watertight connection between pump and sump. Takes 10-20 minutes.
My dishwasher was leaking and I called to have a certified technician come to diagnose the problem. I removed the kick panel from the bottom of the machine. He turned it on and we saw that water was leaking from the bottom. He said I needed a Sump kit but it wasn't in stock. The cost was $170 plus tax and labor cost was another $140. So I talked it over with dad and ordered the Sump kit, the hose clamp and a new diverter motor as mine was yellowed with age. The cost of all these parts and... Read more